Sandhya Enterprises manufacturer and Supplier of Neoprene Bridge Bearing Pad as per IRC 83 (Part II}2018 specification
Offering the finest Elastomeric Bridge Bearing, Sandhya Flex takes pleasure as a leading manufacturer of the products. We have segregated our infrastructure into several units with one of them as packaging unit. Here we meticulously pack our Elastomeric Bridge Bearing to ensure safe and secure deliverables. For the safe storage of the manufactured products, we have installed our facility equipped with all the modern amenities for absolute quality satisfaction.
The features of the elastomeric bridge bearing involve a strong design, simple installation and high quality. Also, it allows movement in all the directions you desire. Moreover, it finds it application in bridges, auditoriums, buildings and stadiums among others. They have exceptional tensile strength along with good elongation strength.
They are easy to install for various applications. Above all, they require less maintenance as well. They are precisely manufactured by specialists and experts as per the national and international norms and standards. Also, we use premium quality raw material to manufacture these elastomeric bridge bearing which are sourced from reliable vendors. Further, we assure the best quality, superior performing, durable and energy-efficient elastomeric bridge bearing which you can get from Sandhya Flex at competitive prices in the market.
Elastomeric Bridge Bearing Features :Use : Allows movement in any direction
Elastomeric Bridge Bearing Applications :Elastomeric Bridge Bearing Technical Details :
Sr No. | Test | Unit | Specification and Testing Method | Specimens |
---|---|---|---|---|
1 | Hardness | IRHD | IS: 3400 (Part II) Cl.5.1.2.2 | 4.0mm (min ) thickness of Test specimen |
2 | Tensile Strength | MPa | IS:3400 ( Part I) | Thick- 2.0 +.0.20mm |
3 | Elongation at Break | % | Table 1 Type -1 | Width 6.0 + 0.40mm Bench Mark-25..0mm (max) |
4 | Adhesion Strength (Metal to Rubber | KN/M | IS:3400 ( Part XIV) Cl.3.3 | Length -125mm Width-25mm Width-25mm 1 g (min) |
5 | Ash Content | % | IS:3400 (Part XXII) | 1 g (min) |
6 | Polymer Identification | Chemically | Cl. A-8.3.1 IS | |
7 | Percentage of Polymers | % | IS | 0.5 g (min) |
8 | Compression Set | % | IS: 3400 (Part X) Cl. 5.1 | Thick -12.5 + 0.50mm |
9 | Elastic Modulus | MPa | IRC 83 (Part II) | Dia-29 + 0.50mm 2 Nos from Finish |
10 | Shear Modulus | MPa | 1987, UIC 772 -2R | Product |
11 | Ultimate Compression Strength | MPa | and MORTH | One Specimen size of 100x200mm (Cutting Piece from Finish product.) |
12 | Stripping Strength (Adhesion Strength) | MPa | Two Specimen size of 100x 100mm (Cutting from Finish Product) | |
13 | 5MPa and 15 MPa Deflection Test | MPa | IRC 83 (Part II) 1987, and MORTH |
Minimum Order Quantity | 2500000 Cubic Centimeter |
Usage/Application | Bridge Construction |
Hardness | 55 to 65 IRHd |
Compressive Strength | 17.0MPa min |
Material | Rubber and Steel Laminate |
Shape | Shape factor for elastic modulus 6 to 12 |
Color | Black |
Thickness | 22mm to 144mm |
We are offering a wide range of Rubber Bridge Bearing.
Elastomeric Bridge Bearing the company has segregated its infrastructure into several units and one of them is packaging unit wherein we meticulously pack our Elastomeric Bridge Bearing for ensuring safe and secure deliveries. For the safe storage of the entire lot, we have installed our own facility that is laced with all the modern amenities for complete quality satisfaction.
Elastomeric Bridge Bearing Features :
Use : Allows movement in any direction
Elastomeric Bridge Bearing Applications :
Bank Details |
|
COMPANY NAME |
SANDHYA ENTERPRISES |
Bank |
HDFC Bank Ltd |
Branch |
5-80,HMT Road,Chintal, Jeedimetla,Qutubulapur Mandal Dist. R R ,Hyderabad-500054 Telangana |
Account No |
50200016352482 |
IFSC |
HDFC0001041 |
PAN No |
GNLPS1299P |
GST N0 |
36GNLPS1299P1ZS |
IEC |
0916915042 |
AD Code |
05114228381149 |
MSME |
TS20B0028147 |
|
|
Minimum Order Quantity | 1250000 Cubic Centimeter |
Hardness | 55 to 65 Shore A |
Temperature Range | -10 to 100 Deg C |
Part Number | Properties of Elastomer Physical Properties Unit Specified Test Method 1 Hardness IRHD 60 +5 IS:3400 |
Material | Rubber and MS Plate |
Size | Properties of Elastomer Physical Properties Unit Specified Test Method 1 Hardness IRHD 60 +5 IS:3400 |
Compressive Strength | As per customers requirement |
Type of Bearing | ELASTOMERIC DESIGN3D Engineering Simulation in Bridge Design Finite element analysis of a bridge ela |
Shape | Squire |
Breath | Properties of Elastomer Physical Properties Unit Specified Test Method 1 Hardness IRHD 60 +5 IS:3400 |
Bearing Number | ELASTOMERIC DESIGN3D Engineering Simulation in Bridge Design Finite element analysis of a bridge ela |
Dimension | As per customers requirement |
Capacity | Properties of Elastomer Physical Properties Unit Specified Test Method 1 Hardness IRHD 60 +5 IS:3400 |
Size/Dimension | 500 x 360 x 96 mm |
Weight | ELASTOMERIC DESIGN3D Engineering Simulation in Bridge Design Finite element analysis of a bridge ela |
Load Capacity | 10MPA |
Surface Finishing | Manufacturing Tolerances Sr.No. Items Tolerances 1 Overall Linear Plan Dimensions -0mm,+6mm 2 Total |
Usage/Application | Bridge Construction |
Compression Set Temperature | 100 Deg C for 24 Hrs |
Compression Strength | 25% max |
Elongation At Break | 400% min |
Tensile Strength | 17.0 MPa |
Working Temperature | 27 to 50 Deg C |
Length | Manufacturing Tolerances Sr.No. Items Tolerances 1 Overall Linear Plan Dimensions -0mm,+6mm 2 Total |
Bearing Series | Properties of Elastomer Physical Properties Unit Specified Test Method 1 Hardness IRHD 60 +5 IS:3400 |
Tolerance | Manufacturing Tolerances Sr.No. Items Tolerances 1 Overall Linear Plan Dimensions -0mm,+6mm 2 Total |
Thickness | As per customers requirement |
Surface Finished | Manufacturing Tolerances Sr.No. Items Tolerances 1 Overall Linear Plan Dimensions -0mm,+6mm 2 Total |
Color | Black |
|
|
|
|
Why are US
* Best Comunication
* Good Responce
*.Good Price
* Good Quality
* Timely Delivery
*.Good Transport Facility
So why are delay pl contact to SANDHYA ENTERPRISES and start today your Business with us. Elastomeric Bridge Bearing the company has segregated its infrastructure into several units and one of them is packaging unit wherein we meticulously pack our Elastomeric Bridge Bearing for ensuring safe and secure deliveries. For the safe storage of the entire lot, we have installed our own facility that is laced with all the modern amenities for complete quality satisfaction.
Use : Allows movement in any direction
Elastomeric Bridge Bearing Applications :
Finite element analysis of a bridge elastomeric bearing pad carried out with SimScale
Because bridge elastomeric bearing pads are crucial for a safe and cost-effective bridge design, they are extensively prototyped and tested before they are used in production.
Using a simulation software like SimScale as part of the process, it is possible to virtually test an elastomeric bearing pad under different design and load assumptions. For example, the bearing pad can be assumed to be composed of an elastomeric material reinforced by steel plates, and three basic load cases can be simulated and observed: 1) compression, 2) compression with shearing,
Minimum Order Quantity | 1000000 Cubic Centimeter |
Usage/Application | Bridge Construction |
Hardness | 55 to 65 Shore A |
Temperature Range | 100 Deg C max |
Color | Black |
Material | Rubber |
Brand | Sandhyaflex |
Compressive Strength | 60MPa min |
Packaging Type | Packing with HDPE cover |
Shape | Squire |
Breath | Bridge Consturction |
Size/Dimension | Thickness-22mm to 144mm, Width-100 to 1000mm andLength 160 to 1500mm |
Diameter | as per IRC 83 (Part II)2018 |
Standards | IRC 83 (Part II)2018 |
Length | 1500mm max |
Tensile Strength | 17.0mm min |
Size | 500 x 320 x 80 mm |
Compression Set Temperature | @100 Deg C for 24hrs |
Elongation At Break | 400% min |
Feature | Good Weather and Ozone Resistance |
Load Capacity | 10 MPa to 20 MPa |
Surface Finishing | Smooth |
Thickness | 22 to 144mm |
Working Temperature | at 27 to 100Deg C max |
PTFE POT Bearing | Rs.45000 |
Sandhya Enterprises is a Manufacturer and Supplier of 500x320x80mm Rubber Bridge Bearing Pad.
BUSINESS POLICY
SANDHYA ENTERPRISES AN ISO:9001:2015 Certified Company
Inquiry
Quotation
Purchase Order
1. Billing Address. 2. Delivery Address 3. GST No 4. Contact No
Performa Invoice
Advance Payment
Take in Production as per Purchase Order
After Completed Consignment Inform to Client for Balance Payment
Dispatch the Material
Provide LR Copy
Bank Details |
|
COMPANY NAME |
SANDHYA ENTERPRISES |
Bank |
HDFC Bank Ltd |
Branch |
5-80,HMT Road,Chintal, Jeedimetla,Qutubulapur Mandal Dist. R R ,Hyderabad-500054 Telangana |
Account No |
50200016352482 |
IFSC |
HDFC0001041 |
PAN No |
GNLPS1299P |
GST N0 |
36GNLPS1299P1ZS |
IEC |
0916915042 |
AD Code |
05114228381149 |
MSME |
TS20B0028147 |
|
|
Why are US
* Best Comunication
* Good Responce
*.Good Price
* Good Quality
* Timely Delivery
*.Good Transport Facility
So why are delay pl contact to SANDHYA ENTERPRISES and start today your Business with us.
Thanks for Visit to SANDHYA ENTERPRISES Hyderabd Telanagana India
*Your information is safe with us.
