Bridge Strip Seal Expansion Joint

Sandhya Enterprises AN ISO: ISO:9001:2015 Certisfied Company is manufacturer and Supplier of Strip Seal Expansion Joint as per IRC (83 (Part II)2018, MoRTH and UIC 772 2R Specification  Gap 40mm and 70 to 80mm movement, 65mm and 75 mm Edges Beamd with 16mm Anchoring Rod, Neoprene Rubber Strip as per IRC 83 (Part II) 2018 Specificaiton
Strip Seal Expansion Joint
F Type
M Type
T Type
W Type

Bridge Expansion Joint Gap 40.0mm (Movement up to 80mm). Bridge Expansion Joint consist of two edge beams with anchorages and with Neoprene sealing element held firmly in the housing of edge beams that guarantee the water tightness the joint. The maximum gap between the edge beams at the road surface when the joint fully opens due to maximum contractions of the deck shall be limited to 80mm for comfortable passage of traffic. The edge beams protects the adjacent bridge deck concrete from damage due to vehicular impact and also transfer the vehicular loads to the deck structures through robust anchorage system. Typical Bridge Expansion Joint is shown in the figure below.·         record.

·         Cost effective solution.

·         Ease of installation.

·         No mechanical anchors or metal components. Installed by compressing the seal into place.

·         Flat top surface.

·         Non-serrated top provides a smooth riding surface.

·         Neoprene  rubber.

·         Provides excellent resistance to weather, sunlight, UV, and chemical (Neoprene only).

Sandhya Enterprises AN ISO 9001 2015 Certified Company of manufacturer and supplier of 16mm Dia Anchoring Rod Strip Seal Expansion Joint For Bridge.

The Strip Seal Expansion Joint system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic. In all types of constructive systems there is clear distinction between the two main functions "inflexible anchoring" and "watertight connection“. This allows for best possible adjustment of the two components sealing profile and edge construction to the conditions of the traffic road.

Strip Seal Expansion Joint Key Features:

• Mechanically Locked Seal
 
• Continuous Sealing Elements
 
• Racking movement capability (Selective profile of Sealing Element)
 
• Self Debris Expelling Capability
 
• Less prone to Abrasion

Strip Seal Expansion Joint Description :

The Bridge deck expansion joints is an important element in the functioning of bridge structures. When joints fail to fnction properly they can create problem out of proprtion to their size. Selection of a good joints for use can create fewer bridge maintenance problems there for Indian Ministery of Roads Transport & Highways (MORT& H ) has setup certain guidelines for the Design, Manufacture and Installation of Strip Seal Expansion Joint in India.

Types Of Strip Seal Expansion Joint we Design, Manufacture, Supply, Replace, Supervision & Installation

COMPRESSION SEAL JOINT:

is used for smaller range movements from 0 to 40mm. It consist of two angles with an elastomeric seal. The seal is installed in compressed position This Joint is ideal for replacement of old joint and for new project.

Strip Seal Expansion Joint :

Strip Seal Expansion Joint is used for medium movement from 0 to 80mm. It consists of two edge profiles with an elastomeric seal in between. The edge profiles are generally cast into a noising of the structure. These Strip Seal Expansion Joint are expected performance life more than twenty five years. This is most popular and expected joint system among Bridge Consultants and Engineers worldwide.

MODULAR STRIPE SEAL EXPANSION JOINT :

Modular Strip Seal Expansion joint is used for large movement from 0 to 2000mm. In addition to edge profiles, it has a series of supported intermediate beams and sseaks in a modular way to accommodate the movement of the joints. Each seal have a capacity to accommodate movement upto 80mm.

We are offering a wide range of 100mm Edges Beam Compression Seal Expansion Joint.

·         Proven record.

·         Cost effective solution.

·         Ease of installation.

·         No mechanical anchors or metal components. Installed by compressing the seal into place.

·         Flat top surface.

·         Non-serrated top provides a smooth riding surface.

·         Neoprene  rubber.

Bridge Expansion Joint Gap 40.0mm (Movement up to 80mm). Bridge Expansion Joint consist of two edge beams with anchorages and with Neoprene sealing element held firmly in the housing of edge beams that guarantee the water tightness the joint. The maximum gap between the edge beams at the road surface when the joint fully opens due to maximum contractions of the deck shall be limited to 80mm for comfortable passage of traffic. The edge beams protects the adjacent bridge deck concrete from damage due to vehicular impact and also transfer the vehicular loads to the deck structures through robust anchorage system. Typical Bridge Expansional Expansion Joint- Sandhya Enterprises an ISO 9001:2015 Certified Company manufacturing and supplier an Exporter of Slab Seal Expansion as per MORTH

The Compression Seal Expansion Joint system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic. In all types of constructive systems there is clear distinction between the two main functions "inflexible anchoring" and "watertight connection“. This allows for best possible adjustment of the two components sealing profile and edge construction to the conditions of the traffic road.

Strip Seal Expansion Joint Key Features:

• Mechanically Locked Seal
 
• Continuous Sealing Elements
 
• Racking movement capability (Selective profile of Sealing Element)
 
• Self Debris Expelling Capability
 
• Less prone to Abrasion

Strip Seal Expansion Joint Description :

The Bridge deck expansion joints is an important element in the functioning of bridge structures. When joints fail to fnction properly they can create problem out of proprtion to their size. Selection of a good joints for use can create fewer bridge maintenance problems there for Indian Ministery of Roads Transport & Highways (MORT& H ) has setup certain guidelines for the Design, Manufacture and Installation of Strip Seal Expansion Joint in India.

Types Of Strip Seal Expansion Joint we Design, Manufacture, Supply, Replace, Supervision & Installation

COMPRESSION SEAL JOINT:

is used for smaller range movements from 0 to 40mm. It consist of two angles with an elastomeric seal. The seal is installed in compressed position This Joint is ideal for replacement of old joint and for new project.

Strip Seal Expansion Joint :

Strip Seal Expansion Joint is used for medium movement from 0 to 80mm. It consists of two edge profiles with an elastomeric seal in between. The edge profiles are generally cast into a noising of the structure. These Strip Seal Expansion Joint are expected performance life more than twenty five years. This is most popular and expected joint system among Bridge Consultants and Engineers worldwide.

MODULAR STRIPE SEAL EXPANSION JOINT :

Modular Strip Seal Expansion joint is used for large movement from 0 to 2000mm. In addition to edge profiles, it has a series of supported intermediate beams and sseaks in a modular way to accommodate the movement of the joints. Each seal have a capacity to accommodate movement upto 80mm.

·         Proven record.

·         Cost effective solution.

·         Ease of installation.

·         No mechanical anchors or metal components. Installed by compressing the seal into place.

·         Flat top surface.

·         Non-serrated top provides a smooth riding surface.

·         Neoprene  rubber.

• Strip Seal Expansion Joint system consists of an elastomeric gland mechanically locked between two steel edge members providing a superior watertight sealing system.The planned operative movement range of the Strip Seal Expansion Joint is from 0-80 mm. Movements more than 80 mm can be accommodated by using a series of 80 mm openings ( see modular ). TechStar’s Strip Seal Expansion Joint System is generally designed, manufactured and tested in accordance with AASHTO LRFD. 
• The Strip Seal system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic.COMPRESSION SEAL JOINT: is used for smaller range movements from 0 to 40mm. It consist of two angles with an elastomeric seal. The seal is installed in compressed position This Joint is ideal for replacement of old joint and for new project. Strip Seal Expansion Joint : Strip Seal Expansion Joint is used for medium movement from 0 to 80mm,
• The SANDHYAFLEX Compression Seal Expansion Joint System is used for small movement expansion joints, in deck of parkings, precasted structures and other types of concrete structures. The seal is compressed into place, providing a relatively flat profile surface that reduces tripping hazards and the collection of debris in the joint. Yes!

• Strip Seal Expansion Joint system consists of an elastomeric gland mechanically locked between two steel edge members providing a superior watertight sealing system.The planned operative movement range of the Strip Seal Expansion Joint is from 0-80 mm. Movements more than 80 mm can be accommodated by using a series of 80 mm openings ( see modular ). TechStar’s Strip Seal Expansion Joint System is generally designed, manufactured and tested in accordance with AASHTO LRFD. 
• The Strip Seal system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic.COMPRESSION SEAL JOINT: is used for smaller range movements from 0 to 40mm. It consist of two angles with an elastomeric seal. The seal is installed in compressed position This Joint is ideal for replacement of old joint and for new project. Strip Seal Expansion Joint : Strip Seal Expansion Joint is used for medium movement from 0 to 80mm,
• The SANDHYAFLEX Compression Seal Expansion Joint System is used for small movement expansion joints, in deck of parkings, precasted structures and other types of concrete structures. The seal is compressed into place, providing a relatively flat profile surface that reduces tripping hazards and the collection of debris in the joint. Yes!

• Strip Seal Expansion Joint system consists of an elastomeric gland mechanically locked between two steel edge members providing a superior watertight sealing system.The planned operative movement range of the Strip Seal Expansion Joint is from 0-80 mm. Movements more than 80 mm can be accommodated by using a series of 80 mm openings ( see modular ). TechStar’s Strip Seal Expansion Joint System is generally designed, manufactured and tested in accordance with AASHTO LRFD. 
• The Strip Seal system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic.COMPRESSION SEAL JOINT: is used for smaller range movements from 0 to 40mm. It consist of two angles with an elastomeric seal. The seal is installed in compressed position This Joint is ideal for replacement of old joint and for new project. Strip Seal Expansion Joint : Strip Seal Expansion Joint is used for medium movement from 0 to 80mm,
• The SANDHYAFLEX Compression Seal Expansion Joint System is used for small movement expansion joints, in deck of parkings, precasted structures and other types of concrete structures. The seal is compressed into place, providing a relatively flat profile surface that reduces tripping hazards and the collection of debris in the joint. Yes!

 Sandhya Enterpriese is an ever propelling company, chiefly expert in the design and manufacture of a wide range of Sandhyaflex D Type Rubber Fender Molded and Extruded products. We are rapidly expanding, keeping pace with the latest Engineering Technologies and possess state-of-the-art manufacturing infrastructure. We have crossed barriers that today have raised us to pioneering heights. Sandhyaflex has the experience and resources required to provide customers with the highest quality service that they deserve. Our aim is constant innovation to improve our service to the industry utilizing the latest engineering technology in combination with our modernized factory facilities.
BUSINESS POLICY

SANDHYA ENTERPRISES                                     AN ISO:9001:2015 Certified Company

Inquiry

Quotation

Purchase Order

1.      Billing Address.                            2. Delivery Address                         3. GST No                                4. Contact No

                                     Performa Invoice

Advance Payment

Take in Production as per Purchase Order

After Completed Consignment Inform to Client for Balance Payment

Dispatch the Material

Provide LR Copy