Expansoin Joint Filler Board

Description

 Expansion Joint Filler Board is a pre-moulded, high performance joint filler board. It is a closed cell and of cross linked structure. It has an excellent recovery of 95% (after compression upto 50%), which makes it the most suitable product for this application. It is an exclusive product specially designed to be used as expansion joint filler in concrete, brick, block work and isolation joints. It is rot free and contains no bitumen.

Characteristics

Application

• Filling structural expansion and structural separation joints in block and in situ concrete construction including screed floors, motorways, roads, runways, pedestrian areas, bridges, curbs, basements, retaining walls, vertical structures, subways and other structures.
• Filling all types of expansion joints in piers and lateral supports like abutments
• Roads, Airport Runways, Taxi tracks and various other joints of concrete floors

Advantages

• Closed cell structure resulting negligible water/moisture absorption
• Excellent recovery after compression
• High resistance to chemical like most acids, alkalies oil and hydrocarbon
• Bitumen free hence non staining and free from bleeding
• Easy to cut, hand and install
• Rot proof hence does not age and disintegrate over prolonged use
• Use of ShaliBar/Backer rod is optional

Application Methodology

• Remove dust, flakes or foreign particles by jet of dry air to clean the surface.
• Cut ShaliTex Expansion Joint Filler Board of appropriate width from the desired sizes and place the same in the groove in a way to flush with the external surface except for space required for ShaliBar and sealants

• ·         Application

   

  Jolly Bitulex Softboard is processed from cane fibre, the raw material tested and proven to provide the best resilience. Impregnated with Bitumen in various percentages, it is a perfect base material for expansion joint fillers.

  The boards compression and recovery characteristics confirm to the U.K., U.S.A. and Indian Standards much above the required averages.

  Jolly Board Expansion Joint Filler :

  Jolly Board Expansion Joint Filler is manufactured from water resistant, bitumen impregnated, cane fibre. It is available in a wide range of sizes, both as boards & strips in thicknesses of 10 MM, 12 MM, 18 MM, 19 MM, 25 MM.

  Jolly Expansion Joint Filler displays excellent resistance to compression, with outstanding recovery characteristics. The fillers are environment friendly as opposed to the environment destroying thermocole/plastic expansion joint filler.

  Applications:

  External wall cladding: Filling structural expansion & structural separation joints in block & insitu concrete construction.
  Traffic surfaces: Filling expansion joints in motorways,roads,runways,pedestrian areas, bridges, curbs etc.
  Internal surfaces: Filling expansion joints across concrete floors, including screed f

Why are US

* Best Comunication
* Good Responce
*.Good  Price
* Good Quality
* Timely Delivery
*.Good Transport Facility
So why are delay pl contact to SANDHYA ENTERPRISES and  start today your Business with us.

·          

Applications :

·         Structural expansion joint filler for concrete brick and block work in concrete highways, airport runways parking areas, industrial flooring & taxi tracks etc.

·         Isolation to infill panels

·         Bridge decks, abutments, pier hinge joints etc.

·         As a backup support for sealant

·         Expansion joints in concrete highways, airport runways, taxi tracks etc.

·         Expansion joints in parking areas, industrial flooring etc.

·         Water retaining and water excluding structures 

We are offering a wide range of Supreme Expansion Joint Filler Board.

Features :

• Closed cell hence negligible water / water vapour absorption
• Resilient - recovers more than 96%
• Excellent chemical resistance
• Thermally stable(from - 40 °C to + 70 °C)
• Bitumen free
• Easy to use
• Rot proof and bacteria resistant

Applications :

• Structural expansion joint filler for concrete brick and block work in concrete highways, airport runways parking areas, industrial flooring & taxi tracks etc.
• Isolation to infill panels
• Bridge decks, abutments, pier hinge joints etc.
• As a backup support for sealant
• Expansion joints in concrete highways, airport runways, taxi tracks etc.
• Expansion joints in parking areas, industrial flooring etc.
• Water retaining and water excluding structures

Application

·         Filling structural expansion and structural separation joints in block and in situ concrete construction including screed floors, motorways, roads, runways, pedestrian areas, bridges, curbs, basements, retaining walls, vertical structures, subways and other structures.