Minimum Order Quantity | 150000 Cubic Centimeter |
Type of Bearing | Elastomeric Bridge Bearing |
Usage/Application | Bridge Construction |
Hardness | Physical Properties Unit Specified Test Method 1 Hardness IRHD 60 +5 IS:3400 (Part II) 2 Minimum Ten |
Temperature Range | 100 Degree C |
Color | Black |
Material | Rubber |
Brand | Sandhyaflex |
Compressive Strength | 60 MPa min |
Packaging Type | ypical Size of Laminated Bearings Sr. No. Dimension EBB Dimension SL No of |
Shape | Physical Properties Unit Specified Test Method 1 Hardness IRHD 60 +5 IS:3400 (Part II) 2 Minimum Ten |
Breath | ypical Size of Laminated Bearings Sr. No. Dimension EBB Dimension SL No of |
Size/Dimension | Thickness 22 to 144mm,Width 200 to 1000mm,Length-200 to 1500mm |
Standards | Manufacturing Tolerances Sr.No. Items Tolerances 1 Overall Linear Plan Dimensions -0mm,+6mm 2 Total |
Diameter | ypical Size of Laminated Bearings Sr. No. Dimension EBB Dimension SL No of |
Length | ypical Size of Laminated Bearings Sr. No. Dimension EBB Dimension SL No of |
Capacity | ypical Size of Laminated Bearings Sr. No. Dimension EBB Dimension SL No of |
Compression Set Temperature | Manufacturing Tolerances Sr.No. Items Tolerances 1 Overall Linear Plan Dimensions -0mm,+6mm 2 Total |
Compression Strength | Manufacturing Tolerances Sr.No. Items Tolerances 1 Overall Linear Plan Dimensions -0mm,+6mm 2 Total |
Dimension | ypical Size of Laminated Bearings Sr. No. Dimension EBB Dimension SL No of |
Elongation At Break | 400% min |
Surface Finished | ypical Size of Laminated Bearings Sr. No. Dimension EBB Dimension SL No of |
Tensile Strength | 17.0MPa min |
Thickness | ypical Size of Laminated Bearings Sr. No. Dimension EBB Dimension SL No of |
Tolerance | Manufacturing Tolerances Sr.No. Items Tolerances 1 Overall Linear Plan Dimensions -0mm,+6mm 2 Total |
Physical Properties | Unit | Specified | Test Method | |
1 | Hardness | IRHD | 60 +5 | IS:3400 (Part II) |
2 | Minimum Tensile Strength (Moulded Test Piece, Test Piece from Bearing | MPa | 17.0 14.0 | IS:3400 (Part I) |
3 | Minimum Elongation at Break (Moulded Test Piece, Test Piece from Bearing | % | 400 350 | IS:3400 (Part I) |
4 | Maximum Compression Set (24h,100 +1oC) | % | 35 | IS:3400 (Part X) |
Accelerated aging (72h,100 +1oC) Maximum Change from un-aged Value | ||||
5 | Maximum Change in Hardness | IRHD | +5 | IS:3400 (Part IV) |
6 | Maximum Change in Tensile Strength | % | -15 | IS:3400 (Part IV) |
7 | Maximum Change in Elongation | % | -30 | IS:3400 (Part IV) |
Minimum Order Quantity | 200 Tonne |
Color | Silver |
Wire Material | Mild Steel |
Quantity Per Pack | >50 kg |
Gauge | 20 |
Part Number | as per Customer Drg |
Material | Steel |
Wire Color | Silver |
Type of Bearing | as per Customer |
Brand | TATA and JINDAL |
Wire Gauge Mm | 18 and 20 SWG |
Bearing Number | as per Customer |
Weight | as per Customer |
Surface Finishing | Smooth |
Thickness | 18 SWG and 20 SWG |
Usage/Application | Construction |
Features | Long Elstic rust Proof |
Bearing Series | Binding Wire |
Country of Origin | Made in India |
Sandhya Enterprises is one of the leading manufacturers and suppliers of PTFE POT Bearings. We manufacture wide range of bearings as per the client’s requirements. We, at Sandhya enterprises manufacture products using premium quality raw material and innovative technology. The design and size of the POT Bearings will be based on our client’s needs. Our personnel will ensure that products are quality tested on various parameters to make sure the product is durable with given accurate dimensions.
We manufacture Pot PTFE Bearings- including sliding guided pot bearings, fixed pot bearings and free sliding pot bearings as per the international standards. The elements of Pot PTFE bearings contains a shallow steel cylinder, which is known as ‘POT’ and an elastometric disc will confines at the centre. Even if the pot bearings are fixed in unidirectional or multidirectional, they can carry the loads in both the vertical and horizontal combinations and also includes longitudinal and transverse displacements.
