Rail and Road Tanker Oil Rubber Hose

:
Lining : Resistant to petroleum liquids. The tube of fuel dispensing hoses contains uniform seamless lining of top quality rubber that is completely resistant to petroleum products. Hose made from Polypropylene fabric and fillms with PVC coated fabric cover, inner and outer wires are galvanised MS. Smooth lining of suitable rubber compounds; highly resistant to petroleum products

Reinforcement : Plies of woven textile which contains rubber on both the sides. It is supported by the helical GS wire included in fabric plies. Plies of woven textile coated with rubber on both sides with a suitable rubber compound and helical GI wire embedded between the fabric plies

Electrical Bonding : Low resistant electrical bonding wire is in incorporated between the reinforcement plies to provide electrical continuity along the whole length of the hose. A Copper wire comprising the nos. of strands is incorporated between the reinforcement plies to provide electrical continuity throughout the hose

Cover: a great smooth synthetic compound which is highly resistant to extreme weather, abrasion, petroleum products, wear and tear. Cotton textile or synthetic material with  G. I. Embedded wire. Soft ends for clamping or can be supplied with built in nipples/flanges on request

Electrical Continuity: By providing anti-static copper wire

End Connection : The hose is available with or without flanges and with built in nipples. Normally flanged type  or  threaded  nipple  i .e.  built  in  type / vulcanize / crimped / swaged in hose. Soft ends for clamping or can be supplied with built in nipples/flanges on request

Couplings: As per BS 2464 or Lug type  or  Camlock  type.  Male or   female or both end male or female as per requirement of purchaser.

APPLICATION
The application is in aupplying the petroleum products from road rail tanker carrying these products. It is mainly used for the loading and unloading of the products such as petrol and diesel.
The hose is having smooth and abrasion resistant outer cover for use with all grades of petroleum and blended products. The lining consists of suitable rubber compound resistant to petroleum products and cover made from an oil and weather resistance rubber compound. Discharging of petrol and diesel  oil  from  tank  truck  &   between tank, & trucks & trailers, suitable. Suction and discharge hose specially designed for transfer of petroleum product by Road Tankers, rail Tankers and Loading Gantries

Length:
15 mtrs. (Tolerance + 2% -1%) upto 75 mm dia 7.5 mtrs. (Tolerance + 2% -1%) upto 300 mm dia

Working Pressure:
Hoses are available for working pressure 0.35, 0.7,1.00,1.5 Mpa i.e. 3.5, 7,10 & 15 Kg/Cm2. The test pressure being twice of the working pressure.

Types:   Type 1A - Rough bore hose, with internal and external helical wire reinforcement, corrugated outer cover and for a working pressure of 0.35 MPa & min. B.P. 1.4 MPa.
                   Type 1B - Smooth bore hose, with embedded helical wire reinforcement plain or corrugated outer cover and for a working pressure of 0.35 MPa & min. B.P. 1.4 MPa.
                   Type 2A - Rough bore hose, similar to type 1A but for a working pressure of 0.7 MPa & min. B.P. 2.8 MPa.
                   

Construction:
Lining : Resistant to petroleum liquids. The tube of fuel dispensing hoses contains uniform seamless lining of top quality rubber that is completely resistant to petroleum products. 

Reinforcement : Plies of woven textile which contains rubber on both the sides. It is supported by the helical GS wire included in fabric plies. 

Electrical Bonding : Low resistant electrical bonding wire is in incorporated between the reinforcement plies to provide electrical continuity along the whole length of the hose. A Copper wire comprising the nos. of strands is incorporated between the reinforcement plies to provide electrical continuity throughout the hose

Cover: a great smooth synthetic compound which is highly resistant to extreme weather, abrasion, petroleum products, wear and tear. Cotton textile or synthetic material with  G. I. Embedded wire. Soft ends for clamping or can be supplied with built in nipples/flanges on request

Electrical Continuity: By providing anti-static copper wire

End Connection : The hose is available with or without flanges and with built in nipples. Normally flanged type  or  threaded  nipple  i .e.  built  in  type / vulcanize / crimped / swaged in hose. Soft ends for clamping or can be supplied with built in nipples/flanges on request

Couplings: As per BS 2464 or Lug type  or  Camlock  type.  Male or   female or both end male or female as per requirement of purchaser.

APPLICATION
The application is in aupplying the petroleum products from road rail tanker carrying these products. It is mainly used for the loading and unloading of the products such as petrol and diesel.
The hose is having smooth and abrasion resistant outer cover for use with all grades of petroleum and blended products. The lining consists of suitable rubber compound resistant to petroleum products and cover made from an oil and weather resistance rubber compound. Discharging of petrol and diesel  oil  from  tank  truck  &   between tank, & trucks & trailers, suitable. Suction and discharge hose specially designed for transfer of petroleum product by Road Tankers, rail Tankers and Loading Gantries

Length:
15 mtrs. (Tolerance + 2% -1%) upto 75 mm dia 7.5 mtrs. (Tolerance + 2% -1%) upto 300 mm dia

Working Pressure:
Hoses are available for working pressure 0.35, 0.7,1.00,1.5 Mpa i.e. 3.5, 7,10 & 15 Kg/Cm2. The test pressure being twice of the working pressure.

Types:   Type 1A - Rough bore hose, with internal and external helical wire reinforcement, corrugated outer cover and for a working pressure of 0.35 MPa & min. B.P. 1.4 MPa.
                   Type 1B - Smooth bore hose, with embedded helical wire reinforcement plain or corrugated outer cover and for a working pressure of 0.35 MPa & min. B.P. 1.4 MPa.
                   Type 2A - Rough bore hose, similar to type 1A but for a working pressure of 0.7 MPa & min. B.P. 2.8 MPa.
                   Type 2B - Smooth bore hose, similar to type 1B but for a working pressure of 0.7 MPa & min. B.P. 2.8 MPa.
                   Type 3 - Smooth bore reeling hose without helical wire reinforcement for a working pressure of 1.0 MPa & min. B.P. 4.0 MPa.