·         Filling all types of expansion joints in piers and lateral supports like abutments

·         Roads, Airport Runways, Taxi tracks and various other joints of concrete floors

Advantages

·         Closed cell structure resulting negligible water/moisture absorption

·         Excellent recovery after compression

·         High resistance to chemical like most acids, alkalies oil and hydrocarbon

·         Bitumen free hence non staining and free from bleeding

·         Easy to cut, hand and install

·         Rot proof hence does not age and disintegrate over prolonged use

·         Use of ShaliBar/Backer rod is optional

Application Methodology

·         Remove dust, flakes or foreign particles by jet of dry air to clean the surface.

·         Cut ShaliTex Expansion Joint Filler Board of appropriate width from the desired sizes and place the same in the groove in a way to flush with the external surface except for space required for ShaliBar and sealants

·         In case of a new casting ShaliTex Expansion Joint Filler Board of appropriate width is fixed with copper screws before pouring concrete. The width is designed to flush with the external surface except for space required for ShaliBar and Sealants

·         In highway construction, ShaliTex Expansion Joint Filler Board is plac

• • • • It is a cross-linked, pre-moulded, high performance joint filler board. It is readily compressible and ensures low load transfer. Applications: Structural expansion joint in concrete brick and block work Isolation to infill panels Bridge decks, abutments, pier hinge joint etc. As a backup support for sealant.
      • The purpose of the expansion of expansion joint is to protect the structure from damage due to temperature changes, whereas the purpose of expansion joint filler board is to fill the gap created by expansion joint or isolation joints to avoid any foreign materials get into the gap.
      • • Impregnated with Bitumen in various percentages, it is a perfect base material for expansion joint fillers. The board’s compression and recovery characteristics confirm to the U.K., U.S.A. and Indian Standards much above the required averages.
        • • It is available in a wide range of sizes, both as boards & strips in thicknesses of 10 MM, 12 MM, 18 MM, 19 MM, 25 MM. Jolly Expansion Joint Filler displays excellent resistance to compression, with outstanding recovery characteristics.
          • • Joint fillers are relatively a compressed material so that it does not fail as the concrete grows around it and shrinks due to temperature change or movement. The joint fillers prevents untimely failure of the concrete structure. Following are the various types of joint filler materials as follows:

• • • • It is a cross-linked, pre-moulded, high performance joint filler board. It is readily compressible and ensures low load transfer. Applications: Structural expansion joint in concrete brick and block work Isolation to infill panels Bridge decks, abutments, pier hinge joint etc. As a backup support for sealant.
      • The purpose of the expansion of expansion joint is to protect the structure from damage due to temperature changes, whereas the purpose of expansion joint filler board is to fill the gap created by expansion joint or isolation joints to avoid any foreign materials get into the gap.
      • • Impregnated with Bitumen in various percentages, it is a perfect base material for expansion joint fillers. The board’s compression and recovery characteristics confirm to the U.K., U.S.A. and Indian Standards much above the required averages.
        • • It is available in a wide range of sizes, both as boards & strips in thicknesses of 10 MM, 12 MM, 18 MM, 19 MM, 25 MM. Jolly Expansion Joint Filler displays excellent resistance to compression, with outstanding recovery characteristics.
          • • Joint fillers are relatively a compressed material so that it does not fail as the concrete grows around it and shrinks due to temperature change or movement. The joint fillers prevents untimely failure of the concrete structure. Following are the various types of joint filler materials as follows:

• • • • It is a cross-linked, pre-moulded, high performance joint filler board. It is readily compressible and ensures low load transfer. Applications: Structural expansion joint in concrete brick and block work Isolation to infill panels Bridge decks, abutments, pier hinge joint etc. As a backup support for sealant.
      • The purpose of the expansion of expansion joint is to protect the structure from damage due to temperature changes, whereas the purpose of expansion joint filler board is to fill the gap created by expansion joint or isolation joints to avoid any foreign materials get into the gap.
      • • Impregnated with Bitumen in various percentages, it is a perfect base material for expansion joint fillers. The board’s compression and recovery characteristics confirm to the U.K., U.S.A. and Indian Standards much above the required averages.
        • • It is available in a wide range of sizes, both as boards & strips in thicknesses of 10 MM, 12 MM, 18 MM, 19 MM, 25 MM. Jolly Expansion Joint Filler displays excellent resistance to compression, with outstanding recovery characteristics.
          • • Joint fillers are relatively a compressed material so that it does not fail as the concrete grows around it and shrinks due to temperature change or movement. The joint fillers prevents untimely failure of the concrete structure. Following are the various types of joint filler materials as follows:

• • • • It is a cross-linked, pre-moulded, high performance joint filler board. It is readily compressible and ensures low load transfer. Applications: Structural expansion joint in concrete brick and block work Isolation to infill panels Bridge decks, abutments, pier hinge joint etc. As a backup support for sealant.
      • The purpose of the expansion of expansion joint is to protect the structure from damage due to temperature changes, whereas the purpose of expansion joint filler board is to fill the gap created by expansion joint or isolation joints to avoid any foreign materials get into the gap.
      • • Impregnated with Bitumen in various percentages, it is a perfect base material for expansion joint fillers. The board’s compression and recovery characteristics confirm to the U.K., U.S.A. and Indian Standards much above the required averages.
        • • It is available in a wide range of sizes, both as boards & strips in thicknesses of 10 MM, 12 MM, 18 MM, 19 MM, 25 MM. Jolly Expansion Joint Filler displays excellent resistance to compression, with outstanding recovery characteristics.
          • • Joint fillers are relatively a compressed material so that it does not fail as the concrete grows around it and shrinks due to temperature change or movement. The joint fillers prevents untimely failure of the concrete structure. Following are the various types of joint filler materials as follows:

• • • • It is a cross-linked, pre-moulded, high performance joint filler board. It is readily compressible and ensures low load transfer. Applications: Structural expansion joint in concrete brick and block work Isolation to infill panels Bridge decks, abutments, pier hinge joint etc. As a backup support for sealant.
      • The purpose of the expansion of expansion joint is to protect the structure from damage due to temperature changes, whereas the purpose of expansion joint filler board is to fill the gap created by expansion joint or isolation joints to avoid any foreign materials get into the gap.
      • • Impregnated with Bitumen in various percentages, it is a perfect base material for expansion joint fillers. The board’s compression and recovery characteristics confirm to the U.K., U.S.A. and Indian Standards much above the required averages.
        • • It is available in a wide range of sizes, both as boards & strips in thicknesses of 10 MM, 12 MM, 18 MM, 19 MM, 25 MM. Jolly Expansion Joint Filler displays excellent resistance to compression, with outstanding recovery characteristics.
          • • Joint fillers are relatively a compressed material so that it does not fail as the concrete grows around it and shrinks due to temperature change or movement. The joint fillers prevents untimely failure of the concrete structure. Following are the various types of joint filler materials as follows:

• • • • It is a cross-linked, pre-moulded, high performance joint filler board. It is readily compressible and ensures low load transfer. Applications: Structural expansion joint in concrete brick and block work Isolation to infill panels Bridge decks, abutments, pier hinge joint etc. As a backup support for sealant.
      • The purpose of the expansion of expansion joint is to protect the structure from damage due to temperature changes, whereas the purpose of expansion joint filler board is to fill the gap created by expansion joint or isolation joints to avoid any foreign materials get into the gap.
      • • Impregnated with Bitumen in various percentages, it is a perfect base material for expansion joint fillers. The board’s compression and recovery characteristics confirm to the U.K., U.S.A. and Indian Standards much above the required averages.
        • • It is available in a wide range of sizes, both as boards & strips in thicknesses of 10 MM, 12 MM, 18 MM, 19 MM, 25 MM. Jolly Expansion Joint Filler displays excellent resistance to compression, with outstanding recovery characteristics.
          • • Joint fillers are relatively a compressed material so that it does not fail as the concrete grows around it and shrinks due to temperature change or movement. The joint fillers prevents untimely failure of the concrete structure. Following are the various types of joint filler materials as follows:

• • • • It is a cross-linked, pre-moulded, high performance joint filler board. It is readily compressible and ensures low load transfer. Applications: Structural expansion joint in concrete brick and block work Isolation to infill panels Bridge decks, abutments, pier hinge joint etc. As a backup support for sealant.
      • The purpose of the expansion of expansion joint is to protect the structure from damage due to temperature changes, whereas the purpose of expansion joint filler board is to fill the gap created by expansion joint or isolation joints to avoid any foreign materials get into the gap.
      • • Impregnated with Bitumen in various percentages, it is a perfect base material for expansion joint fillers. The board’s compression and recovery characteristics confirm to the U.K., U.S.A. and Indian Standards much above the required averages.
        • • It is available in a wide range of sizes, both as boards & strips in thicknesses of 10 MM, 12 MM, 18 MM, 19 MM, 25 MM. Jolly Expansion Joint Filler displays excellent resistance to compression, with outstanding recovery characteristics.
          • • Joint fillers are relatively a compressed material so that it does not fail as the concrete grows around it and shrinks due to temperature change or movement. The joint fillers prevents untimely failure of the concrete structure. Following are the various types of joint filler materials as follows: