Cementing Rubber Hose

We are a manufacturer and supplier of Cement Feeding Rubber Suction Hose.We are a manufacturer and supplier of Water And Air Braided Hose. Sandhya Enterprises manufacturer,Supplier and Exporter Rubber Hose.size:1)3"ID x5Mtr (LG0 with both End MS Flange.
2)4"ID x5Mtr (LG0 with both End MS Flange.
3)5"ID x5Mtr (LG0 with both End MS Flange.
4)6"ID x5Mtr (LG0 with both End MS Flange.
5)8"ID x5Mtr (LG0 with both End MS Flange.
6)10"ID x5Mtr (LG0 with both End MS Flange.
7)12"ID x5Mtr (LG0 with both End MS Flange.
8)14"ID x5Mtr (LG0 with both End MS Flange.
9)16"ID x5Mtr (LG0 with both End MS Flange.

Cement Hose Application:Cement Fedding Rubber Hose for spraying of cement grout at irrigation projects, buildings, sites, dams, bridges and road in hilly terrains.

Construction:

Lining : Uniform seamless and extra thick tube of natural/synthetic/blend rubber compound of excellent abrasion resistance and free from air blisters, porosity and other defects.

Reinforcement :Plies of rubber impregnated woven textiles or braided high strength natural/synthetic yarns.

Cover : Suitable rubber compound with cloth marked finish, resistant to abrasion and weather.

Working Pressure:10 Bar (10Kg/cm2)

Proof Pressure:1.5 times of W.P.

Bursting Pressure: 2 times of W.P.

Reinforcement: 3 times of W.P.

End Connection: Built –in- Flange Type

Maxim length: 5 Mtr Maximum

Application: Suction & Discharge of Sand and Gravel, Mud Slurry, Concrete Slurry

/Mining Particles etc.

Bore: Smooth Bore

Bending Radius:10xInner Diameter of Hose 

Vacuum: Minimum700mmHg (0.9Bar)

Lining  material: NR/SBR Resistant to the passage of Abrasive and Corrosive Products

Hardness-50 to 60 Shore A.

Carcass: Synthetic Textile Plies with Embedded Steel Helix

Coating Material: Resistance to Severe and Bad Weather

Temperature: @1 Deg C to 100 Deg C

Working Pressure:10 Bar (10Kg/cm2)

Proof Pressure:1.5 times of W.P.

Bursting Pressure: 2 times of W.P.

Reinforcement: 3 times of W.P.

End Connection: Built –in- Flange Type

Maxim length: 5 Mtr Maximum

Application: Suction & Discharge of Sand and Gravel, Mud Slurry, Concrete Slurry

/Mining Particles etc.

Bore: Smooth Bore

Bending Radius:10xInner Diameter of Hose 

Vacuum: Minimum700mmHg (0.9Bar)

Lining  material: NR/SBR Resistant to the passage of Abrasive and Corrosive Products

Hardness-50 to 60 Shore A.

Carcass: Synthetic Textile Plies with Embedded Steel Helix

Coating Material: Resistance to Severe and Bad Weather

Temperature: @1 Deg C to 100 Deg C

BUSINESS POLICY

Inquiry

Quotation

Purchase Order

1.      Billing Address.                            2. Delivery Address                         3. GST No                                4. Contact No

                                     Performa Invoice

Advance Payment

Take in Production as per Purchase Order

After Completed Consignment Inform to Client for Balance Payment

Dispatch the Material

Provide LR Copy

Construction:

Lining : Uniform seamless and extra thick tube of natural/synthetic/blend rubber compound of excellent abrasion resistance and free from air blisters, porosity and other defects.

Reinforcement :Plies of rubber impregnated woven textiles or braided high strength natural/synthetic yarns.

Cover : Suitable rubber compound with cloth marked finish, resistant to abrasion and weather.

Electrical Bonding: A strand of copper wire is embedded between the reinforcement plies to provide electrical continuity throughout the length of the hose.

W.P. :Working Pressure, P.P. : Proof Pressure, B.P. : Burst Pressure, 1MPa : 10.2Kgf/Cm2 1Kgf/Cm2 :100KN/m2

Length : Mandrel made hose upto 15 mtr                                                  We are a manufacturer and supplier of Flange Cement Hose.

Cement Hose Application:Cement Fedding Rubber Hose for spraying of cement grout at irrigation projects, buildings, sites, dams, bridges and road in hilly terrains.

Construction:

Lining : Uniform seamless and extra thick tube of natural/synthetic/blend rubber compound of excellent abrasion resistance and free from air blisters, porosity and other defects.

Reinforcement :Plies of rubber impregnated woven textiles or braided high strength natural/synthetic yarns.

Cover : Suitable rubber compound with cloth marked finish, resistant to abrasion and weather.

Electrical Bonding: A strand of copper wire is embedded between the reinforcement plies to provide electrical continuity throughout the length of the hose.

 End Fittings like Molded Welded / Clamped Flanges as per Class ASA150, BS 10 Table D/E in MS or SS304 material or Camlock Couplings and any other customized end connections duly fitted with hose pipe also supplied.

**** Working Pressure 10 bar rating and till 6” NB sizes also produced.

We are a manufacturer and supplier of Cement Air Conveying Rubber Hose.

As Air and Water Yarn Braided Hose we are started in 2010, we laid out our goals for the sed future in our Strategy 2015, including our vision and mission for our company. Our vision emphasizes that the we want to be The Best Finance Company through the world this is goes beyond the simple fact that, as soon global company,

Our vision emphasizes that the we want to be The Best Finance Company through the world this is goes beyond the simple fact that, as soon global company.Perspiciatis unde omnis iste natus error sit elites voluptatem accu santiumuo doloremque laudatium, totam rem aperiam, eaque ipsa quae ab illomas ilts inventore veritatis et quasi architecto

Mister we could use a man like Herbert Hoover again. Maybe you and me were never meant to be. But baby think of me once in awhile. I'm at WKRP in Cincinnati! Just two good ol' boys Wouldn't change if they could system like a true modern.

wire used as heavy duty abrasion resistant suction hose for cement discharge fly ash dry bulk unloading in coal fired thermal power plants, cement making factories for abrasive material handling ash disposal application supplied as per SANDHYAFLEX’s standards produced by SANDHYAFEX Manufacturer, Supplier and  exporters of Cement Feeding Rubber Hose  to Malesiya, USA,

* Roll Lengths manufactured are 3 meters Min. (= 10 feet Approx.) and Max Length 15 meters produced in each size of Mandrel built woven ply hoses.

** Packaging in coils wrapped in HDPE  straight stuffed from factory into direct truck/ trailer.

*** End Fittings like Molded Welded / Clamped Flanges as per Class ASA150, BS 10 Table D/E in MS or SS304 material or Camlock Couplings and any other customized end connections duly fitted with hose pipe also supplied.

**** Working Pressure 10 bar rating and till 6” NB sizes also produced.

Cement Feeding Rubber Hose as per  IS:5137:1990  Specification

Cement Hose Application:Cement Fedding Rubber Hose for spraying of cement grout at irrigation projects, buildings, sites, dams, bridges and road in hilly terrains.

Construction:

Lining : Uniform seamless and extra thick tube of natural/synthetic/blend rubber compound of excellent abrasion resistance and free from air blisters, porosity and other defects.

Reinforcement :Plies of rubber impregnated woven textiles or braided high strength natural/synthetic yarns.

Cover : Suitable rubber compound with cloth marked finish, resistant to abrasion and weather.

Electrical Bonding: A strand of copper wire is embedded between the reinforcement plies to provide electrical continuity throughout the length of the hose.

Cement Feeding Rubber Hose pipe manufactured in blended RMA Gum and synthetic SBR rubber tube reinforced with high tensile multiple plies of synthetic cord fabric with a helical steel wire used as heavy duty abrasion resistant suction hose for cement discharge fly ash dry bulk unloading in coal fired thermal power plants, cement making factories for abrasive material handling ash disposal application supplied as per SANDHYAFLEX’s standards produced by SANDHYAFEX Manufacturer, Supplier and  exporters of Cement Feeding Rubber Hose  to Malesiya, USA,

Length : Mandrel made hose upto 15 mtr.,

Enriched industrial information and expertise, our organization is tremendously engrossed in offering Concrete Pump End Rubber Hose. We provide this pump end hose by testing it properly on quality provisions. Our pump end hose is designed as per the set quality standards by our professionals using optimum quality material. Customers can avail this pump end hose from us at nominal rates.

Features:

· Abrasion resistance

· Heat resistance

· Easy installation

Application 

Steel Cord Hose is used for placement of Concrete at construction sites & casting locations, also used at the end of the pumps to distribute & transport the concrete & for piling. This hose resists suctioning during cleaning process. Used with Hardened couplings.

Working Pressure:10 Bar (10Kg/cm2)

Proof Pressure:1.5 times of W.P.

Bursting Pressure: 2 times of W.P.

Reinforcement: 3 times of W.P.

End Connection: Built –in- Flange Type

Maxim length: 5 Mtr Maximum

Application: Suction & Discharge of Sand and Gravel, Mud Slurry, Concrete Slurry

/Mining Particles etc.

Bore: Smooth Bore

Bending Radius:10xInner Diameter of Hose 

Vacuum: Minimum700mmHg (0.9Bar)

Lining  material: NR/SBR Resistant to the passage of Abrasive and Corrosive Products

Hardness-50 to 60 Shore A.

Carcass: Synthetic Textile Plies with Embedded Steel Helix

Coating Material: Resistance to Severe and Bad Weather

Temperature: @1 Deg C to 100 Deg CConstruction                                         

We are offering a wide range of Cement Industries Air Conveying Rubber Hose.

As Air and Water Yarn Braided Hose we are started in 2010, we laid out our goals for the sed future in our Strategy 2015, including our vision and mission for our company. Our vision emphasizes that the we want to be The Best Finance Company through the world this is goes beyond the simple fact that, as soon global company,

Our vision emphasizes that the we want to be The Best Finance Company through the world this is goes beyond the simple fact that, as soon global company.

Mister we could use a man like Herbert Hoover again. Maybe you and me were never meant to be. But baby think of me once in awhile. I'm at WKRP in Cincinnati! Just two good ol' boys Wouldn't change if they could system like a true modern.

Why are US

Construction:

Lining : Uniform seamless and extra thick tube of natural/synthetic/blend rubber compound of excellent abrasion resistance and free from air blisters, porosity and other defects.

Reinforcement :Plies of rubber impregnated woven textiles or braided high strength natural/synthetic yarns.

Cover : Suitable rubber compound with cloth marked finish, resistant to abrasion and weather.

Electrical Bonding: A strand of copper wire is embedded between the reinforcement plies to provide electrical continuity throughout the length of the hose.

Length : Mandrel made hose upto 15 mtr.,
Thanks for Visit to Sandhya Enterprises Hyderabad Telangana India

* Roll Lengths manufactured are 3 meters Min. (= 10 feet Approx.) and Max Length 15 meters produced in each size of Mandrel built woven ply hoses.

** Packaging in coils wrapped in HDPE  straight stuffed from factory into direct truck/ trailer.

*** End Fittings like Molded Welded / Clamped Flanges as per Class ASA150, BS 10 Table D/E in MS or SS304 material or Camlock Couplings and any other customized end connections duly fitted with hose pipe also supplied.

* Roll Lengths manufactured are 3 meters Min. (= 10 feet Approx.) and Max Length 15 meters produced in each size of Mandrel built woven ply hoses.

** Packaging in coils wrapped in HDPE  straight stuffed from factory into direct truck/ trailer.

*** End Fittings like Molded Welded / Clamped Flanges as per Class ASA150, BS 10 Table D/E in MS or SS304 material or Camlock Couplings and any other customized end connections duly fitted with hose pipe also supplied.

**** Working Pressure 10 bar rating and till 6” NB sizes also produced.

MS Flange Dimension of Class 150 Flanges As per ANSIB 16.5