Features
Minimum Order Quantity | 180000 Cubic Centimeter |
Hardness | 55 to 65 Shore A |
Temperature Range | 100 Degree C |
Material | Rubber |
Compressive Strength | 60 MPa min |
Size/Dimension | 22mm to 144mm |
Usage/Application | Bridge Construction |
Length | 160mm to 1500mm |
Tensile Strength | 17.0MPa |
We provide high quality Bridge Bearing Rubber Pad, also called neoprene bridge bearings, Bridge Bearing and elastomeric bearings. These bearings are manufactured using high grade materials (CR, Black Carbon Reinforcement, and Other Chemical with the aid of contemporary techniques at our advanced production unit. The bearings provide adequate support to bridges for absorbing vibrations and preventing their deformation. In addition, we offer these Elastomeric Bridge Bearings at reasonable prices.
*Your information is safe with us.
Minimum Order Quantity | 10 Metric Ton |
Type of Bearing | Pot PTFE Bridge Bearing |
Bearing Number | ELASTOMERIC BEARING PADConclusion As we have seen, designing elastomeric bearing pads using simulati |
Weight | As per customers requirent |
Dimension | 250 to 1500 mt |
Usage/Application | Road,Bridges,Auditoriums,Skywalks |
Part Number | ELASTOMERIC BEARING PADConclusion As we have seen, designing elastomeric bearing pads using simulati |
Material | PTFE |
Brand | Sandhyafelx |
Bearing Series | Properties of Elastomer Physical Properties Unit Specified Test Method 1 Hardness IRHD 60 +5 IS:3400 |
Shape | Square,Rectangular |
Compressive Strength | Properties of Elastomer Physical Properties Unit Specified Test Method 1 Hardness IRHD 60 +5 IS:3400 |
Packaging Type | ELASTOMERIC BEARING PADConclusion As we have seen, designing elastomeric bearing pads using simulati |
Size/Dimension | As per customer requirement |
Standards | ELASTOMERIC BEARING PADConclusion As we have seen, designing elastomeric bearing pads using simulati |
Color | Black |
Breath | As per customers requirement |
Approval | Typical Size of Laminated Bearings Sr. No. Dimension EBB Dimension SL No of |
Capacity | As per customers requirement |
Load Capacity | Typical Size of Laminated Bearings Sr. No. Dimension EBB Dimension SL No of |
Compression Set Temperature | 100 Deg C for 24hrs |
Surface Finishing | Smooth |
Compression Strength | As per customers requirement |
Thickness | As per customers requirement |
Type | Bridge Beariong |
Hardness | As per customers requirement |
Length | As per customers requirement |
Surface Finished | Smooth |
Tolerance | Typical Size of Laminated Bearings Sr. No. Dimension EBB Dimension SL No of |
Elastomeric Bridge Bearing the company has segregated its infrastructure into several units and one of them is packaging unit wherein we meticulously pack our Elastomeric Bridge Bearing for ensuring safe and secure deliveries. For the safe storage of the entire lot, we have installed our own facility that is laced with all the modern amenities for complete quality satisfaction.
Elastomeric Bridge Bearing Features :Use : Allows movement in any direction
Elastomeric Bridge Bearing Applications :
Sr No. | Test | Unit | Specification and Testing Method | Specimens |
---|---|---|---|---|
1 | Hardness | IRHD | IS: 3400 (Part II) Cl.5.1.2.2 | 4.0mm (min ) thickness of Test specimen |
2 | Tensile Strength | MPa | IS:3400 ( Part I) | Thick- 2.0 +.0.20mm |
3 | Elongation at Break | % | Table 1 Type -1 | Width 6.0 + 0.40mm Bench Mark-25..0mm (max) |
4 | Adhesion Strength (Metal to Rubber | KN/M | IS:3400 ( Part XIV) Cl.3.3 | Length -125mm Width-25mm Width-25mm 1 g (min) |
5 | Ash Content | % | IS:3400 (Part XXII) | 1 g (min) |
6 | Polymer Identification | Chemically | Cl. A-8.3.1 IS | |
7 | Percentage of Polymers | % | IS | 0.5 g (min) |
8 | Compression Set | % | IS: 3400 (Part X) Cl. 5.1 | Thick -12.5 + 0.50mm |
9 | Elastic Modulus | MPa | IRC 83 (Part II) | Dia-29 + 0.50mm 2 Nos from Finish |
10 | Shear Modulus | MPa | 1987, UIC 772 -2R | Product |
11 | Ultimate Compression Strength | MPa | and MORTH | One Specimen size of 100x200mm (Cutting Piece from Finish product.) |
12 | Stripping Strength (Adhesion Strength) | MPa | Two Specimen size of 100x 100mm (Cutting from Finish Product) | |
13 | 5MPa and 15 MPa Deflection Test | MPa | IRC 83 (Part II) 1987, and MORTH | 100% on finish Product. |
As we have seen, designing elastomeric bearing pads using simulation software play a crucial role in bridge safety, dependability, and longevity. If you want to give it a try, create a free Community account here and then copy this template of an elastomeric bearing pad simulation, change the settings or the CAD model and perform your own analysis.
You can learn more about the role of engineering simulation in construction applications by downloading a free infographic here.
Set up your own simulation via web in minutes by creating a free account on the SimScale platform. No installation, special hardware or credit card is required.
The Bay Bridge was designed to withstand earthquakes by implementing technology that allowed the bridge to adapt to such dramatic environmental instances. In fact, all bridges are designed to be moderately flexible with an embedded “bend or break” design philosophy; it is assumed that the bridge will be
The San Francisco-Oakland Bay Bridge
Minimum Order Quantity | 10 Metric Ton |
Type of Bearing | Neoprene Bridge Bearing |
Dimension | 300 to 130 MT |
Usage/Application | Road,Bridges,Auditoriums,Skywalks |
Material | PTFE |
Brand | Sandhyaflex |
Shape | Rectangular |
Use : Allows movement in any direction
Pot PTFE Road Bridge Bearing Applications :
Minimum Order Quantity | 100 Number |
Thickness | 12mm to 25mm |
Color | Black |
Position | Exterior |
Material | Rubber |
Application Industry | Construction |
Brand | Sandhyaflex |
Dimension | Type of Elatomeric Bearing S.No Type Description Images 1 A Plain Pad/ Strip Bearing 2 B Laminat |
Shape | Square |
Pressure Load | 200 to 300kgs |
Series | As per customer requirement |
Tensile Strength | 12 MPa |
Weight | As per customer requirement |
Temperature | -10 to 100 Deg C |
Features | Weather Resistance |
Hardness | 55 to 65 Shore A |
Usage/Application | Bridge |
Size | 150mm |
Warranty | 6 Month |
Country of Origin | Made in India |
BUSINESS POLICY
SANDHYA ENTERPRISES AN ISO:9001:2015 Certified Company
Inquiry
Quotation
Purchase Order
1. Billing Address. 2. Delivery Address 3. GST No 4. Contact No
Performa Invoice
Advance Payment
Take in Production as per Purchase Order
After Completed Consignment Inform to Client for Balance Payment
Dispatch the Material
Provide LR Copy
Bank Details |
|
COMPANY NAME |
SANDHYA ENTERPRISES |
Bank |
HDFC Bank Ltd |
Branch |
5-80,HMT Road,Chintal, Jeedimetla,Qutubulapur Mandal Dist. R R ,Hyderabad-500054 Telangana |
Account No |
50200016352482 |
IFSC |
HDFC0001041 |
PAN No |
GNLPS1299P |
GST N0 |
36GNLPS1299P1ZS |
IEC |
0916915042 |
AD Code |
05114228381149 |
MSME |
TS20B0028147 |
|
|
Why are US
* Best Comunication
* Good Responce
*.Good Price
* Good Quality
* Timely Delivery
*.Good Transport Facility
So why are delay pl contact to SANDHYA ENTERPRISES and start today your Business with us.
*Your information is safe with us.
Minimum Order Quantity | 10 Metric Ton |
Type of Bearing | PTFE POT Beaing |
Bearing Number | as per Customer Drg |
Weight | as per Dimension |
Dimension | as per Customer Drg |
Part Number | as per Customer Drg |
Material | PTFE |
Brand | Sandhyaflex |
Bearing Series | Role of the Elastomeric Bearing Pad Bridge flexibility is primarily achieved by a component called b |
Shape | Rectangular |
Usage/Application | Bridge Bearing |
Warranty | 6 Month |
Color | Grey |
Compression Set Temperature | Role of the Elastomeric Bearing Pad Bridge flexibility is primarily achieved by a component called b |
Elongation At Break | 400%max |
Breath | Typical Size of Laminated Bearings Sr. No. Dimension EBB Dimension SL No of |
Approval | RDSO |
Capacity | Role of the Elastomeric Bearing Pad Bridge flexibility is primarily achieved by a component called b |
Feature | Typical Size of Laminated Bearings Sr. No. Dimension EBB Dimension SL No of |
Load Capacity | 10MPa |
Hardness | 55 to 65 Shore A |
Compression Strength | 25% max |
Surface Finishing | Role of the Elastomeric Bearing Pad Bridge flexibility is primarily achieved by a component called b |
Thickness | Manufacturing Tolerances Sr.No. Items Tolerances 1 Overall Linear Plan Dimensions -0mm,+6mm 2 Total |
Type | Role of the Elastomeric Bearing Pad Bridge flexibility is primarily achieved by a component called b |
Temperature Range | -10 to 50 Deg C |
Tensile Strength | 17.0MPa |
Surface Finished | Smooth |
Working Temperature | -10 to 50 Deg C |
Tolerance | Manufacturing Tolerances Sr.No. Items Tolerances 1 Overall Linear Plan Dimensions -0mm,+6mm 2 Total |
BUSINESS POLICY
SANDHYA ENTERPRISES AN ISO:9001:2015 Certified Company
Inquiry
Quotation
Purchase Order
1. Billing Address. 2. Delivery Address 3. GST No 4. Contact No
Performa Invoice
Advance Payment
Take in Production as per Purchase Order
After Completed Consignment Inform to Client for Balance Payment
Dispatch the Material
Provide LR Copy
Bank Details |
|
COMPANY NAME |
SANDHYA ENTERPRISES |
Bank |
HDFC Bank Ltd |
Branch |
5-80,HMT Road,Chintal, Jeedimetla,Qutubulapur Mandal Dist. R R ,Hyderabad-500054 Telangana |
Account No |
50200016352482 |
IFSC |
HDFC0001041 |
PAN No |
GNLPS1299P |
GST N0 |
36GNLPS1299P1ZS |
IEC |
0916915042 |
AD Code |
05114228381149 |
MSME |
TS20B0028147 |
|
|
Why are US
* Best Comunication
* Good Responce
*.Good Price
* Good Quality
* Timely Delivery
*.Good Transport Facility
So why are delay pl contact to SANDHYA ENTERPRISES and start today your Business with us.
Four Type of Test Conducted on Finish Bearing after 7 day of Manufacturing before 6 month as per specification
1. Elastic Modula’s Test.
2. Shear Modula’s Test.
3.
Minimum Order Quantity | 10 Metric Ton |
Dimension | 300 to 1500 MT |
Usage/Application | Road,Bridges,Auditoriums,Skywalks |
Material | PTFE |
Brand | Sandhyaflex |
Shape | Rectangular |
Minimum Order Quantity | 10 Metric Ton |
Type of Bearing | Bridge Bearing |
Weight | As per customer requirement |
Dimension | 250 to 1000 MT |
Material | PTFE |
Brand | Sandhyaflex |
Usage/Application | Bridge Construction |
Color | Grey |