Sandhya Enterprises

With our rich industry experience and knowledge, we are engaged in offering high quality Fly Ash Rubber Hose. This is recommended for upper, lower, by-pass, heater and other applications. They are designed to perform as good as they look using the highest quality materials and engineered for optimum fit and function. Our provided Fly Ash Rubber Hose is widely used in the various industries such as agriculture, construction, mining and many other engineering industries. Clients can avail these hoses in various sizes as per their requirement.

Provided Fly Ash Rubber Hoses are the heavy duty yet flexible hoses, applicable for material handling purpose. These are found suitable for discharge of dry cement, sand, lime, mud particles, ash & cement plants for suction. These can capably replace the iron pipes which were the earlier utilization for transferring of abrasive materials, where there is a requirement of inherit flexible hoses. The tubes of these are made with black synthetic EPDM rubber, which are resistant to abrasion & heat. The lining of these Fly Ash Rubber Hoses are assembled with unvarying seamless tube of natural as well as synthetic blend rubber compounds, provided with optimal resistance to abrasion.

Construction                                         

Additional Information:

• Item Code: 300NB-FARH-SANDHYAFLEX
• Production Capacity: 12
• Delivery Time: 12 to 25 Days
• Packaging Details: Roll Lengths manufactured are 3 meters Min. (= 10 feet Approx.) and Max Length 15 meters produced in each size of Mandrel built woven ply hoses. ** Packaging in coils wrapped in HDPE straight stuffed from factory into direct truck/ trailer.

Additional Information:

• Item Code: 40094100
• Delivery Time: 10 to 15 days
• Packaging Details: I don't have access to real-time information or specific details about the production capacity, delivery time, or packaging details for specific products or companies, as my knowledge is limited to information available up until September 2021. To get this information for a specific product like a "Fly Ash Rubber Hose," you would need to contact the manufacturer or supplier directly. They can provide you with the most up-to-date information regarding their production capacity, delivery times, and packaging details. Be sure to inquire with the manufacturer or supplier for accurate and current information for your specific requirements.

• Sandhya Enterprises AN ISO:9001;2015 Certified Company is manufacture and Supplier of Bulker Unloading Cement Fly Ash Rubber Hose as per IS:5137:990 Specification: Size:3" ID to 6" ID End Fitting: MS Flange as per ASA 150 # ANSI 16.5 Drilled and DIN Specification. Working Pressure -10 to 15kg/cm2 Color:Black Vaccum:500 to 700hg.
• • Rubber Sandhya Enterprises AN ISO:9001;2015 Certified Company is manufacture Supplier and Exporter of Bulker Cement Unloading Rubber Hose. size:1).3" ID x5Mtr ILG)with Both End MS Flange as per ASA#.
  • • Shock Proof Yes Material Rubber We are offering a wide range ofSilo Bulker Loading and Unloading Fly Ash Rubber Hose 125mmID. Sandhya Enterprises AN ISO:9001: 2015 Ceritified Company. Run by Mr Mithilesh Chaudahry having 20 years Experince in Rubber Hose Industries. Bank Details COMPANY NAME SANDHYA ENTERPRISES Bank HDFC Bank Ltd Branch.
    • • Sandhya Enterprises AN ISO:9001 2015 Certified Company manufacturer and Supplier of Fly Ash Rubber Hose For Bulker Cement Unloading.size:3" ID to 6" ID , Length 15.0Mtr max. Working Pressure 10Bar to 20Bar. Color Black. Top Plain and Corruagted.
      • size:
      • 3"IDx 5Mtr 
      • 4" IDx 5Mtr 
      • 5" ID x 5mtr

Additional Information:

• Production Capacity: 100 Mtr
• Delivery Time: 7 to 15 days
• Packaging Details: The packaging type of fly ash rubber hoses can vary depending on the manufacturer, the length of the hose, and the specific requirements of the customer. Fly ash rubber hoses are usually packaged to ensure safe transportation and storage while protecting them from potential damage. Here are some common packaging types for fly ash rubber hoses: 1. Coil Packing: For shorter hoses, they are often coiled into a circular shape and secured with straps or ties to maintain their form during transportation and storage. Coil packing is practical for hoses with smaller diameters and lengths. 2. Reel Packing: Longer hoses may be wound onto reels or spools for easy handling and storage. Reel packing keeps the hose neatly organized, preventing tangling and damage during transit. 3. Bundles: Multiple hoses of the same length and diameter may be bundled together and wrapped with plastic or other protective materials to keep them together during shipping. 4. Individual Packaging: In some cases, individual fly ash rubber hoses might be packed separately in plastic bags or wrapped with protective materials to prevent damage during transit. 5. Labeling: Manufacturers often label the packaging with relevant information such as the hose size, length, pressure rating, temperature rating, and any other necessary specifications. 6. Bulk Shipping: For larger quantities of hoses, they might be shipped in bulk containers or on pallets for ease of handling and transport. The specific packaging type used by a manufacturer may depend on the hose's length, diameter, and customer requirements. Proper packaging ensures that the hoses reach their destination in good condition, ready for use. Additionally, packaging also helps with inventory management and storage at warehouses or distribution centers. When purchasing fly ash rubber hoses, it's essential to discuss packaging preferences with the manufacturer or supplier. They can provide you with options that suit your needs and ensure the saf

Additional Information:

• Production Capacity: 6
• Delivery Time: 7 days

Additional Information:

• Production Capacity: 200Mtr/day
• Delivery Time: 7 days

Additional Information:

• Production Capacity: 200mtr/day
• Delivery Time: 7 days

1. Pressure Ratings:

2. • Working Pressure: Typically in the range of 8 to 15 bar (115 to 220 PSI), depending on hose construction.
   • Burst Pressure: Typically ranges from 24 to 45 bar (350 to 650 PSI), providing a safety margin for high-pressure applications.

3. Temperature Range:

   • Suitable for temperatures ranging from -30°C to +80°C (-22°F to +176°F), allowing the hose to perform effectively in most industrial environments.

• Fluid Handling:

  • Commonly used in high-flow systems, this hose is ideal for transferring hydraulic fluids, fuel, water, oil, or chemicals. It's typically used in systems such as oil rigs, chemical processing plants, and fluid transfer pipelines.

• Air Transfer:

  • This hose is also well-suited for compressed air systems, used in applications that require high-pressure air for pneumatic tools, equipment, and machinery.

• Heavy-Duty Industrial Use:

  • This hose can be used in construction, agriculture, manufacturing, and mining operations, where fluid or air needs to be moved under high-pressure or in harsh environments.

1. Secure BSP Threaded Connections:

   • The BSP threaded nipples at both ends provide a secure, leak-proof connection, ensuring safe transfer of fluids or gases in high-pressure systems.

2. High-Pressure Resistance:

   • The hose is reinforced with layers of synthetic fabric or steel wire, making it capable of withstanding high pressures, which makes it perfect for industrial applications that demand both pressure resistance and durability.

3. Durability:

   • Designed with a tough outer rubber cover, this hose resists abrasion, ozone, UV exposure, and weathering, making it ideal for outdoor and industrial environments.

4. Flexibility:

   • Despite its strength, the hose remains flexible, allowing it to be easily routed and maneuvered into place without losing its resistance to pressure.

5. Versatile:

   • This hose can handle a wide variety of fluids, including oils, water, fuels, and chemicals, making it a versatile option for different industrial sectors such as automotive, construction, petrochemical, and manufacturing.

• Leak-Proof Connections: BSP threaded nipples ensure a tight, secure connection, minimizing the risk of leaks in high-pressure systems.
• High Flow Capacity: The 6-inch ID provides an excellent flow capacity, making it suitable for systems that need to transfer large volumes of air or fluid.
• Durable Construction: The hose is engineered to endure harsh environments and high pressures, ensuring long service life and minimal maintenance.
• Flexibility and Maneuverability: Despite its size, the hose remains flexible, allowing for easy installation in tight spaces or complex layouts.
• Cost-Effective: Due to its durability and long lifespan, this hose can reduce the need for frequent replacements, providing a cost-effective solution for high-capacity fluid and air transfer.

Additional Information:

• Item Code: sndhyaflex
• Production Capacity: 2000mts
• Delivery Time: depends
• Packaging Details: Could you clarify what you're asking about the "number of layers"? Are you referring to layers in a neural network, a physical structure, or something else entirely? Let me know, and I'll be happy to assist!

A 3-inch ID Fly Ash Rubber Hose is designed for the safe and efficient transfer of fly ash and other abrasive dry bulk materials in pneumatic conveying systems or other material handling applications. Fly ash, which is often used in construction and other industrial applications, requires specialized hoses that can withstand its abrasive nature while handling high-pressure conditions.

1. Dimensions:

   • Inner Diameter (ID): 3 inches (76.2 mm).
   • Outer Diameter (OD): Typically around 3.5 to 4 inches, depending on the rubber thickness and reinforcement.
   • Length: Available in standard lengths of 3 meters to 20 meters, but custom lengths are available based on specific project needs.

2. Material:

   • Inner Lining: Abrasion-resistant synthetic rubber, specially formulated to handle the abrasiveness of fly ash and other dry materials.
   • Reinforcement: Multiple layers of high-tensile synthetic fabric or steel wire, providing strength and flexibility for high-pressure use.
   • Outer Cover: Made from weather, ozone, and abrasion-resistant rubber, protecting the hose from UV rays, weather conditions, and mechanical wear.

3. Pressure Ratings:

   • Working Pressure: Typically 7 to 10 bar (100 to 150 PSI).
   • Burst Pressure: Usually around 21 to 30 bar (300 to 435 PSI), offering safety under pressure.

4. Temperature Range:

   • Operating temperatures generally range from -30°C to +80°C (-22°F to +176°F).

• Fly Ash Handling:

  • Used in pneumatic conveying systems to transport fly ash from one location to another in power plants, cement plants, and other industrial settings.
  • Ideal for transferring fly ash in cement manufacturing, ready-mix concrete plants, and waste-to-energy facilities.

• Other Abrasive Materials:

  • Suitable for transporting other dry, abrasive materials like sand, lime, powdered chemicals, or cement in industrial processes.

1. Abrasion Resistance:

   • The inner layer is specifically designed to resist the wear and tear caused by abrasive materials like fly ash, ensuring a long service life.

2. High Flexibility:

   • The hose is flexible enough for easy handling, installation, and routing in tight spaces without compromising its strength.

3. Pressure Resistance:

   • Reinforced construction ensures the hose can safely withstand high-pressure pneumatic conveying systems used to transfer fly ash.

4. Durability:

   • The outer cover is resistant to UV exposure, weathering, and ozone, allowing the hose to be used outdoors and in harsh environments.

5. Cost-Effective:

   • Provides a reliable and long-lasting solution for transferring abrasive materials, reducing the need for frequent hose replacements and downtime.

• Camlock Fittings: For quick and secure connection/disconnection, making the hose easy to use in various systems.
• Flanged Ends: For more permanent and robust connections, especially in high-pressure or high-volume applications.
• Heavy-Duty Clamps: To ensure the hose stays securely attached during use, preventing leaks or accidental disconnections.

Additional Information:

• Production Capacity: 200 Mtr
• Delivery Time: 7 to 15 days
• Packaging Details: packing in coil

A 6-inch ID Fly Ash Rubber Hose is designed for high-capacity, heavy-duty material transfer, primarily used for the transport of fly ash and other abrasive bulk materials in pneumatic conveying systems and industrial material handling setups. This hose can handle larger volumes of fly ash efficiently, making it suitable for large-scale operations in power plants, cement factories, and other industries.

1. Dimensions:

   • Inner Diameter (ID): 6 inches (152.4 mm).
   • Outer Diameter (OD): Typically 6.5 to 7 inches, depending on the thickness of the rubber lining and reinforcement layers.
   • Length: Available in standard lengths of 3 meters to 20 meters, with custom lengths available upon request.

2. Material:

   • Inner Lining: Abrasion-resistant synthetic rubber designed specifically for handling the rough, abrasive nature of fly ash and other dry bulk materials.
   • Reinforcement: Multiple layers of high-tensile synthetic fabric or steel wire reinforcements, ensuring the hose maintains high pressure and strength, while also providing flexibility.
   • Outer Cover: Made from weather, ozone, and abrasion-resistant rubber that provides protection against environmental wear, UV rays, and harsh conditions.

3. Pressure Ratings:

   • Working Pressure: Typically 8 to 12 bar (115 to 175 PSI), depending on hose construction and application requirements.
   • Burst Pressure: Around 24 to 36 bar (350 to 525 PSI), providing ample safety margins.

4. Temperature Range:

   • Typically suitable for operating temperatures from -30°C to +80°C (-22°F to +176°F), making it adaptable to most industrial environments.

• Fly Ash Conveying:

  • Ideal for use in pneumatic conveying systems that transport fly ash from power plants, incinerators, or other sources to silos, storage units, or processing stations.
  • Commonly used in cement manufacturing, ready-mix concrete production, and waste-to-energy plants where fly ash is a byproduct of the combustion process.

• Other Abrasive Bulk Materials:

  • Can also be used to transfer other dry, abrasive materials like sand, lime, powdered chemicals, or cement in industrial settings, where abrasion resistance is crucial.

1. Superior Abrasion Resistance:

   • The hose’s rubber inner lining is specially formulated to handle abrasive materials like fly ash, significantly reducing the wear and extending the hose’s service life.

2. High Pressure Resistance:

   • Reinforced with high-tensile fabric or steel wire, this hose can handle the high-pressure demands of pneumatic conveying systems, where the material must be moved efficiently over long distances.

3. Durability in Harsh Environments:

   • The outer rubber cover is resistant to ozone, UV rays, weather conditions, and abrasion, ensuring that the hose remains functional and durable even in challenging outdoor environments.

4. Increased Flow Capacity:

   • With a 6-inch diameter, this hose can carry a larger volume of material per minute compared to smaller diameter hoses, making it ideal for higher-capacity systems.

5.  

6.  

Additional Information:

• Item Code: nhgfdcvbhjnkhgf
• Production Capacity: 100
• Delivery Time: dependds
• Packaging Details: https://youtu.be/TwusXWnHf30?si=X5OJtO_Haja4Nsr-https://youtu.be/TwusXWnHf30?si=X5OJtO_Haja4Nsr-https://youtu.be/TwusXWnHf30?si=X5OJtO_Haja4Nsr-

A 4-inch ID Rubber Hose with BSP Threaded Nipple is a heavy-duty industrial hose designed for high-pressure fluid and air transfer, equipped with British Standard Pipe (BSP) threaded nipples at both ends. The BSP threads allow for secure, leak-proof connections to fittings, valves, or flanges, making it suitable for use in various pneumatic, hydraulic, and fluid-handling systems.

1. Dimensions:

   • Inner Diameter (ID): 4 inches (101.6 mm).
   • Outer Diameter (OD): Typically between 4.5 to 5 inches, depending on the thickness of the rubber lining and reinforcement.
   • Length: Common lengths include 3 meters to 20 meters, but can be customized depending on project requirements.

2. Material:

   • Inner Lining: Made from abrasion-resistant synthetic rubber designed to handle high-pressure fluid and air transfer applications.
   • Reinforcement: Usually reinforced with high-tensile fabric or steel wire layers, which enhance pressure resistance, durability, and flexibility.
   • Outer Cover: The outer cover is made from weather, ozone, and abrasion-resistant rubber that protects the hose from environmental wear and mechanical damage.

3. End Fittings:

   • Both Ends: Equipped with BSP threaded nipples to allow for easy and secure connection to BSP-threaded fittings, such as valves, couplings, and flanges.
   • Thread Sizes: BSP threaded nipples are available in sizes that match the hose ID (in this case, 4-inch BSP threads), ensuring a secure, leak-proof connection.

4. Pressure Ratings:

   • Working Pressure: Typically 7 to 12 bar (100 to 175 PSI), depending on the construction and reinforcement of the hose.
   • Burst Pressure: Usually around 21 to 36 bar (300 to 525 PSI), ensuring the hose can safely handle high-pressure applications.

5. Temperature Range:

   • The hose operates efficiently in temperatures ranging from -30°C to +80°C (-22°F to +176°F), making it suitable for most industrial environments.

• Fluid Handling:

  • Commonly used in hydraulic systems, fuel transfer, water supply lines, oil lines, and other fluid handling applications where secure connections and high pressure are required.

• Compressed Air Systems:

  • Perfect for compressed air applications in industries like manufacturing, construction, and maintenance, where air tools and pneumatic equipment are used.

• General Industrial Use:

  • The hose can be used in chemical transfer, material handling, or irrigation systems, where flexible, durable hose connections are necessary for efficient operation.

1. BSP Threaded Connections:

   • BSP threaded nipples ensure a secure and leak-proof connection, which is essential for applications with pressurized fluid or air. The threads allow for quick and reliable connection to BSP-compatible fittings.

2. Durability:

   • With its reinforced construction and abrasion-resistant inner and outer rubber layers, the hose is built to last, even under high-pressure and harsh environmental conditions.

Rubber hoses without flanges are commonly used in various industries for their flexibility and ease of installation. These hoses are typically equipped with alternative end fittings, such as:

• Camlock Fittings: Quick-connect couplings that allow for rapid attachment and detachment.

• Threaded Fittings: Standardized screw-type connections compatible with various equipment.

• Barbed Fittings: Designed to fit snugly into the hose, secured with clamps for a tight seal.

These fittings provide secure connections without the need for flanges, making them suitable for applications where space is limited or where quick disconnection is necessary.

Applications:

• Fluid Transfer: Transporting liquids in agricultural, industrial, and residential settings.

• Air Lines: Supplying compressed air in pneumatic systems.

• Chemical Handling: Safely conveying various chemicals in processing plants.

• Food and Beverage: Sanitary hoses for transferring consumable products.

When selecting a rubber hose without flanges, consider factors such as the type of material being conveyed, pressure and temperature requirements, and compatibility with existing equipment. Consulting with a reputable hose supplier can help ensure you choose the appropriate hose and fittings for your specific application.

Additional Information:

• Item Code: 100NBRH
• Production Capacity: 200mtr/Day
• Delivery Time: 7 days

Sandhyaflex Mud Rubber Hose is a heavy-duty industrial hose designed for transporting abrasive materials such as mud, slurry, cement, and concrete. Manufactured by Sandhya Enterprises in Hyderabad, India, these hoses are engineered to withstand harsh conditions commonly found in construction, mining, and dredging operations.

• Material Composition: Constructed from a blend of natural and synthetic rubber compounds, providing excellent abrasion resistance and durability. citeturn0search0

• Reinforcement: Reinforced with high-quality synthetic textile cords and embedded with high-tensile steel helical wires (ranging from 10 WWG to 8 SWG) to enhance strength and flexibility. citeturn0search0

• Pressure Rating: Designed to handle working pressures between 10 to 25 kg/cm², with proof pressures up to 1.5 times the working pressure and peak pressures up to three times the working pressure. citeturn0search0

• Temperature Range: Suitable for temperatures ranging from -1°C to 100°C. citeturn0search0

• Size Options: Available in nominal sizes from 6" (150mm) to 10" (250mm) inner diameter, with lengths ranging from 5 meters to 15 meters, depending on the size. citeturn0search0

• End Fittings: Equipped with MS flanges as per ASA 150# ANSI 16.5 drilled and DIN specifications for secure connections. citeturn0search0

• Construction Sites: For transporting cement, plaster, and sand mixtures.

• Mining Operations: Handling slurry and mud materials.

• Dredging Projects: Used in dredge lines for transporting silt, sand, and mud.

• Chemical Plants: Suitable for handling corrosive slurries and liquids. citeturn0search5

• High Durability: Withstands abrasive and harsh conditions, ensuring a long service life.

• Flexible Design: Allows for easy handling and installation in various industrial setups.

• Corrosion Resistance: Resistant to chemicals and slurry abrasions, making it suitable for diverse industrial applications.

For more detailed information or to request a quote, 

Here’s a brief description for a Cock Injection Rubber Hose, typically used in construction and grouting:

✅ Product: Cock Injection Rubber Hose
✅ Type: Flexible rubber hose for injection applications
✅ Common Sizes:

• Inner Diameter (ID): usually 6 mm to 25 mm

• Length: typically supplied in 10 m / 20 m / custom cuts
  ✅ Material: High-grade natural rubber or synthetic rubber with textile reinforcement
  ✅ Color: Usually black (or sometimes with red/blue stripes for marking)
  ✅ Pressure Rating: Medium to high pressure (depending on design)
  ✅ Applications:

• Cement slurry / grout injection in civil construction

• Epoxy / chemical injection for crack filling

• Often connected to injection packers (cock packers) for concrete repair

If you want, I can also create for you:
✔ A detailed product datasheet (with specs like ID, OD, WP, BP)
✔ A quotation format for buyers
✔ Or a short website / catalog description

Just tell me what you’d like next!

Additional Information:

• Item Code: CIRH
• Production Capacity: 200Mtr/Days
• Delivery Time: 7 ot 15 days
• Packaging Details: Packing in Coil and Strength

* Roll Lengths manufactured are 3 meters Min. (= 10 feet Approx.) and Max Length 15 meters produced in each size of Mandrel built woven ply hos

Additional Information:

• Item Code: 80NB-ARH-SANDHYAFLEX
• Production Capacity: 100Mtr/days
• Delivery Time: 7 to 15 Days
• Packaging Details: Roll Lengths manufactured are 3 meters Min. (= 10 feet Approx.) and Max Length 15 meters produced in each size of Mandrel built woven ply hoses. ** Packaging in coils wrapped in HDPE straight stuffed from factory into direct truck/ trailer.

• Sandhya Enterprises AN ISO:9001;2015 Certified Company is manufacture and Supplier of Bulker Unloading Cement Fly Ash Rubber Hose as per IS:5137:990 Specification: Size:3" ID to 6" ID End Fitting: MS Flange as per ASA 150 # ANSI 16.5 Drilled and DIN Specification. Working Pressure -10 to 15kg/cm2 Color:Black Vaccum:500 to 700hg.
• • Rubber Sandhya Enterprises AN ISO:9001;2015 Certified Company is manufacture Supplier and Exporter of Bulker Cement Unloading Rubber Hose. size:1).3" ID x5Mtr ILG)with Both End MS Flange as per ASA#.
  • • Shock Proof Yes Material Rubber We are offering a wide range ofSilo Bulker Loading and Unloading Fly Ash Rubber Hose 125mmID. Sandhya Enterprises AN ISO:9001: 2015 Ceritified Company. Run by Mr Mithilesh Chaudahry having 20 years Experince in Rubber Hose Industries. Bank Details COMPANY NAME SANDHYA ENTERPRISES Bank HDFC Bank Ltd Branch.
    • • Sandhya Enterprises AN ISO:9001 2015 Certified Company manufacturer and Supplier of Fly Ash Rubber Hose For Bulker Cement Unloading.size:3" ID to 6" ID , Length 15.0Mtr max. Working Pressure 10Bar to 20Bar. Color Black. Top Plain and Corruagted.
      • size:
      • 3"IDx 5Mtr 
      • 4" IDx 5Mtr 
      • 5" ID x 5mtr

      • Here are the details of the Cement Feeding Rubber Hose, a specialized hose used in various industries for transporting cement and other dry bulk materials via pneumatic systems:

        Cement Feeding Rubber Hose 1. Product Overview

        • Product Name: Cement Feeding Rubber Hose

        • Material: High-quality synthetic rubber (commonly made from NR (Natural Rubber), SBR (Styrene-Butadiene Rubber), or NBR (Nitrile Rubber))

        • Purpose: Designed for the pneumatic conveying of dry cement and other bulk dry materials, typically in cement plants, construction sites, and industrial settings.

        • Applications: The hose is used in cement plants, concrete batching plants, construction sites, and other facilities where cement and dry bulk materials need to be transferred via air pressure systems.

        2. Features and Benefits

        • Abrasion Resistance: The hose is highly abrasion-resistant, designed to withstand the abrasive nature of cement and other dry materials.

        • Pressure and Vacuum Resistance: It is suitable for both high-pressure and vacuum conditions typically encountered in pneumatic conveying systems.

        • Flexibility: The hose remains flexible and easy to handle, even in tight spaces, despite its rugged design.

        • Temperature Resistance: Capable of handling a wide range of temperatures, making it suitable for both high temperature and standard operational conditions.

        • Chemical Resistance: Some versions of 

        • s to mixers or 

Additional Information:

• Item Code: SANDHYAFLEXCFRH
• Production Capacity: 200Mtr./Dauy
• Delivery Time: 7 to 15 days
• Packaging Details: Of course! Here's a typical **Packing Details** format for a **Cement Feeding Rubber Hose**, commonly used for pneumatic transfer of cement and other dry bulk materials: --- ### 📦 Packing Details for Cement Feeding Rubber Hose: - **Hose Size (Inner Diameter):** - Common sizes: 3", 4", 5", 6" (75mm, 100mm, 125mm, 150mm) - **Length per Hose:** - Standard lengths: 3 meters, 6 meters, 10 meters - Custom lengths available upon request - **Packing Method:** - **Wrapped individually** with **plastic stretch film** or **polyethylene sheet** to protect from moisture, dust, and sunlight. - **Ends of the hoses** are often **capped or sealed** with plastic caps to prevent contamination. - **Bundling**: One hose per bundle. - **Optional Heavy Packing**: Hoses can be placed in **woven sacks** or **wooden crates** if needed for heavy-duty protection during export. - **Number of Hoses per Bundle:** - 1 hose per bundle (due to the heavy nature of cement hoses) - **Strapping:** - Each hose bundle is **tightly strapped** with **nylon or polypropylene (PP) straps**. - **Marking/Labeling:** - Each hose is tagged or labeled with: - Size (I.D. × O.D.) - Length - Working Pressure rating (e.g., 10 Bar, 12 Bar) - Batch number - Manufacturer's name/logo - Production date - **Approximate Weight:** - Depends on diameter and wall thickness (e.g., 4" dia x 10-meter hose may weigh around 70–110 kg) - **Container Loading:** - **20ft container**: approx. 80–100 hoses (depends on size) - **40ft container**: approx. 160–200 hoses - **Special Notes:** - Hoses should be stored away from direct sunlight and chemicals. - Proper lifting tools are recommended for handling due to heavy weight. --- Would you like me to also give you a **sample visual** or **packing list template** for export shipping? 🚚📄 It could help if you're preparing a shipment or a quotation!

• Sandhya Enterprises AN ISO:9001;2015 Certified Company is manufacture and Supplier of Bulker Unloading Cement Fly Ash Rubber Hose as per IS:5137:990 Specification: Size:3" ID to 6" ID End Fitting: MS Flange as per ASA 150 # ANSI 16.5 Drilled and DIN Specification. Working Pressure -10 to 15kg/cm2 Color:Black Vaccum:500 to 700hg.
• • Rubber Sandhya Enterprises AN ISO:9001;2015 Certified Company is manufacture Supplier and Exporter of Bulker Cement Unloading Rubber Hose. size:1).3" ID x5Mtr ILG)with Both End MS Flange as per ASA#.
  • • Shock Proof Yes Material Rubber We are offering a wide range ofSilo Bulker Loading and Unloading Fly Ash Rubber Hose 125mmID. Sandhya Enterprises AN ISO:9001: 2015 Ceritified Company. Run by Mr Mithilesh Chaudahry having 20 years Experince in Rubber Hose Industries. Bank Details COMPANY NAME SANDHYA ENTERPRISES Bank HDFC Bank Ltd Branch.
    • • Sandhya Enterprises AN ISO:9001 2015 Certified Company manufacturer and Supplier of Fly Ash Rubber Hose For Bulker Cement Unloading.size:3" ID to 6" ID , Length 15.0Mtr max. Working Pressure 10Bar to 20Bar. Color Black. Top Plain and Corruagted.
      • size:
      • 3"IDx 5Mtr 
      • 4" IDx 5Mtr 
      • 5" ID x 5mt

Certainly! Below are the detailed specifications and features of the Cement Feeding Rubber Hose, which is typically used in the construction and mining industries to transport cement and other dry bulk materials. This hose is designed to handle the abrasive nature of cement and ensure efficient, safe delivery during construction projects.

• Product Name: Cement Feeding Rubber Hose

• Material: Rubber (typically synthetic rubber like NR (Natural Rubber), SBR (Styrene-Butadiene Rubber), EPDM (Ethylene Propylene Diene Monomer), or NBR (Nitrile Rubber))

• Purpose: Designed to transport dry cement, sand, or other similar dry bulk materials in construction, mining, and material handling applications.

• Applications: Commonly used in cement transfer, dry bulk material handling, pneumatic conveying systems, construction sites, and mining operations.

• Abrasion Resistance: Cement feeding hoses are made with high-quality abrasion-resistant rubber to withstand the harsh conditions when transferring cement and other granular materials.

• Hig

• here's anything else I can assist with!

• Sandhya Enterprises AN ISO:9001;2015 Certified Company is manufacture and Supplier of Bulker Unloading Cement Fly Ash Rubber Hose as per IS:5137:990 Specification: Size:3" ID to 6" ID End Fitting: MS Flange as per ASA 150 # ANSI 16.5 Drilled and DIN Specification. Working Pressure -10 to 15kg/cm2 Color:Black Vaccum:500 to 700hg.
• • Rubber Sandhya Enterprises AN ISO:9001;2015 Certified Company is manufacture Supplier and Exporter of Bulker Cement Unloading Rubber Hose. size:1).3" ID x5Mtr ILG)with Both End MS Flange as per ASA#.
  • • Shock Proof Yes Material Rubber We are offering a wide range ofSilo Bulker Loading and Unloading Fly Ash Rubber Hose 125mmID. Sandhya Enterprises AN ISO:9001: 2015 Ceritified Company. Run by Mr Mithilesh Chaudahry having 20 years Experince in Rubber Hose Industries. Bank Details COMPANY NAME SANDHYA ENTERPRISES Bank HDFC Bank Ltd Branch.
    • • Sandhya Enterprises AN ISO:9001 2015 Certified Company manufacturer and Supplier of Fly Ash Rubber Hose For Bulker Cement Unloading.size:3" ID to 6" ID , Length 15.0Mtr max. Working Pressure 10Bar to 20Bar. Color Black. Top Plain and Corruagted.
      • size:
      • 3"IDx 5Mtr 
      • 4" IDx 5Mtr 
      • 5" ID x 5mtr1. High Abrasion Resistance

        • Specially designed with abrasion-resistant rubber lining to withstand the harsh, gritty texture of dry cement and other bulk materials.

        • Extends the hose's service life even under heavy-duty use.

        ✅ 2. Flexibility and Bendability

        • More flexible than metal or rigid hoses, making it easier to maneuver around equipment or tight construction zones.

        ✅ 3. Vibration and Shock Absorption

        • Natural rubber body helps absorb vibration and shocks during material transfer, reducing wear on connected equipment and minimizing material spillage.

        ✅ 4. Lightweight and Easy to Handle

        • Compared to metal pipes, rubber hoses are lighter, making them easier to move, install, and replace.

        ✅ 5. Weather and Temperature Resistant

        • Built to perform under a wide range of temperatures and weather conditions, including exposure to sunlight, heat, or cold.

        ✅ 6. Leak-Proof and Safe

        • Properly clamped and fitted, these hoses provide a secure, leak-proof channel for cement transfer, which enhances worker safety and site cleanliness.

        ✅ 7. Anti-Static Properties

        • Some versions are made with anti-static or conductive rubber, preventing the buildup of static electricity—important when handling fine powders like cement.

        ✅ 8. Versatile Application

        • Suitable for cement silos, batching plants, pneumatic conveying systems, and other construction or industrial uses.

        ✅ 9. Easy Maintenance

        • Simple to clean, inspect, and replace as needed without requiring complex tools or equipment.

Additional Information:

• Item Code: SFCFRH
• Production Capacity: 200/Mtr
• Delivery Time: 7 to 15 days
• Packaging Details: Packing as per Dimension

1. High-Quality Rubber Construction: The hose is crafted from premium-grade rubber or synthetic elastomers, ensuring superior flexibility, resistance to abrasion, and durability. This robust construction is specifically designed to withstand the abrasive nature of cement and other materials commonly used in construction.

2. Reinforcement for Strength: To enhance its structural integrity, the hose is reinforced with layers of high-strength materials, such as textile or steel wire braids. This reinforcement provides additional strength, flexibility, and resistance to pressure, allowing the hose to withstand the demanding conditions of cement transfer.

3. Camlock Fittings for Quick Connections: Equipped with Camlock fittings, our rubber hose facilitates rapid and secure connections without the need for tools. The Camlock mechanism allows for swift engagement and disengagement, streamlining the setup and disassembly processes in cement transfer systems.

4. Abrasion-Resistant Design: The rubber hose is specifically designed to resist abrasion caused by the movement of abrasive materials like cement. This feature minimizes wear and tear, extending the service life of the hose and reducing the need for frequent replacements.

5. Smooth Interior Surface: The interior surface of the hose is engineered to be smooth, minimizing friction and allowing for efficient material flow. This design ensures a continuous and smooth transfer of cement, preventing clogging or blockages during the process.

6. Flexibility and Bend Radius: Despite its robust construction, the hose remains flexible, allowing for easy handling and maneuverability. The optimized bend radius ensures that the hose can navigate through tight spaces, providing flexibility in various industrial setups.

7. Pressure and Temperature Ratings: Our Cement Feeding Rubber Hose is designed to handle high-pressure requirements and varying temperatures commonly encountered in cement transfer applications. This ensures reliable performance in diverse operating conditions.

8. Resistance to Environmental Factors: The rubber material is engineered to resist degradation from exposure to environmental elements, UV radiation, and fluctuations in temperature. This resistance enhances the durability of the hose, ensuring consistent performance over time.

1. High-Quality Rubber Construction: The hose is crafted from premium-grade rubber or synthetic elastomers, ensuring superior flexibility, resistance to abrasion, and durability. This robust construction is specifically designed to withstand the abrasive nature of cement and other materials commonly used in construction.

2. Reinforcement for Strength: To enhance its structural integrity, the hose is reinforced with layers of high-strength materials, such as textile or steel wire braids. This reinforcement provides additional strength, flexibility, and resistance to pressure, allowing the hose to withstand the demanding conditions of cement transfer.

3. Camlock Fittings for Quick Connections: Equipped with Camlock fittings, our rubber hose facilitates rapid and secure connections without the need for tools. The Camlock mechanism allows for swift engagement and disengagement, streamlining the setup and disassembly processes in cement transfer systems.

4. Abrasion-Resistant Design: The rubber hose is specifically designed to resist abrasion caused by the movement of abrasive materials like cement. This feature minimizes wear and tear, extending the service life of the hose and reducing the need for frequent replacements.

5. Smooth Interior Surface: The interior surface of the hose is engineered to be smooth, minimizing friction and allowing for efficient material flow. This design ensures a continuous and smooth transfer of cement, preventing clogging or blockages during the process.

6. Flexibility and Bend Radius: Despite its robust construction, the hose remains flexible, allowing for easy handling and maneuverability. The optimized bend radius ensures that the hose can navigate through tight spaces, providing flexibility in various industrial setups.

7. Pressure and Temperature Ratings: Our Cement Feeding Rubber Hose is designed to handle high-pressure requirements and varying temperatures commonly encountered in cement transfer applications. This ensures reliable performance in diverse operating conditions.

8. Resistance to Environmental Factors: The rubber material is engineered to resist degradation from exposure to environmental elements, UV radiation, and fluctuations in temperature. This resistance enhances the durability of the hose, ensuring consistent performance over time.

Additional Information:

• Production Capacity: 200mtr /day
• Delivery Time: 7 days

A 6-inch ID rubber hose for Ready-Mix Concrete (RMC) industries is a robust, heavy-duty solution for transferring concrete, slurry, and other abrasive materials in construction and industrial settings. Below are the detailed specifications and features:

1. Material Composition:

   • Inner Tube: High-grade abrasion-resistant synthetic rubber to handle the wear caused by concrete and aggregates.
   • Reinforcement: Multiple layers of high-tensile synthetic fabric or steel wire to provide strength and resist high pressure.
   • Outer Cover: Weather, ozone, and abrasion-resistant synthetic rubber for extended durability in harsh environments.

2. Dimensions:

   • Inner Diameter (ID): 6 inches (152.4 mm).
   • Outer Diameter (OD): Approximately 6.7 to 7 inches, depending on reinforcement layers.

3. Pressure Ratings:

   • Working Pressure: Typically 600 PSI to 1,200 PSI.
   • Burst Pressure: Usually 3x the working pressure for a safety margin.

4. Temperature Range:

   • -30°C to +80°C (-22°F to +176°F), ensuring operation in varied climates.

5. Flexibility:

   • Designed for a balance of flexibility and structural integrity, making it easier to maneuver on construction sites.

• Concrete Pumping: Transports concrete from pumps to the desired placement area.
• Shotcrete Delivery: Used for tunnel linings, slope stabilization, and mining projects.
• Slurry and Grout Transfer: Handles abrasive mixtures like cement slurry and mortar.

• Abrasion Resistance: Ensures longer service life despite exposure to rough aggregates and slurry.
• Durability: Reinforcement layers allow the hose to endure high working pressures and heavy-duty use.
• Weatherproof: Resistant to environmental factors like UV rays, ozone, and rain, ensuring reliability outdoors.
• Smooth Inner Lining: Reduces friction for efficient material flow.

• Couplings: Compatible with Victaulic, Camlock, or other coupling systems for easy connections.
• Clamps: Heavy-duty clamps to ensure leak-proof and secure fittings.
• Custom Fittings: Flanged ends or other fittings can be tailored to specific pump systems.

1. Routine Inspections: Regularly check for abrasions, cracks, or any weak spots.
2. Cleaning: Flush with water after use to prevent clogging and concrete buildup.
3. Storage: Store in a dry, shaded location to protect the outer cover from wear and degradation.

• High capacity to handle large volumes of concrete and slurry.
• Robust construction for long-term use in demanding conditions.
• Customizable fittings for seamless integration with existing systems.

If you have specific needs, such as hose length, working environment, or pressure requirements, I can help narrow down suitable options or suppliers. Let me know!

Additional Information:

• Item Code: jhngbbhj
• Production Capacity: 100
• Delivery Time: depends
• Packaging Details: Sure! Could you clarify what kind of packaging details you're looking for? For example: - Product packaging (box dimensions, materials, etc.) - Shipping packaging (how products are packed for transport) - Design/labeling details - Regulatory info (like barcodes, warnings, etc.) - Industry-specific packaging (e.g., food, cosmetics, electronics) Let me know the context, and I’ll tailor the info for you! Let me know the context or specific product you're referring to, and I’ll tailor the info for you.Sure! Could you clarify what kind of **packaging details** you're looking for? For example: - Product packaging (materials, size, design) - Shipping packaging (box dimensions, protective elements) - Labeling requirements - Food/cosmetic/pharmaceutical packaging regulations - Eco-friendly packaging options Let me know the context or specific product you're referring to, and I’ll tailor the info for you.

A 5-inch ID Fly Ash Rubber Hose is designed for the efficient and safe transfer of fly ash and other abrasive dry materials, commonly used in pneumatic conveying systems or other bulk material handling setups. Fly ash is a byproduct of combustion in power plants and is highly abrasive, requiring specialized hoses that can handle the wear while maintaining high-pressure performance.

1. Dimensions:

   • Inner Diameter (ID): 5 inches (127 mm).
   • Outer Diameter (OD): Typically between 5.5 to 6 inches, depending on the thickness of the rubber layers and reinforcement.
   • Length: Typically available in 3 meters to 20 meters, but can be customized based on specific project needs.

2. Material:

   • Inner Lining: Abrasion-resistant synthetic rubber specifically engineered to handle the rough, abrasive texture of fly ash and other dry bulk materials.
   • Reinforcement: Multiple layers of high-tensile synthetic fabric or steel wire to provide the hose with the strength and flexibility necessary for high-pressure applications.
   • Outer Cover: Made from weather, ozone, and abrasion-resistant rubber, which provides protection against environmental conditions like UV rays, moisture, and physical damage.

3. Pressure Ratings:

   • Working Pressure: Typically ranges between 8 to 12 bar (115 to 175 PSI), depending on the hose's construction and reinforcement.
   • Burst Pressure: Typically 3 times the working pressure, ranging from 24 to 36 bar (350 to 525 PSI), ensuring safe operation under high pressure.

4. Temperature Range:

   • Typically between -30°C to +80°C (-22°F to +176°F), allowing the hose to perform well in a wide range of industrial environments.

• Fly Ash Conveying:

  • Used in pneumatic conveying systems to move fly ash from the combustion process (in power plants) to storage silos or processing units.
  • Ideal for cement manufacturing, ready-mix concrete production, and waste-to-energy plants where fly ash is a key byproduct.

• Other Dry Bulk Material Handling:

  • Suitable for transporting other abrasive dry bulk materials, including sand, cement, lime, or powdered chemicals, in industrial settings.

1. Abrasion Resistance:

   • The hose’s inner rubber lining is specifically formulated to withstand the abrasiveness of fly ash, preventing excessive wear and extending the service life of the hose.

2. High Flexibility:

   • Designed to be flexible enough to navigate tight spaces and complex setups, without compromising on strength and pressure resistance.

3. High Pressure Resistance:

   • Reinforced with synthetic fabrics or steel wires, the hose can endure high-pressure pneumatic conveying systems, making it ideal for bulk material transfer in industrial settings.

4. Durable Construction:

   • The outer cover is designed to withstand environmental wear, UV exposure, and ozone, ensuring the hose remains operational for long periods in harsh outdoor conditions.

5. Cost-Effective:

   • Due to its long lifespan and reliable performance, this hose offers a cost-effective solution for industrial bulk material handling, reducing downtime and maintenance costs.

1. BSP Threaded Nipples for Secure Connections:

   • The BSP threaded fittings ensure a tight and secure connection to other equipment, preventing leaks and reducing the chance of pressure loss in high-pressure systems.

2. High-Pressure Resistance:

   • Designed with reinforced synthetic fabric or steel wire, this hose can withstand high-pressure environments, making it suitable for demanding applications.

3. Durable Construction:

   • The hose is constructed to endure harsh conditions, offering abrasion, ozone, weather, and chemical resistance. The outer layer protects against physical wear, making it ideal for both indoor and outdoor use.

4. Flexibility and Ease of Installation:

   • Despite its strength and pressure rating, the hose remains flexible enough to bend and maneuver into place, making it easier to install in confined spaces or complex systems.

5. Versatility:

   • The hose is suitable for various industrial applications that require a reliable, high-capacity hose for fluid or air transfer, including hydraulic systems, fuel handling, chemical transfer, and more.

• Leak-Proof Connections: The BSP threaded nipples ensure a secure, leak-proof connection, minimizing the risk of spills or loss of pressurized air/fluid.
• High Capacity: The 5-inch ID provides excellent flow capacity, making it suitable for systems that require the transfer of larger volumes of fluid or air.
• Durability and Longevity: Designed for heavy-duty use, the hose is durable and resistant to wear, offering a long service life and reducing the need for frequent replacements.
• Flexibility and Versatility: The hose’s flexibility allows for easy installation in systems where space and movement are factors, while its durability ensures it performs reliably over time.
• Cost-Effective: Its long-lasting construction and high-pressure handling capacity make it a cost-effective solution for industries that rely on fluid or air transfer.

1. Regular Inspections:

   • Inspect the hose regularly for signs of wear, particularly around the threaded nipples and bend areas. Look for cracks, leaks, or any damage that could compromise performance.

2. Cleaning:

   • After each use, clean the hose thoroughly to remove any debris, oil, or fluid residues that could clog or damage the hose.

3. Proper Storage:

   • Store the hose in a dry, cool place away from direct sunlight and extreme temperatures. Ensure the hose is not subjected to mechanical stress when stored, which could cause deformation or damage.

This 5-inch ID Rubber Hose with BSP threaded nipples is often used in high-capacity, high-pressure systems in industries such as hydraulics, compressed air, fuel transfer, and chemical handling. It is particularly useful in industrial plants, construction sites, and mining operations where large volumes of air, fluids, or gases need to be transferred reliably and safely.

If you need more information on suppliers, customization options, or specific requirements for your application, feel free to ask!

The Cement Feeding Rubber Hose from Sandhyaflex is a specialized hose designed for transferring dry bulk materials such as cement, fly ash, and other abrasive substances under high pressure. These hoses are widely utilized in industries like construction, cement plants, and material handling due to their durability and efficiency.

1. Construction:

   • Inner Layer: Made from abrasion-resistant rubber, ensuring a long service life even with highly abrasive materials.
   • Reinforcement: High-tensile synthetic fabric or steel wire for added strength and pressure resistance.
   • Outer Layer: Weather- and abrasion-resistant rubber for protection against external wear and tear.

2. Key Specifications:

   • Size Range: Typically available in sizes ranging from 1 inch to 6 inches or more, depending on requirements.
   • Length Options: Customizable lengths to suit specific project needs.
   • Operating Pressure: Designed to handle high-pressure pneumatic applications, often in the range of 10 to 20 bar or more.
   • Temperature Resistance: Suitable for temperatures commonly encountered in material transfer applications.

3. Advantages:

   • High flexibility for ease of installation and operation.
   • Excellent abrasion resistance for handling abrasive materials like cement and fly ash.
   • Reinforced design ensures minimal risk of rupture under pressure.

4. Applications:

   • Cement feeding in construction sites and industrial plants.
   • Pneumatic conveying of dry bulk materials.
   • Handling fly ash, lime, and similar substances.

Additional Information:

• Item Code: BURH-SANDHYAFLEX
• Production Capacity: 100Mtr/days
• Delivery Time: 7 to 15 Days
• Packaging Details: Roll Lengths manufactured are 3 meters Min. (= 10 feet Approx.) and Max Length 15 meters produced in each size of Mandrel built woven ply hoses. ** Packaging in coils wrapped in HDPE straight stuffed from factory into direct truck/ trailer.

We are offering a wide range of 100mm ID x 4000mm (LG) Fly Ash Rubber Suction Hose.Application: Fly Ash Rubber Hose,tank, truck, Bulker loading/unloading or in-plant transfer of dry bulk cement, sand, lime, slurry etc., suction or discharge of abrasive materials.

Construction:

Lining : Uniform seamless tube of natural and synthetic blend rubber compound with excellent resistance to abrasion.

Reinforcement : Reinforcement of rubber impregnated woven textile applied on bias at approx.45 degree angle combination with galvanized steel wire

Cover : Corrugated/plain cloth marked outer cover made from natural rubber compound with excellent weather and abrasion resistant.

End Connections : Each Hose Length has soft ends for clamping or can be supplied with different type of nipples, flanges or fittings as per requirement.

Cover: W.P. of 1.0 Mpa & Min. B.P. of 3.0Mpa.

W.P. of 1.5 Mpa & Min. B.P. of 4.5Mpa .

Additional Information:

• Item Code: 100mm-FCRH-SANDHYAFLEX
• Production Capacity: 200Mtr/days
• Delivery Time: 7 to 15 Days max
• Packaging Details: Roll Lengths manufactured are 3 meters Min. (= 10 feet Approx.) and Max Length 15 meters produced in each size of Mandrel built woven ply hoses. ** Packaging in coils wrapped in HDPE straight stuffed from factory into direct truck/ trailer. **

• Tank, truck, Bulker loading/unloading or in-plant transfer of dry bulk cement, sand, lime, slurry etc., suction or discharge of abrasive materials.

• Lining: Uniform seamless tube of natural and synthetic blend rubber compound with excellent resistance to abrasion.
• Reinforcement: Reinforcement of rubber impregnated woven textile applied on bias at approx.45 degree angle combination with galvanized steel wire
• Cover: Corrugated/plain cloth marked outer cover made from natural rubber compound with excellent weather and abrasion resistant.
• End Connections: Each Hose Length has soft ends for clamping or can be supplied with different type of nipples, flanges or fittings as per requirement

Construction                                         

Additional Information:

• Item Code: 100NB-FARH-SANDHYAFLEX
• Production Capacity: 200Mtr/days
• Delivery Time: 7 to 15 Days
• Packaging Details: Packing in Coil and Straight with HDPE Cover

We are offering a wide range of Air Rubber Hose for RMC Plant.

BUSINESS POLICY

SANDHYA ENTERPRISES                                     AN ISO:9001:2015 Certified Company

Inquiry

Quotation

Purchase Order

1.      Billing Address.                            2. Delivery Address                         3. GST No                                4. Contact No

                                     Performa Invoice

Advance Payment

Take in Production as per Purchase Order

After Completed Consignment Inform to Client for Balance Payment

Dispatch the Material

Provide LR Copy

Construction                                         

Additional Information:

• Item Code: RMCPCFRH
• Production Capacity: 200mTR/DAYS
• Delivery Time: 7 to 15 days
• Packaging Details: Packing with HDPE Cover In Straigth and Coil,Roll Lengths manufactured are 3 meters Min. (= 10 feet Approx.) and Max Length 15 meters produced in each size of Mandrel built woven ply hoses. ** Packaging in coils wrapped in HDPE straight stuffed from factory into direct truck/ trailer.

Sandhya Enterprises AN ISO:9001;2015 Certified Company is manufacture Supplier and Exporter of Bulker Cement Unloading  Rubber Hose.
size:1).3" ID x5Mtr ILG)with Both End MS Flange as per ASA#.
size:2).4" ID x4Mtr ILG)with Both End MS Flange as per ASA#.       
size:3).4" ID x5Mtr ILG)with Both End MS Flange as per ASA#.
size:4).4" ID x6Mtr ILG)with Both End MS Flange as per ASA#
size:5).5" ID x4Mtr ILG)with Both End MS Flange as per ASA#
size:6).5" ID x5Mtr ILG)with Both End MS Flange as per ASA#
size:7).5" ID x6Mtr ILG)with Both End MS Flange as per ASA#.
size:8).6" ID x4Mtr ILG)with Both End MS Flange as per ASA#.
size:8).6" ID x5Mtr ILG)with Both End MS Flange as per ASA#.
size:8).6" ID x6Mtr ILG)with Both End MS Flange as per ASA#

Construction                                         

Additional Information:

• Item Code: SANDHYAFLEX-BUCFRH
• Production Capacity: 200 Mtr/day
• Delivery Time: 7 to 15 days max
• Packaging Details: Packing in Coil with HDPE Cover

We are offering a wide range of Sandhyaflex Fly Ash Cement Unloading Rubber Hose.

* Roll Lengths manufactured are 3 meters Min. (= 10 feet Approx.) and Max Length 15 meters produced in each size of Mandrel built woven ply hoses.

** Packaging in coils wrapped in HDPE  straight stuffed from factory into direct truck/ trailer.

*** End Fittings like Molded Welded / Clamped Flanges as per Class ASA150, BS 10 Table D/E in MS or SS304 material or Camlock Couplings and any other customized end connections duly fitted with hose pipe also supplied.

**** Working Pressure 10 bar rating and till 6” NB sizes also produced.

Construction                                         

Additional Information:

• Item Code: 200NB-FASH-SANDHYAFLEX
• Production Capacity: 50 Mtr/days
• Delivery Time: 7 to 15 Days
• Packaging Details: Roll Lengths manufactured are 3 meters Min. (= 10 feet Approx.) and Max Length 15 meters produced in each size of Mandrel built woven ply hoses. ** Packaging in coils wrapped in HDPE straight stuffed from factory into direct truck/ trailer. *** End Fittings like Molded Welded / Clamped Flanges as per Class ASA150, BS 10 Table D/E in MS or SS304 material or Camlock Couplings and any other customized end connections duly fitted with hose pipe also supplied. **** Working Pressure 10 bar rating and till 6¿¿¿ NB sizes also produced.

MS Flange Dimension of Class 150 Flanges As per ANSIB 16.5

Additional Information:

• Item Code: SANDHYAFLEX-BUCFRSH
• Production Capacity: 200 Mtr/days
• Delivery Time: 7 to 15 days max
• Packaging Details: Packing in coil and Straight with HDPE cover

Why are US

End Fittings like Molded Welded / Clamped Flanges as per Class ASA150, BS 10 Table D/E in MS or SS304 material or Camlock Couplings and any other customized end connections duly fitted with hose pipe also supplied.

**** Working Pressure 10 bar rating and till 6 NB sizes also produced.

Additional Information:

• Item Code: SANDHYAFLEX-BURH
• Production Capacity: 200Mtr/day
• Delivery Time: 7 to 15 days max
• Packaging Details: Packing in Coil and Straight with HDPE Cover

A water suction rubber hose is a heavy-duty, flexible hose designed to draw water (and other liquids) from a source like a tank, river, or sump and transport it to another location. It’s commonly used in:

• Agriculture (irrigation and dewatering)

• Construction (pumping out water from trenches or foundations)

• Industrial settings (moving water, slurry, or chemicals)

• Material: Usually made of durable rubber with reinforced fabric or wire helix to prevent collapsing under suction.

• Size: Typically ranges from 1 inch to 12 inches in diameter.

• Temperature range: Handles a variety of weather conditions.

• Flexibility: Remains bendable even in colder temperatures.

Would you like help choosing one for a specific use case?

Additional Information:

• Item Code: SFWSRH
• Production Capacity: 2000
• Delivery Time: 5 to17 days
• Packaging Details: Here are the complete **Packaging Details** for your **Sandhyaflex BackPVC Waterstopper**: --- ### **Packaging Details: Sandhyaflex BackPVC Waterstopper** * **Brand**: Sandhyaflex * **Product Type**: BackPVC Waterstopper * **Standard Roll Length**: 25 meters per roll * **Roll Widths Available**: 150mm, 230mm, 305mm (custom sizes available) * **Roll Thickness**: 6mm to 10mm (based on specification) --- #### **Packaging Specifications:** | Item | Description | | ------------------------------------ | ------------------------------------------------------------------------------------------ | | **Packaging Type** | Heavy-Duty HDPE Wrapping or Shrink-Wrapped Rolls | | **Protection** | Moisture-proof and dust-resistant packaging | | **Handling** | Rolls are ### 🔧 **Water Suction Rubber Hose – Overview** A **water suction hose** made of **rubber** is designed to **draw (suction) water** and other non-corrosive liquids. It’s built to withstand **negative pressure** (vacuum conditions) and is reinforced to prevent collapsing during suction. #### ✅ **Key Specifications:** - **Construction:** Rubber inner tube, reinforcement (fabric or wire helix), rubber outer cover. - **Sizes:** Common diameters: 2", 3", 4", 6", and larger. - **Length:** Typically 10 to 100 feet (custom lengths available). - **Pressure Ratings:** Vacuum up to full suction (28 inHg), discharge pressure varies (150–300 psi). - **Use Cases:** Agriculture, dewatering, construction, mining, industrial fluid handling. #### 🛠️ **Common Features:** - Abrasion-resistant - Weather and ozone-resistant - Flexible and durable - Suitable for light chemicals (some variants) Would you like help finding a supplier or comparing different hose models?

Description:
100 NB Cement Feeding Rubber Hose is a heavy-duty industrial hose designed for pneumatic conveying and transfer of cement, fly ash, sand, and other dry abrasive materials. It is specially constructed to withstand high abrasion, pressure, and continuous flow in cement plants and construction sites.

Nominal Bore (NB):

• 100 NB (4 Inch ID)

Construction:

• Inner Liner: Smooth / Corrugated Abrasion-Resistant Rubber (NR / SBR / Synthetic Rubber)

• Reinforcement: High-strength synthetic fabric / textile cord

• Outer Cover: Abrasion, weather & ozone-resistant rubber

End Fittings:

• Plain end / MS flanged end (Fixed or Rotating)

• Camlock / Victaulic coupling (optional)

Working Pressure:

• Typically 10 – 12 Bar (higher on request)

Working Temperature:

• Up to +70°C (higher temperature lining available on request)

Features:

• Excellent abrasion resistance for long service life

• Smooth bore for uninterrupted material flow

• High flexibility for easy handling and installation

• Strong reinforcement to resist pressure and vacuum

• Resistant to weather, dust, and external wear

Advantages:

• Minimizes material loss and blockage

• Reduces downtime and maintenance cost

• Ideal for continuous cement feeding operations

• Reliable performance in harsh industrial conditions

Applications:

• Cement plants

• Ready-mix concrete (RMC) plants

• Fly ash handling systems

• Construction sites

• Bulk material conveying units

Color:

• Black (standard)

Standard Length:

• 3 m, 6 m, or as per customer requirement

If you want, I can also prepare a technical datasheet, pressure vs length chart, or website-ready short description for your Sandhyaflex Cement Feeding Rubber Hose.

Additional Information:

• Item Code: 100NBCFRHSF
• Production Capacity: 200Mtr
• Delivery Time: 7 days

• Sandhya Enterprises AN ISO:9001;2015 Certified Company is manufacture and Supplier of Bulker Unloading Cement Fly Ash Rubber Hose as per IS:5137:990 Specification: Size:3" ID to 6" ID End Fitting: MS Flange as per ASA 150 # ANSI 16.5 Drilled and DIN Specification. Working Pressure -10 to 15kg/cm2 Color:Black Vaccum:500 to 700hg.
• • Rubber Sandhya Enterprises AN ISO:9001;2015 Certified Company is manufacture Supplier and Exporter of Bulker Cement Unloading Rubber Hose. size:1).3" ID x5Mtr ILG)with Both End MS Flange as per ASA#.
  • • Shock Proof Yes Material Rubber We are offering a wide range ofSilo Bulker Loading and Unloading Fly Ash Rubber Hose 125mmID. Sandhya Enterprises AN ISO:9001: 2015 Ceritified Company. Run by Mr Mithilesh Chaudahry having 20 years Experince in Rubber Hose Industries. Bank Details COMPANY NAME SANDHYA ENTERPRISES Bank HDFC Bank Ltd Branch.
    • • Sandhya Enterprises AN ISO:9001 2015 Certified Company manufacturer and Supplier of Fly Ash Rubber Hose For Bulker Cement Unloading.size:3" ID to 6" ID , Length 15.0Mtr max. Working Pressure 10Bar to 20Bar. Color Black. Top Plain and Corruagted.
      • size:
      • 3"IDx 5Mtr 
      • 4" IDx 5Mtr 
      • 5" ID x 5mtr

Additional Information:

• Production Capacity: 2000
• Delivery Time: 7
• Packaging Details: Coil

We are offering a wide range of Fly Ash Rubber Hose.We are a manufacturer and supplier of Water And Air Braided Hose. Sandhya Enterprises manufacturer,Supplier and Exporter Rubber Hose.size:3" ID to 6"ID, working Pressure 10Bar, Max Length 15 Mtr. 

Application: Fly Ash Rubber Hose,tank, truck, Bulker loading/unloading or in-plant transfer of dry bulk cement, sand, lime, slurry etc., suction or discharge of abrasive materials.

Construction:

Lining : Uniform seamless tube of natural and synthetic blend rubber compound with excellent resistance to abrasion.

Reinforcement : Reinforcement of rubber impregnated woven textile applied on bias at approx.45 degree angle combination with galvanized steel wire

Cover : Corrugated/plain cloth marked outer cover made from natural rubber compound with excellent weather and abrasion resistant.

End Connections : Each Hose Length has soft ends for clamping or can be supplied with different type of nipples, flanges or fittings as per requirement.

Cover: W.P. of 1.0 Mpa & Min. B.P. of 3.0Mpa.

W.P. of 1.5 Mpa & Min. B.P. of 4.5Mpa .Construction                                         

Additional Information:

• Item Code: SANDHYAFLEX-FARSH
• Production Capacity: 200Mtr/day
• Delivery Time: 7 to 15 days max
• Packaging Details: Packing in Straight and coil with HDPE cover