repeat">
Sandhya Enterprises
Sandhya Enterprises
Jeedimetla, Hyderabad, Telangana
GST No. 36GNLPS1299P1ZS
08048977570 94% Response Rate
Send E-mail

EPDM Tyton Gasket

Rubber Gaskets

Manufacturer of QualityDI Pipe Gasketlike Push On Joint (Tyton), ‘O’ Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets. All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality. We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them. We also manufacture Glass Separators, Rubber Inserts, Square Gaskets, Rubber Bushes, Rubber Cords, Oil Seals, Anti Vibration Rubber Pads etc.

F. C. Gaskets

F.C. Gaskets are designed for Jiffy Collar Coupling and made out of NR, SBR, EPDM Polymers. Gaskets are a vailable in all standard sizes from 80 mm to 1000 mm dia NB.

Flat Rubber Gaskets

Flat Rubber Gaskets (of 3/6mm duel thickness) are designed to make Flanged Joints and are made out of NR, SBR, EPDM Polymers. The thickness around sealing area is kept at 6 mm to account for possible machining irregularities on mating Flanges. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

LRC Gaskets

LRC Gaskets are designed for use in Jiffy Socket Leak Repair Clamps and are specially designed to facilitate permanent repair of leakages in Socket / Spigot Joints in Pipes and Fittings. The Gaskets are normally made out of EPDM Polymer and can also be made out other Polymers. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Request CallBack
  • P Type Dam Gate Seal
  • P Type Dam Gate Seal
  • P Type Dam Gate Seal
  • P Type Dam Gate Seal
  • P Type Dam Gate Seal
  • P Type Dam Gate Seal
  • P Type Dam Gate Seal
  • P Type Dam Gate Seal
  • P Type Dam Gate Seal
  • P Type Dam Gate Seal
  • P Type Dam Gate Seal
  • P Type Dam Gate Seal
  • P Type Dam Gate Seal
P Type Dam Gate Seal
Get Best Quote

P Type Dam Gate Seal

Approx. Price: Rs 1,000 / MeterGet Latest Price
Product Brochure
Product Details:
Usage/ ApplicationIndustrial
ColorBlack
Country of OriginMade in India
Dam gate seals are designed to either retain water, prevent water penetration, or limit contaminated run off in civil engineering a Dam Gate Seals Application: Quality of Rubber Concept dam gate seals are very well accepted by various Gate Designers, Fabricators as well as Contractors, and been installed by Government and Private agencies, In concrete dams, tunnels / spillways, head regulator of intake structure, by-pass channels and draft tube of power house, the flow of water is controlled with the help of hydraulic gates. To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot, 
  • Here at The Rubber Company we manufacture a wide variety of rubber gate seals to suit any application and environment. We produce our gate and dam seals from high quality rubber compounds in order to preserve the service life of the seal. The entire gate seal range features a high tensile strength as standard. Our gate seals also feature excellent abrasion and tear resistant properties. These properties are crucial as it enables the seal to withstand frequent use, while also maintaining sealing properties, If required we can coat many of our rubber gate seals with a high quality PTFE coating. A key advantage of PTFE coating is that it significantly reduces surface friction without the need for lubricant. On average the coefficient of friction can be reduced by over 70%, regardless of the base rubber compound, 
  • Flat bottom seals on high head gates should project no more than the deflection required to seal e.g. 3-5mm. If required we can coat many of our rubber gate seals with a high quality PTFE coating.

Yes! I am Interested
Watch Video
Request CallBack
  • Bottom Dam Gate Rubber Seal
  • Bottom Dam Gate Rubber Seal
  • Bottom Dam Gate Rubber Seal
  • Bottom Dam Gate Rubber Seal
  • Bottom Dam Gate Rubber Seal
  • Bottom Dam Gate Rubber Seal
  • Bottom Dam Gate Rubber Seal
  • Bottom Dam Gate Rubber Seal
  • Bottom Dam Gate Rubber Seal
  • Bottom Dam Gate Rubber Seal
  • Bottom Dam Gate Rubber Seal
  • Bottom Dam Gate Rubber Seal
  • Bottom Dam Gate Rubber Seal
Bottom Dam Gate Rubber Seal
Get Best Quote

Bottom Dam Gate Rubber Seal

Approx. Price: Rs 500 / MeterGet Latest Price
Product Brochure
  • We supply rubber gate seals for use in; dam & canal gates, radial, stop log, sluice, penstock and vertical gate applications. The different seal designs have been specifically developed in order to suit different seal types and installations.
    • Our double P gate seals provide many of the same sealing properties found in our standard P gate seals. The main difference between the two, is that our double p seals enable you to seal against two surfaces using a single profile. The bulbs can compress under pressure in order to create a watertight seal.
    • If required we can coat many of our rubber gate seals with a high quality PTFE coating. A key advantage of PTFE coating is that it significantly reduces surface friction without the need for lubricant. On average the coefficient of friction can be reduced by over 70%, regardless of the base rubber compound.
    • Tyope of Dam Gate Seal
    • 1 Side Seal
    • 2 Top Dam Gate Rubber Seal
    • 3 Bottom Dam Gate Rubber Seal
    • 3 SS Cladding Dam Gate Rubber Seal
    • 4 Brass Classing Dam Gate Rubber Seal
    • 5 P Type Dam Gate Seal
    • 6. Z Type Dam Gate Seal
    • 7. L Type Dam Gate Seal
    • 8 U Type Dam Gate Seal

Yes! I am Interested
Watch Video
Request CallBack
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
Rubber Gate Seals
Get Best Quote

Rubber Gate Seals

Approx. Price: Rs 1,800 / MeterGet Latest Price
Product Brochure
    • We supply rubber gate seals for use in; dam & canal gates, radial, stop log, sluice, penstock and vertical gate applications. The different seal designs have been specifically developed in order to suit different seal types and installations.
      • Our double P gate seals provide many of the same sealing properties found in our standard P gate seals. The main difference between the two, is that our double p seals enable you to seal against two surfaces using a single profile. The bulbs can compress under pressure in order to create a watertight seal.
      • If required we can coat many of our rubber gate seals with a high quality PTFE coating. A key advantage of PTFE coating is that it significantly reduces surface friction without the need for lubricant. On average the coefficient of friction can be reduced by over 70%, regardless of the base rubber compound.
      • Tyope of Dam Gate Seal
      • 1 Side Seal
      • 2 Top Dam Gate Rubber Seal
      • 3 Bottom Dam Gate Rubber Seal
      • 3 SS Cladding Dam Gate Rubber Seal
      • 4 Brass Classing Dam Gate Rubber Seal
      • 5 P Type Dam Gate Seal
      • 6. Z Type Dam Gate Seal
      • 7. L Type Dam Gate Seal
      • 8 U Type Dam Gate Seal
      • Various types of Gate seal Rubber are used in sealing water in dams. This types of customized items are manufactured as per client's sample, drawing & specification, we offer a wide variety of Gate seal Rubber Products which made form various materials like natural Rubber and synthetic rubber.
        • Rubber dam gate seals are resistant to Ultra Violet light and sun damage. Our gate seals meet even the strictest specifications for dam gate seals worldwide. The typical lead time is 2 to 3 weeks with expedite options available in some cases. We sell a variety of rubber gate seals specifically designed for hydraulic gates:
          • Easy assembly, perfect fit, sealing especially at the corners, no leakages, and superior durability. Rubber dam gate seals are resistant to Ultra Violet light and sun damage. Our gate seals meet even the strictest specifications for dam gate seals worldwide.
            • Flat bottom seals on high head gates should project no more than the deflection required to seal e.g. 3-5mm. If required we can coat many of our rubber gate seals with a high quality PTFE coating.



Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Center Bulb Gate Seals with Brass Cladding
  • Center Bulb Gate Seals with Brass Cladding
  • Center Bulb Gate Seals with Brass Cladding
  • Center Bulb Gate Seals with Brass Cladding
  • Center Bulb Gate Seals with Brass Cladding
  • Center Bulb Gate Seals with Brass Cladding
  • Center Bulb Gate Seals with Brass Cladding
  • Center Bulb Gate Seals with Brass Cladding
  • Center Bulb Gate Seals with Brass Cladding
  • Center Bulb Gate Seals with Brass Cladding
  • Center Bulb Gate Seals with Brass Cladding
  • Center Bulb Gate Seals with Brass Cladding
  • Center Bulb Gate Seals with Brass Cladding
Center Bulb Gate Seals with Brass Cladding
Get Best Quote

Center Bulb Gate Seals with Brass Cladding

Approx. Price: Rs 2,800 / MeterGet Latest Price
Product Brochure
    • We supply rubber gate seals for use in; dam & canal gates, radial, stop log, sluice, penstock and vertical gate applications. The different seal designs have been specifically developed in order to suit different seal types and installations.
      • Our double P gate seals provide many of the same sealing properties found in our standard P gate seals. The main difference between the two, is that our double p seals enable you to seal against two surfaces using a single profile. The bulbs can compress under pressure in order to create a watertight seal.
      • If required we can coat many of our rubber gate seals with a high quality PTFE coating. A key advantage of PTFE coating is that it significantly reduces surface friction without the need for lubricant. On average the coefficient of friction can be reduced by over 70%, regardless of the base rubber compound.
      • Tyope of Dam Gate Seal
      • 1 Side Seal
      • 2 Top Dam Gate Rubber Seal
      • 3 Bottom Dam Gate Rubber Seal
      • 3 SS Cladding Dam Gate Rubber Seal
      • 4 Brass Classing Dam Gate Rubber Seal
      • 5 P Type Dam Gate Seal
      • 6. Z Type Dam Gate Seal
      • 7. L Type Dam Gate Seal
      • 8 U Type Dam Gate Seal

Yes! I am Interested
Watch Video
Request CallBack
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
Rubber Gate Seals
Get Best Quote

Rubber Gate Seals

Approx. Price: Rs 2,500 / MeterGet Latest Price
Product Brochure
    • We supply rubber gate seals for use in; dam & canal gates, radial, stop log, sluice, penstock and vertical gate applications. The different seal designs have been specifically developed in order to suit different seal types and installations.
      • Our double P gate seals provide many of the same sealing properties found in our standard P gate seals. The main difference between the two, is that our double p seals enable you to seal against two surfaces using a single profile. The bulbs can compress under pressure in order to create a watertight seal.
      • If required we can coat many of our rubber gate seals with a high quality PTFE coating. A key advantage of PTFE coating is that it significantly reduces surface friction without the need for lubricant. On average the coefficient of friction can be reduced by over 70%, regardless of the base rubber compound.
      • Tyope of Dam Gate Seal
      • 1 Side Seal
      • 2 Top Dam Gate Rubber Seal
      • 3 Bottom Dam Gate Rubber Seal
      • 3 SS Cladding Dam Gate Rubber Seal
      • 4 Brass Classing Dam Gate Rubber Seal
      • 5 P Type Dam Gate Seal
      • 6. Z Type Dam Gate Seal
      • 7. L Type Dam Gate Seal
      • 8 U Type Dam Gate Seal

Yes! I am Interested
Watch Video
Request CallBack
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
  • Rubber Gate Seals
Rubber Gate Seals
Get Best Quote

Rubber Gate Seals

Approx. Price: Rs 2,500 / MeterGet Latest Price
Product Brochure
    • We supply rubber gate seals for use in; dam & canal gates, radial, stop log, sluice, penstock and vertical gate applications. The different seal designs have been specifically developed in order to suit different seal types and installations.
      • Our double P gate seals provide many of the same sealing properties found in our standard P gate seals. The main difference between the two, is that our double p seals enable you to seal against two surfaces using a single profile. The bulbs can compress under pressure in order to create a watertight seal.
      • If required we can coat many of our rubber gate seals with a high quality PTFE coating. A key advantage of PTFE coating is that it significantly reduces surface friction without the need for lubricant. On average the coefficient of friction can be reduced by over 70%, regardless of the base rubber compound.
      • Tyope of Dam Gate Seal
      • 1 Side Seal
      • 2 Top Dam Gate Rubber Seal
      • 3 Bottom Dam Gate Rubber Seal
      • 3 SS Cladding Dam Gate Rubber Seal
      • 4 Brass Classing Dam Gate Rubber Seal
      • 5 P Type Dam Gate Seal
      • 6. Z Type Dam Gate Seal
      • 7. L Type Dam Gate Seal
      • 8 U Type Dam Gate Seal

Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Hollow Dam Gate Seals
  • Hollow Dam Gate Seals
  • Hollow Dam Gate Seals
  • Hollow Dam Gate Seals
  • Hollow Dam Gate Seals
  • Hollow Dam Gate Seals
  • Hollow Dam Gate Seals
  • Hollow Dam Gate Seals
  • Hollow Dam Gate Seals
  • Hollow Dam Gate Seals
  • Hollow Dam Gate Seals
  • Hollow Dam Gate Seals
  • Hollow Dam Gate Seals
Hollow Dam Gate Seals
Get Best Quote

Hollow Dam Gate Seals

Approx. Price: Rs 2,500 / MeterGet Latest Price
Product Brochure
    • We supply rubber gate seals for use in; dam & canal gates, radial, stop log, sluice, penstock and vertical gate applications. The different seal designs have been specifically developed in order to suit different seal types and installations.
      • Our double P gate seals provide many of the same sealing properties found in our standard P gate seals. The main difference between the two, is that our double p seals enable you to seal against two surfaces using a single profile. The bulbs can compress under pressure in order to create a watertight seal.
      • If required we can coat many of our rubber gate seals with a high quality PTFE coating. A key advantage of PTFE coating is that it significantly reduces surface friction without the need for lubricant. On average the coefficient of friction can be reduced by over 70%, regardless of the base rubber compound.
      • Tyope of Dam Gate Seal
      • 1 Side Seal
      • 2 Top Dam Gate Rubber Seal
      • 3 Bottom Dam Gate Rubber Seal
      • 3 SS Cladding Dam Gate Rubber Seal
      • 4 Brass Classing Dam Gate Rubber Seal
      • 5 P Type Dam Gate Seal
      • 6. Z Type Dam Gate Seal
      • 7. L Type Dam Gate Seal
      • 8 U Type Dam Gate Seal

Yes! I am Interested
Watch Video
Request CallBack
  • Dam Gate Seals Corner
  • Dam Gate Seals Corner
  • Dam Gate Seals Corner
  • Dam Gate Seals Corner
  • Dam Gate Seals Corner
  • Dam Gate Seals Corner
  • Dam Gate Seals Corner
  • Dam Gate Seals Corner
  • Dam Gate Seals Corner
  • Dam Gate Seals Corner
  • Dam Gate Seals Corner
  • Dam Gate Seals Corner
  • Dam Gate Seals Corner
Dam Gate Seals Corner
Get Best Quote

Dam Gate Seals Corner

Approx. Price: Rs 3,000 / NumberGet Latest Price
Product Brochure
    • We supply rubber gate seals for use in; dam & canal gates, radial, stop log, sluice, penstock and vertical gate applications. The different seal designs have been specifically developed in order to suit different seal types and installations.
      • Our double P gate seals provide many of the same sealing properties found in our standard P gate seals. The main difference between the two, is that our double p seals enable you to seal against two surfaces using a single profile. The bulbs can compress under pressure in order to create a watertight seal.
      • If required we can coat many of our rubber gate seals with a high quality PTFE coating. A key advantage of PTFE coating is that it significantly reduces surface friction without the need for lubricant. On average the coefficient of friction can be reduced by over 70%, regardless of the base rubber compound.
      • Tyope of Dam Gate Seal
      • 1 Side Seal
      • 2 Top Dam Gate Rubber Seal
      • 3 Bottom Dam Gate Rubber Seal
      • 3 SS Cladding Dam Gate Rubber Seal
      • 4 Brass Classing Dam Gate Rubber Seal
      • 5 P Type Dam Gate Seal
      • 6. Z Type Dam Gate Seal
      • 7. L Type Dam Gate Seal
      • 8 U Type Dam Gate Seal

Yes! I am Interested
Watch Video
Request CallBack
  • Dam  Gate Seals
  • Dam  Gate Seals
  • Dam  Gate Seals
  • Dam  Gate Seals
  • Dam  Gate Seals
  • Dam  Gate Seals
  • Dam  Gate Seals
  • Dam  Gate Seals
  • Dam  Gate Seals
  • Dam  Gate Seals
  • Dam  Gate Seals
  • Dam  Gate Seals
  • Dam  Gate Seals
Dam  Gate Seals
Get Best Quote

Dam Gate Seals

Approx. Price: Rs 2,000 / MeterGet Latest Price
Product Brochure
    • We supply rubber gate seals for use in; dam & canal gates, radial, stop log, sluice, penstock and vertical gate applications. The different seal designs have been specifically developed in order to suit different seal types and installations.
      • Our double P gate seals provide many of the same sealing properties found in our standard P gate seals. The main difference between the two, is that our double p seals enable you to seal against two surfaces using a single profile. The bulbs can compress under pressure in order to create a watertight seal.
      • If required we can coat many of our rubber gate seals with a high quality PTFE coating. A key advantage of PTFE coating is that it significantly reduces surface friction without the need for lubricant. On average the coefficient of friction can be reduced by over 70%, regardless of the base rubber compound.
      • Tyope of Dam Gate Seal
      • 1 Side Seal
      • 2 Top Dam Gate Rubber Seal
      • 3 Bottom Dam Gate Rubber Seal
      • 3 SS Cladding Dam Gate Rubber Seal
      • 4 Brass Classing Dam Gate Rubber Seal
      • 5 P Type Dam Gate Seal
      • 6. Z Type Dam Gate Seal
      • 7. L Type Dam Gate Seal
      • 8 U Type Dam Gate Seal

Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Tyton Rubber Ring
  • Tyton Rubber Ring
  • Tyton Rubber Ring
  • Tyton Rubber Ring
  • Tyton Rubber Ring
  • Tyton Rubber Ring
  • Tyton Rubber Ring
  • Tyton Rubber Ring
  • Tyton Rubber Ring
  • Tyton Rubber Ring
  • Tyton Rubber Ring
  • Tyton Rubber Ring
  • Tyton Rubber Ring
Tyton Rubber Ring
Get Best Quote

Tyton Rubber Ring

Approx. Price: Rs 325 / PieceGet Latest Price
Product Brochure
  • Di pipe gaskets are manufactured using EPDM rubber which provides improved performance when compared with traditional natural rubber. Joints can be deflected and permit axial movement to compensate for thermal expansion and contraction. Size Range: DN80 – DN1200.
    • Neoprene gaskets are commonly used with Ductile iron pipe when dealing with greasy waste. Their use includes: Additionally, Viton push-on joint gaskets have the highest maximum service temperature of 212 degrees Fahrenheit, making the Viton gasket the best overall and all-around specialty gasket for Ductile iron pipe.
      • SANDHYAFLEX is one of the leading tyton gasket manufacturers in India. The TYTON® Push-On Gasket is used in the TYTON JOINT® Ductile Iron Pipe & Fittings. Push On Joint (Tyton) of Ductile Iron Pipe holds dual hardness gaskets, which are made from vulcanized synthetic rubber, and meet the requirements of the WRAS, BIS, ISO 4633, EN 681 and AS 681
        • Nitrile push joint gaskets for a maximum service temperature of 150 degrees Fahrenheit for water and sewer applications. Close-up of a Nitrile (NBR) (Acrylonitrile Butadiene) gasket. Neoprene gaskets are commonly used with Ductile iron pipe when dealing with greasy waste.

Yes! I am Interested
Watch Video
Request CallBack
  • Tyton Gasket
  • Tyton Gasket
  • Tyton Gasket
  • Tyton Gasket
  • Tyton Gasket
  • Tyton Gasket
  • Tyton Gasket
  • Tyton Gasket
  • Tyton Gasket
  • Tyton Gasket
  • Tyton Gasket
  • Tyton Gasket
  • Tyton Gasket
Tyton Gasket
Get Best Quote

Tyton Gasket

Approx. Price: Rs 250 / PieceGet Latest Price
Product Brochure
  • Di pipe gaskets are manufactured using EPDM rubber which provides improved performance when compared with traditional natural rubber. Joints can be deflected and permit axial movement to compensate for thermal expansion and contraction. Size Range: DN80 – DN1200.
    • Neoprene gaskets are commonly used with Ductile iron pipe when dealing with greasy waste. Their use includes: Additionally, Viton push-on joint gaskets have the highest maximum service temperature of 212 degrees Fahrenheit, making the Viton gasket the best overall and all-around specialty gasket for Ductile iron pipe.
      • SANDHYAFLEX is one of the leading tyton gasket manufacturers in India. The TYTON® Push-On Gasket is used in the TYTON JOINT® Ductile Iron Pipe & Fittings. Push On Joint (Tyton) of Ductile Iron Pipe holds dual hardness gaskets, which are made from vulcanized synthetic rubber, and meet the requirements of the WRAS, BIS, ISO 4633, EN 681 and AS 681
        • Nitrile push joint gaskets for a maximum service temperature of 150 degrees Fahrenheit for water and sewer applications. Close-up of a Nitrile (NBR) (Acrylonitrile Butadiene) gasket. Neoprene gaskets are commonly used with Ductile iron pipe when dealing with greasy waste.

Yes! I am Interested
Watch Video
Request CallBack
  • Tyton Ring
  • Tyton Ring
  • Tyton Ring
  • Tyton Ring
  • Tyton Ring
  • Tyton Ring
  • Tyton Ring
  • Tyton Ring
  • Tyton Ring
  • Tyton Ring
  • Tyton Ring
  • Tyton Ring
  • Tyton Ring
Tyton Ring
Get Best Quote

Tyton Ring

Approx. Price: Rs 300 / PieceGet Latest Price
Product Brochure
  • Di pipe gaskets are manufactured using EPDM rubber which provides improved performance when compared with traditional natural rubber. Joints can be deflected and permit axial movement to compensate for thermal expansion and contraction. Size Range: DN80 – DN1200.
    • Neoprene gaskets are commonly used with Ductile iron pipe when dealing with greasy waste. Their use includes: Additionally, Viton push-on joint gaskets have the highest maximum service temperature of 212 degrees Fahrenheit, making the Viton gasket the best overall and all-around specialty gasket for Ductile iron pipe.
      • SANDHYAFLEX is one of the leading tyton gasket manufacturers in India. The TYTON® Push-On Gasket is used in the TYTON JOINT® Ductile Iron Pipe & Fittings. Push On Joint (Tyton) of Ductile Iron Pipe holds dual hardness gaskets, which are made from vulcanized synthetic rubber, and meet the requirements of the WRAS, BIS, ISO 4633, EN 681 and AS 681
        • Nitrile push joint gaskets for a maximum service temperature of 150 degrees Fahrenheit for water and sewer applications. Close-up of a Nitrile (NBR) (Acrylonitrile Butadiene) gasket. Neoprene gaskets are commonly used with Ductile iron pipe when dealing with greasy waste.

Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Rubber Flange Gasket
  • Rubber Flange Gasket
  • Rubber Flange Gasket
  • Rubber Flange Gasket
  • Rubber Flange Gasket
  • Rubber Flange Gasket
  • Rubber Flange Gasket
  • Rubber Flange Gasket
  • Rubber Flange Gasket
  • Rubber Flange Gasket
  • Rubber Flange Gasket
  • Rubber Flange Gasket
  • Rubber Flange Gasket
Rubber Flange Gasket
Get Best Quote

Rubber Flange Gasket

Approx. Price: Rs 250 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Number
Thickness2mm to 50mm
Size25mm ID to 2000mm ID
BrandSandhyaflex
ApplicationPacking and Sealing for Flange
ShapeFlat Gasket
MaterialNatural Rubber
Packaging TypePolybag
ColorBlue
DiameterAs per customers requirement
Hardness55 to 65 Shore A
TypeGasket
Elongation400%
FinishSmooth
Temperature70Deg C
Operating Temperature40 to 70 Date
Country of OriginMade in India
Our company has made a reputed name for itself in the field of offering Rubber Flange Gasket.

Features:
  • Abrasion free
  • Strong design
  • Superb strength

Applications:
  • Automobiles
  • Shipping

Additional Information:
  • Item Code: RG
  • Production Capacity: 100Nos/day
  • Delivery Time: 7 to 15 Days
  • Packaging Details: Packing in HDPE Bag
Yes! I am Interested
Watch Video
Request CallBack
  • D.I Pipe Rubber Gasket
  • D.I Pipe Rubber Gasket
  • D.I Pipe Rubber Gasket
  • D.I Pipe Rubber Gasket
  • D.I Pipe Rubber Gasket
  • D.I Pipe Rubber Gasket
  • D.I Pipe Rubber Gasket
  • D.I Pipe Rubber Gasket
  • D.I Pipe Rubber Gasket
  • D.I Pipe Rubber Gasket
  • D.I Pipe Rubber Gasket
  • D.I Pipe Rubber Gasket
  • D.I Pipe Rubber Gasket
D.I Pipe Rubber Gasket
Get Best Quote

D.I Pipe Rubber Gasket

Approx. Price: Rs 230 / PieceGet Latest Price
Product Brochure
  • Di pipe gaskets are manufactured using EPDM rubber which provides improved performance when compared with traditional natural rubber. Joints can be deflected and permit axial movement to compensate for thermal expansion and contraction. Size Range: DN80 – DN1200.
    • Neoprene gaskets are commonly used with Ductile iron pipe when dealing with greasy waste. Their use includes: Additionally, Viton push-on joint gaskets have the highest maximum service temperature of 212 degrees Fahrenheit, making the Viton gasket the best overall and all-around specialty gasket for Ductile iron pipe.
      • SANDHYAFLEX is one of the leading tyton gasket manufacturers in India. The TYTON® Push-On Gasket is used in the TYTON JOINT® Ductile Iron Pipe & Fittings. Push On Joint (Tyton) of Ductile Iron Pipe holds dual hardness gaskets, which are made from vulcanized synthetic rubber, and meet the requirements of the WRAS, BIS, ISO 4633, EN 681 and AS 681
        • Nitrile push joint gaskets for a maximum service temperature of 150 degrees Fahrenheit for water and sewer applications. Close-up of a Nitrile (NBR) (Acrylonitrile Butadiene) gasket. Neoprene gaskets are commonly used with Ductile iron pipe when dealing with greasy waste.

Yes! I am Interested
Watch Video
Request CallBack
  • Sandhyaflex RCC Pipe Rubber Ring
  • Sandhyaflex RCC Pipe Rubber Ring
  • Sandhyaflex RCC Pipe Rubber Ring
  • Sandhyaflex RCC Pipe Rubber Ring
  • Sandhyaflex RCC Pipe Rubber Ring
  • Sandhyaflex RCC Pipe Rubber Ring
  • Sandhyaflex RCC Pipe Rubber Ring
  • Sandhyaflex RCC Pipe Rubber Ring
  • Sandhyaflex RCC Pipe Rubber Ring
Sandhyaflex RCC Pipe Rubber Ring
Get Best Quote

Sandhyaflex RCC Pipe Rubber Ring

Approx. Price: Rs 90 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Number
Diametermore than 100 mm
MaterialNatural Rubber
Usage/ApplicationIndustrial
ApplicationRCC hume Pipe
Packaging TypePolybag
ColorBlack
Thickness56,8.10.12.16.20,25mm
SizeSr.No Size Rate Rs/Nos 1 150 20 2 200 24 3 250 29 4 300 36 5 350 68 6 400 85 7 450 94 8 500 104 9 60
StyleSANDHYA ENTERISES is a prominent manufacturer and supplier of a comprehensive range of Rubber Rings
BrandSandhyaflex
Weight30,50,60,80,90,100,120,130,150,180
Product TypeRing type
Temperature40 Deg C
HardnessSr.No. Description Specified 1 Physical Properties Before Ageing a Hardness 60+5/-4 IRHD b Tensile
ShapeRing Gasket
GradeType 3
Operating Temp.SANDHYA ENTERISES is a prominent manufacturer and supplier of a comprehensive range of Rubber Rings
Density1.35
I Deal InNew Only
Is It CustomizedCustomized
FeaturesSANDHYA ENTERISES is a prominent manufacturer and supplier of a comprehensive range of Rubber Rings
Material GradeSANDHYA ENTERISES is a prominent manufacturer and supplier of a comprehensive range of Rubber Rings
FinishSmooth
Model Name/NumberRubber Gasket For RCC Pipe
Country of OriginMade in India
Horizontal and Vertical cast Pipe Rubber Rings as per IS:5382

SANDHYA ENTERISES  is a prominent manufacturer and supplier of a comprehensive range of Rubber Rings for RCC Horizontal and Vertical cast pipes NP2, Np3, Np4. Our range of gaskets is manufactured in accordance with international standards which caters to the needs of various areas such as water supply, irrigation, drainage, power generation and rail transport. Our rubber rings are used for providing excellent sealing and for leakage prevention. The rubber rings manufactured are IS:5382 , WRAS, EN 681, AS 681 approved which ranges from 100 mm upto 2600 mm. The rubber rings are suitable for RCC pipes as per IS:458

Rubber Ring For RCC Pipe We are a prominent manufacturer and supplier of a comprehensive range of Rubber Ring for RCC Pipes and Restressed Pipes NP 2, 3, 4. Our range has been manufactured in accordance with international standards. RCC and pre-stressed pipes are catering to the needs of various areas such as water supply, irrigation, drainage, power generation and rail transport. Our Rubber Rings are used for providing excellent sealing and leakage prevention of fluid.

The rubber rings are manufactured as per IS:5382 with ISI mark from 100 mm to 2600 mm. The rubber rings are suitable for RCC pipes as per IS:458

Sr.No.

Description

Specified

1

Physical Properties Before Ageing

 

a

Hardness

60+5/-4 IRHD

b

Tensile Strength

11MPa Min

c

Elongation at Break

325% Min

2

Physical Proferties Agter Ageing at 700 C

 

a

Change in Hardness

-5/+8 IRHD

b

Change in Tensile Strength

+20%

c

Change in Elongation at Break

-30/+10%

3

Compression Set at 70oC for 24 hrs

 

a

Compression Set

25%

 

 

 


Additional Information:
  • Item Code: RCCRR-SANDHYAFLEX
  • Production Capacity: 500Nos.day
  • Delivery Time: 7 to 15 days
  • Packaging Details: Packing with HDPE Cover
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Black EPDM Tyton Gasket
  • Black EPDM Tyton Gasket
  • Black EPDM Tyton Gasket
  • Black EPDM Tyton Gasket
  • Black EPDM Tyton Gasket
  • Black EPDM Tyton Gasket
  • Black EPDM Tyton Gasket
  • Black EPDM Tyton Gasket
  • Black EPDM Tyton Gasket
  • Black EPDM Tyton Gasket
  • Black EPDM Tyton Gasket
  • Black EPDM Tyton Gasket
  • Black EPDM Tyton Gasket
Black EPDM Tyton Gasket
Get Best Quote

Black EPDM Tyton Gasket

Approx. Price: Rs 32 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Piece
ThicknessAs per customers requirement
Type50 Hardness and 80 Hardness
BrandSandhyaflex
Size80mm to 100mm
ShapeCircle
FinishingSmooth
Hardness50/80 Shore A
Packaging TypePacking depend of Dimension
DiameterAs per customers requirement
Temperature-10 Deg to 150Deg C
FinishSmooth
Usage/ApplicationSealing for DI,CI Pipe Gasket
Pressure1 to 1.5 bar
ColorBlack
MaterialEPDM
Country of OriginMade in India
Sandhya Enterprises is a Manufacturer and Supplier of Black EPDM Tyton Gasket.

Rubber Gaskets

Manufacturer of Quality DI Pipe Gasket like Push On Joint (Tyton), ‘O’ Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets. All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality. We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them. We also manufacture Glass Separators, Rubber Inserts, Square Gaskets, Rubber Bushes, Rubber Cords, Oil Seals, Anti Vibration Rubber Pads etc.

F. C. Gaskets

F.C. Gaskets are designed for Jiffy Collar Coupling and made out of NR, SBR, EPDM Polymers. Gaskets are a vailable in all standard sizes from 80 mm to 1000 mm dia NB.

Flat Rubber Gaskets

Flat Rubber Gaskets (of 3/6mm duel thickness) are designed to make Flanged Joints and are made out of NR, SBR, EPDM Polymers. The thickness around sealing area is kept at 6 mm to account for possible machining irregularities on mating Flanges. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

LRC Gaskets

LRC Gaskets are designed for use in Jiffy Socket Leak Repair Clamps and are specially designed to facilitate permanent repair of leakages in Socket / Spigot Joints in Pipes and Fittings. The Gaskets are normally made out of EPDM Polymer and can also be made out other Polymers. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Modified J - II Gaskets

Modified J – II Gaskets are designed for Jiffy II M/J Fittings and are made out of EPDM Polymer. This Gasket used in pipe-fittings industries. Gaskets are available in all standard sizes from 80 mm to 300 mm dia NB.

Rubber Gasket for M.J Joints

These conical shaped M/J Rubber Gaskets are designed for use in Mechanical Joint pipe fittings and are manufactured out of EPDM Polymer. The Gaskets are interchangeable and are available in all standard sizes from 80 mm dia to 1000 mm dia NB.

Rubber Gasket for Push-on Joints (T-Joint)

Rubber Gaskets for Push on Joint (Tyton Gasket) are made out of NR, SBR, EPDM Polymer and are suitable for jointing Tyton Joint C.I. / D.I. Pipes. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Sealing O Rings

Rubber O Rings made out of NR, SBR, EPDM, . These Gaskets are used in C.I. ‘D’ Joints A.C. Pipes and RCC pressure pipes. Gaskets are available in all standard sizes from 80 mm to 2000 mm dia NB.


Additional Information:
  • Production Capacity: 100 peice
Yes! I am Interested
Watch Video
Request CallBack
  • DI Pipe Black Rubber Gasket
  • DI Pipe Black Rubber Gasket
  • DI Pipe Black Rubber Gasket
  • DI Pipe Black Rubber Gasket
  • DI Pipe Black Rubber Gasket
  • DI Pipe Black Rubber Gasket
  • DI Pipe Black Rubber Gasket
  • DI Pipe Black Rubber Gasket
  • DI Pipe Black Rubber Gasket
  • DI Pipe Black Rubber Gasket
  • DI Pipe Black Rubber Gasket
  • DI Pipe Black Rubber Gasket
  • DI Pipe Black Rubber Gasket
DI Pipe Black Rubber Gasket
Get Best Quote

DI Pipe Black Rubber Gasket

Approx. Price: Rs 4,250 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Piece
ThicknessAs per customers requirement
ApplicationRubber Bushes,Rubber Cords,Oil Seals,Anti Vibration Rubber Pads
BrandSandhyaflex
Size80 to 2000 mm
ColorBlack
Hardness50/80 Shore A
ShapeRound
DiameterAs per customers requirement
FinishSmooth
Model Name/NumberDI Pipe Black Rubber Gasket
MaterialRubber
Sandhya Enterprises is a Manufacturer and Supplier of DI Pipe Black Rubber Gasket.

Rubber Gaskets

Manufacturer of Quality DI Pipe Gasket like Push On Joint (Tyton), ‘O’ Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets. All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality. We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them. We also manufacture Glass Separators, Rubber Inserts, Square Gaskets, Rubber Bushes, Rubber Cords, Oil Seals, Anti Vibration Rubber Pads etc.

F. C. Gaskets

F.C. Gaskets are designed for Jiffy Collar Coupling and made out of NR, SBR, EPDM Polymers. Gaskets are a vailable in all standard sizes from 80 mm to 1000 mm dia NB.

Flat Rubber Gaskets

Flat Rubber Gaskets (of 3/6mm duel thickness) are designed to make Flanged Joints and are made out of NR, SBR, EPDM Polymers. The thickness around sealing area is kept at 6 mm to account for possible machining irregularities on mating Flanges. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

LRC Gaskets

LRC Gaskets are designed for use in Jiffy Socket Leak Repair Clamps and are specially designed to facilitate permanent repair of leakages in Socket / Spigot Joints in Pipes and Fittings. The Gaskets are normally made out of EPDM Polymer and can also be made out other Polymers. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Modified J - II Gaskets

Modified J – II Gaskets are designed for Jiffy II M/J Fittings and are made out of EPDM Polymer. This Gasket used in pipe-fittings industries. Gaskets are available in all standard sizes from 80 mm to 300 mm dia NB.

Rubber Gasket for M.J Joints

These conical shaped M/J Rubber Gaskets are designed for use in Mechanical Joint pipe fittings and are manufactured out of EPDM Polymer. The Gaskets are interchangeable and are available in all standard sizes from 80 mm dia to 1000 mm dia NB.

Rubber Gasket for Push-on Joints (T-Joint)

Rubber Gaskets for Push on Joint (Tyton Gasket) are made out of NR, SBR, EPDM Polymer and are suitable for jointing Tyton Joint C.I. / D.I. Pipes. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Sealing O Rings

Rubber O Rings made out of NR, SBR, EPDM, . These Gaskets are used in C.I. ‘D’ Joints A.C. Pipes and RCC pressure pipes. Gaskets are available in all standard sizes from 80 mm to 2000 mm dia NB.


Yes! I am Interested
Watch Video
Request CallBack
  • PVC Pipe Rubber Gasket
  • PVC Pipe Rubber Gasket
  • PVC Pipe Rubber Gasket
  • PVC Pipe Rubber Gasket
  • PVC Pipe Rubber Gasket
  • PVC Pipe Rubber Gasket
  • PVC Pipe Rubber Gasket
  • PVC Pipe Rubber Gasket
  • PVC Pipe Rubber Gasket
  • PVC Pipe Rubber Gasket
  • PVC Pipe Rubber Gasket
  • PVC Pipe Rubber Gasket
  • PVC Pipe Rubber Gasket
PVC Pipe Rubber Gasket
Get Best Quote

PVC Pipe Rubber Gasket

Approx. Price: Rs 55 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Piece
ThicknessAs per customers requirement
ShapeRing Gasket
Size63 to 400mm
DiameterAs per customers requirement
Elongation400%
FinishSmooth
Hardness60 Shore A
Pressure5kg/cm2
Temperature-10 to 100 Degree C
WeightAs per customers requirement
Model Name/NumberPVC Pipe Rubber Gasket
Tensile Strength12MPa
ColorBlack
MaterialRubber
BrandSandhyaflex
I Deal InNew Only
Sandhya Enterprises clients can avail from us PVC Pipe Rubber Gasket for UPVC Pipes, DI pipe, RCC pipes, GRP pipes , etc. 

These Pipe Rubber Gaskets have been specially designed and manufactured to meet all types of pipes. Available in different dimensions, our range is acknowledged for its durability, abrasion resistance and high elasticity. These Pipe Rubber Gaskets can be available in EPDM.

Additional Information:
  • Production Capacity: 100 piece
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
  • Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
  • Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
  • Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
  • Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
  • Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
  • Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
  • Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
  • Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
  • Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
  • Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
  • Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
  • Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm
Get Best Quote

Sandhyaflex Elastomeric RCC Pipe Gasket Size-150mm

Approx. Price: Rs 45 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Number
Usage/ApplicationIndustrial
ThicknessAs per customers requirement
ApplicationSealing for PVC Pipe
BrandSandhyaflex
MaterialRubber
SizeAs per customers requirement
ColorBlack
ShapeRound
Diameter63 to 400mm
Elongation400%
FinishSmooth
Pressure5 Bar
Temperature-10 Deg to 150 Deg C
WeightAs per customers requirement
Model Name/NumberElastomeric RCC Gasket
Tensile Strength11 MPa
Operating PressureRCC Horizontal and Vertical cast Pipe Rubber Rings as per IS:5382 SANDHYA ENTERISES is a prominent
Packaging TypePacking in HDPE Bag
Country of OriginMade in India
RCC Horizontal and Vertical cast Pipe Rubber Rings as per IS:5382

Sr.No

Size

Rate Rs/Nos

1

150

20

2

200

24

3

250

29

4

300

36

5

350

68

6

400

85

7

450

94

8

500

104

9

600

150

10

700

210

11

800

246

12

900

270

13

100

354

 

 

RCC Horizontal and Vertical cast Pipe Rubber Rings as per IS:5382

SANDHYA ENTERISES  is a prominent manufacturer and supplier of a comprehensive range of Rubber Rings for RCC Horizontal and Vertical cast pipes NP2, Np3, Np4. Our range of gaskets is manufactured in accordance with international standards which caters to the needs of various areas such as water supply, irrigation, drainage, power generation and rail transport. Our rubber rings are used for providing excellent sealing and for leakage prevention. The rubber rings manufactured are IS:5382 , WRAS, EN 681, AS 681 approved which ranges from 100 mm upto 2600 mm. The rubber rings are suitable for RCC pipes as per IS:458

Rubber Ring For RCC Pipe We are a prominent manufacturer and supplier of a comprehensive range of Rubber Ring for RCC Pipes and Restressed Pipes NP 2, 3, 4. Our range has been manufactured in accordance with international standards. RCC and pre-stressed pipes are catering to the needs of various areas such as water supply, irrigation, drainage, power generation.

 

 

 




Additional Information:
  • Item Code: RCCPRR-SANDHYAFLEX
  • Production Capacity: 1000Nos
  • Delivery Time: 10 to 25 days
  • Packaging Details: Packing in HDPE bag
Yes! I am Interested
Watch Video
Request CallBack
  • Sandhyaflex Reka EPDM Gasket
  • Sandhyaflex Reka EPDM Gasket
  • Sandhyaflex Reka EPDM Gasket
  • Sandhyaflex Reka EPDM Gasket
  • Sandhyaflex Reka EPDM Gasket
  • Sandhyaflex Reka EPDM Gasket
  • Sandhyaflex Reka EPDM Gasket
  • Sandhyaflex Reka EPDM Gasket
  • Sandhyaflex Reka EPDM Gasket
  • Sandhyaflex Reka EPDM Gasket
  • Sandhyaflex Reka EPDM Gasket
Sandhyaflex Reka EPDM Gasket
Get Best Quote

Sandhyaflex Reka EPDM Gasket

Approx. Price: Rs 210 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Piece
ThicknessAs per customers requirement
ApplicationFRP Pipe Gasket
Usage/ApplicationIndustrial
TypeGRP EPDM Reka Rings- SANDHYA ENTERPRISES manufactures an exhaustive range of EPDM pipe seals for GRP
BrandSandhyaflex
MaterialRubber
Size100mm to 500mm
Finishingsmooth
Shapecorrugated
Hardness60 Shore A
Packaging TypePacking in HDPE Bag
DiameterAs per customers requirement
FinishSmooth
Temperature-10 Deg to 150 Deg C
WeightAs per customers requirement
Model Name/NumberRubber Gasket
Tensile Strength11 MPa
ColorBlack
I Deal InNew Only
Country of OriginMade in India

GRP EPDM Reka Rings- SANDHYA ENTERPRISES manufactures an exhaustive range of EPDM pipe seals for GRP pipes in diameters ranging from 80mm to 4000mm. Our seals are manufactured in various stock elastomeric compounds in compliance with worldwide regulations including WRAS and BSEN 681 The unique lip design of the Reka profile reduces installation time and accommodates change in flow direction and to eliminate permeation. 

Our pipe seals conform to various international specifications such as BS: 2494, DIN 4060, IS 5382, BS EN 681-1 , ASTM F 477, etc. Pipe seals for the Indian Market are approved by the Bureau of Indian Standards and carry the "ISI" mark.

Applications Include : 

·  • Potable and Raw Water Supply

·  • Sewage Disposal

·  • Storm Water Drainage

·  • Industrial Effluents

·  • Sea Water Processing

 

·         Water transmission and distribution (portable and raw water)

·         Sanitary sewerage collection and outfalls

·         Storm sewers and drainage

·         Sea water intake, outfalls and cooling water lines

·         Industrial effluents

We manufacture the complete range of Reka type sealing gaskets from sizes 100 mm to 4000 mm pipe diameters. All our GRP gaskets meet the requirements and tolerances set by IS:5382, BSEN 681-1,ISO 4633,DIN:4060 in addition to purchase acceptance standards set by customers.

THE REKA GASKET OFFERS THE FOLLOWING BENEFITS :

·         Tight, efficient joints designed to eliminate infiltration and exfiltration.

·         Easy of joining, reducing installation time.

·         Accommodates small changes in line direction without fittings, or differential settlement.

We offer our products all over India. Our large product line, production capabilities, advanced R&D, quality control unit and good financial position help us in meeting the varied requirements of the clients. Our robust infrastructure enables us to enhance the production capacity and customize the product line as per their requirements. We use road transportation mediums to timely deliver our products.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Additional Information:
  • Item Code: REPDMG-SANDHYAFLEX
  • Production Capacity: 100 piece
  • Delivery Time: 7 to 25 days
  • Packaging Details: Packing in HDPE Bag
Yes! I am Interested
Watch Video
Request CallBack
  • Hume Pipe EPDM Gasket
  • Hume Pipe EPDM Gasket
  • Hume Pipe EPDM Gasket
  • Hume Pipe EPDM Gasket
  • Hume Pipe EPDM Gasket
  • Hume Pipe EPDM Gasket
  • Hume Pipe EPDM Gasket
  • Hume Pipe EPDM Gasket
  • Hume Pipe EPDM Gasket
  • Hume Pipe EPDM Gasket
  • Hume Pipe EPDM Gasket
  • Hume Pipe EPDM Gasket
  • Hume Pipe EPDM Gasket
Hume Pipe EPDM Gasket
Get Best Quote

Hume Pipe EPDM Gasket

Approx. Price: Rs 1,955 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Number
ThicknessAs per customer requirement
Usage/ApplicationIndustrial
Type60 Shore A
ApplicationPacking and Sealing
BrandSandhyaflex
MaterialEPDM
Size80 mm to 1000 mm
ColorBlack
FinishingSmooth
ShapeCircle
Packaging TypePacking depend of Dimension
Elongation400/125 %
FinishSmooth
Hardness50/80 Shore A
Temperature-10 to 150 Degree C
Tensile Strength11 MPa
Country of OriginMade in India
Sandhya Enterprises manufacturer and Supplier of Hume Pipe EPDM Gasket.

Rubber Gaskets

Manufacturer of Quality DI Pipe Gasket like Push On Joint (Tyton), ‘O’ Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets. All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality. We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them. We also manufacture Glass Separators, Rubber Inserts, Square Gaskets, Rubber Bushes, Rubber Cords, Oil Seals, Anti Vibration Rubber Pads etc.

F. C. Gaskets

F.C. Gaskets are designed for Jiffy Collar Coupling and made out of NR, SBR, EPDM Polymers. Gaskets are a vailable in all standard sizes from 80 mm to 1000 mm dia NB.

Flat Rubber Gaskets

Flat Rubber Gaskets (of 3/6mm duel thickness) are designed to make Flanged Joints and are made out of NR, SBR, EPDM Polymers. The thickness around sealing area is kept at 6 mm to account for possible machining irregularities on mating Flanges. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

LRC Gaskets

LRC Gaskets are designed for use in Jiffy Socket Leak Repair Clamps and are specially designed to facilitate permanent repair of leakages in Socket / Spigot Joints in Pipes and Fittings. The Gaskets are normally made out of EPDM Polymer and can also be made out other Polymers. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Modified J - II Gaskets

Modified J – II Gaskets are designed for Jiffy II M/J Fittings and are made out of EPDM Polymer. This Gasket used in pipe-fittings industries. Gaskets are available in all standard sizes from 80 mm to 300 mm dia NB.

Rubber Gasket for M.J Joints

These conical shaped M/J Rubber Gaskets are designed for use in Mechanical Joint pipe fittings and are manufactured out of EPDM Polymer. The Gaskets are interchangeable and are available in all standard sizes from 80 mm dia to 1000 mm dia NB.

Rubber Gasket for Push-on Joints (T-Joint)

Rubber Gaskets for Push on Joint (Tyton Gasket) are made out of NR, SBR, EPDM Polymer and are suitable for jointing Tyton Joint C.I. / D.I. Pipes. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Sealing O Rings

Rubber O Rings made out of NR, SBR, EPDM, . These Gaskets are used in C.I. ‘D’ Joints A.C. Pipes and RCC pressure pipes. Gaskets are available in all standard sizes from 80 mm to 2000 mm dia NB.


Additional Information:
  • Item Code: SANDHYAFLEXRG
  • Production Capacity: 50 number
  • Delivery Time: 7 days
  • Packaging Details: Packing in HDPE Bag
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • EPDM Tyton Rubber Gasket
  • EPDM Tyton Rubber Gasket
  • EPDM Tyton Rubber Gasket
  • EPDM Tyton Rubber Gasket
  • EPDM Tyton Rubber Gasket
  • EPDM Tyton Rubber Gasket
  • EPDM Tyton Rubber Gasket
  • EPDM Tyton Rubber Gasket
  • EPDM Tyton Rubber Gasket
  • EPDM Tyton Rubber Gasket
  • EPDM Tyton Rubber Gasket
  • EPDM Tyton Rubber Gasket
  • EPDM Tyton Rubber Gasket
EPDM Tyton Rubber Gasket
Get Best Quote

EPDM Tyton Rubber Gasket

Approx. Price: Rs 45 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Number
ThicknessAs per customers requirement
ApplicationSealing for pipe Gasket
BrandSandhyaflex
Size80mm to 1000mm
FinishingSmooth
Hardness50/80 Shore A
DiameterAs per customers requirement
ShapeRound
FinishSmooth
WeightAs per customers requirement
Model Name/NumberEPDM Tyton Rubber Gasket
DesignAs per customers requirement
ColorBlack
MaterialEPDM
I Deal InNew Only
We are Manufacturer of Quality EPDM Tyton Rubber Gasket like Push On Joint (Tyton), 'O' Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality. We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them.

Additional Information:
  • Production Capacity: 50 numbers
Yes! I am Interested
Watch Video
Request CallBack
  • Ductile Iron Pipe EPDM Gasket
  • Ductile Iron Pipe EPDM Gasket
  • Ductile Iron Pipe EPDM Gasket
  • Ductile Iron Pipe EPDM Gasket
  • Ductile Iron Pipe EPDM Gasket
  • Ductile Iron Pipe EPDM Gasket
  • Ductile Iron Pipe EPDM Gasket
  • Ductile Iron Pipe EPDM Gasket
  • Ductile Iron Pipe EPDM Gasket
  • Ductile Iron Pipe EPDM Gasket
  • Ductile Iron Pipe EPDM Gasket
  • Ductile Iron Pipe EPDM Gasket
Ductile Iron Pipe EPDM Gasket
Get Best Quote

Ductile Iron Pipe EPDM Gasket

Approx. Price: Rs 1,200 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Number
ThicknessAs per customers requirement
Usage/ApplicationIndustrial
MaterialNeoprene
Type50 /80 Shore A
ApplicationSealing for DI Pipe Gasket
BrandSandhyaflex
ColorBlack
Size80 to 1000 mm
Hardness50/80 Shore A
Weightas per Dimension
Quantity Per Packas per Dimension
Packaging TypePolybag
Shore Hardness50 Shore and 80 Shore A
ShapeRing Gasket
Pressure10Bar
Temperature-10 Deg to 150 Deg C
Outer Diameteras per Drg
I Deal InNew Only
FinishingSmooth
Number Of Holesno
DiameterAs per customers requirement
Product CustomisationYes
Model Name/NumberEPDM Gasket
Specific Gravity1.25
Maximum Ash Content5% Max
Material Grade50/80 Shore A
StyleSoft and Hard Bulb/Leg
Packaging Sizeas dimension
Designas per Drg
Finishsmooth
Tensile Strength11/9 MPa
Density1.25
Cellular StructureEPDM
Item CodeDIPF
Elongation400/125 %
Product TypeDI Pipe Hardness 50/80 Shore A
Country of OriginMade in India
Sandhya Enterprises manufacturer and Supplier of Ductile Iron Pipe EPDM Gasket.

Rubber Gaskets

Manufacturer of Quality DI Pipe Gasket like Push On Joint (Tyton), ‘O’ Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets. All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality. We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them. We also manufacture Glass Separators, Rubber Inserts, Square Gaskets, Rubber Bushes, Rubber Cords, Oil Seals, Anti Vibration Rubber Pads etc.

F. C. Gaskets

F.C. Gaskets are designed for Jiffy Collar Coupling and made out of NR, SBR, EPDM Polymers. Gaskets are a vailable in all standard sizes from 80 mm to 1000 mm dia NB.

Flat Rubber Gaskets

Flat Rubber Gaskets (of 3/6mm duel thickness) are designed to make Flanged Joints and are made out of NR, SBR, EPDM Polymers. The thickness around sealing area is kept at 6 mm to account for possible machining irregularities on mating Flanges. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

LRC Gaskets

LRC Gaskets are designed for use in Jiffy Socket Leak Repair Clamps and are specially designed to facilitate permanent repair of leakages in Socket / Spigot Joints in Pipes and Fittings. The Gaskets are normally made out of EPDM Polymer and can also be made out other Polymers. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Modified J - II Gaskets

Modified J – II Gaskets are designed for Jiffy II M/J Fittings and are made out of EPDM Polymer. This Gasket used in pipe-fittings industries. Gaskets are available in all standard sizes from 80 mm to 300 mm dia NB.

Rubber Gasket for M.J Joints

These conical shaped M/J Rubber Gaskets are designed for use in Mechanical Joint pipe fittings and are manufactured out of EPDM Polymer. The Gaskets are interchangeable and are available in all standard sizes from 80 mm dia to 1000 mm dia NB.

Rubber Gasket for Push-on Joints (T-Joint)

Rubber Gaskets for Push on Joint (Tyton Gasket) are made out of NR, SBR, EPDM Polymer and are suitable for jointing Tyton Joint C.I. / D.I. Pipes. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Sealing O Rings

Rubber O Rings made out of NR, SBR, EPDM, . These Gaskets are used in C.I. ‘D’ Joints A.C. Pipes and RCC pressure pipes. Gaskets are available in all standard sizes from 80 mm to 2000 mm dia NB.


Additional Information:
  • Item Code: DIPG
  • Production Capacity: 50 meters
  • Delivery Time: 7 to 15 days
  • Packaging Details: Packing in HDPE Cover
Yes! I am Interested
Watch Video
Request CallBack
  • Tyton EPDM Gasket IS:5382
  • Tyton EPDM Gasket IS:5382
  • Tyton EPDM Gasket IS:5382
  • Tyton EPDM Gasket IS:5382
  • Tyton EPDM Gasket IS:5382
  • Tyton EPDM Gasket IS:5382
  • Tyton EPDM Gasket IS:5382
  • Tyton EPDM Gasket IS:5382
  • Tyton EPDM Gasket IS:5382
  • Tyton EPDM Gasket IS:5382
  • Tyton EPDM Gasket IS:5382
  • Tyton EPDM Gasket IS:5382
Tyton EPDM Gasket IS:5382
Get Best Quote

Tyton EPDM Gasket IS:5382

Approx. Price: Rs 48 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Number
Usage/ApplicationPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
ThicknessAs per customers requirement
ApplicationSealing for DI pipe Gasket
Type50/80 Shore A
BrandSandhyaflex
ColorBlack
Size80 to 1000 mm
ShapeRound
FinishingSmooth
Hardness50/80 Shore A
DiameterAs per customers requirement
FinishSmooth
Outer DiameterPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
PressurePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Shore Hardness50/80 Shore A
Temperature-10 to 150 Deg C
WeightWeight Depend of Dimension
Product TypePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Model Name/NumberPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Tensile StrengthSl. No Descriptions Specification Bulb Heel 1 Hardness IRHD/Shore A 46 - 55 76-85 2 Tensile st
Packaging SizePacking in HDPE Bag 26"
DesignPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Quantity Per PackDepend of Dimension
Number Of HolesSl. No Descriptions Specification Bulb Heel 1 Hardness IRHD/Shore A 46 - 55 76-85 2 Tensile st
StylePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
ToleranceSl. No Descriptions Specification Bulb Heel 1 Hardness IRHD/Shore A 46 - 55 76-85 2 Tensile st
Oem No.Sl. No Descriptions Specification Bulb Heel 1 Hardness IRHD/Shore A 46 - 55 76-85 2 Tensile st
Is It CustomizedCustomized
MaterialEPDM
I Deal InNew Only
Product CustomisationYes
Material GradePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Sandhya Enterprises manufacturer and Supplier Tyton EPDM Gasket IS:5382.

Rubber Gaskets

Manufacturer of Quality DI Pipe Gasket like Push On Joint (Tyton), ‘O’ Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets. All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality. We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them. We also manufacture Glass Separators, Rubber Inserts, Square Gaskets, Rubber Bushes, Rubber Cords, Oil Seals, Anti Vibration Rubber Pads etc.

F. C. Gaskets

F.C. Gaskets are designed for Jiffy Collar Coupling and made out of NR, SBR, EPDM Polymers. Gaskets are a vailable in all standard sizes from 80 mm to 1000 mm dia NB.

Push On Joint (TYTON) Ring For Ductile Iron Pipe

Push On Joint (Tyton) of Ductile Iron Pipe require Rubber Rings as per ISI:12820 which prescribes the rings as per IS:5382-1985 in dual hardness of Type II & V.

Gasket material in all respect comply with requirements specified in IS 5382 & IS 12820 standard

Gasket is offered in SBR / EPDM / Neoprene / Nitrile

Available Sizes : 80mm to 1200mm / 4" to 24"

·         Excellent performance

·         Longer life

·         Ultra durability

·         Health safety

·         100% Leak proof seal

·         Competitive price & Reliable product

·         Custom Engineered Design

·         The surface area of the pipe to be changed and free from mud, sand, pebbles & frozen materials.

·         Recommended adhesive to be applied in inner surface of Gasket to come into contact with pipe.

·         Adhesive to be applied on the outer surface of the plain end of pipe & alignment of pipes into socket enabling contact with gasket

·         Fit the gasket when the surface is free from foreign particles and clean

·         Use thin coat of adhesive on gasket and plain end of pipe

·         Place the plain end pipe above the ground

 

 

 

 

 

 


Additional Information:
  • Item Code: TYTONGASKET
  • Production Capacity: 200Nos/day
  • Delivery Time: 7 to 15 days
  • Packaging Details: Packing as per dimension and qty
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • EPDM Rubber Tyton Gaskets
  • EPDM Rubber Tyton Gaskets
  • EPDM Rubber Tyton Gaskets
  • EPDM Rubber Tyton Gaskets
  • EPDM Rubber Tyton Gaskets
  • EPDM Rubber Tyton Gaskets
  • EPDM Rubber Tyton Gaskets
  • EPDM Rubber Tyton Gaskets
  • EPDM Rubber Tyton Gaskets
  • EPDM Rubber Tyton Gaskets
  • EPDM Rubber Tyton Gaskets
  • EPDM Rubber Tyton Gaskets
EPDM Rubber Tyton Gaskets
Get Best Quote

EPDM Rubber Tyton Gaskets

Approx. Price: Rs 150 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Number
ThicknessAs per customers requirement
TypeHardness-50 to 80 Shore A
BrandSandhyaflex
ShapeRing Gasket
MaterialRubber
Size80mm to 1000mm
ColorBlack
FinishingSmooth
Cellular Structure100 Deg C
Hardness50/80 Shore A
Packaging TypePacking with HDPE cover
Density1.25
Temperature-10 to 100 Deg C
DiameterDimension as per dimension
DuromaterHardness-50 to 80 Shore A
Elongation125% and 350%
FinishSmooth
Outer DiameterDia
PressurePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Shore Hardness50 to 80 Shore A
Usage/ApplicationPipe Sealing
WeightWeight as per dimension
Product TypeRing Type
Model Name/NumberSANDHYAFLEX-TG
DesignDesign as per Drg
Packaging SizePackaging size ad per Dimension
Quantity Per PackQty depend of Size.
Number Of HolesPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
StylePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
ToleranceSl. No Descriptions Specification Bulb Heel 1 Hardness IRHD/Shore A 46 - 55 76-85 2 Tensile st
Oem No.Push On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Tensile Strength11 MPa
Elongation Percent400%
Is It CustomizedCustomized
I Deal InNew Only
Product CustomisationYes
Material GradeEPDM
Maximum Ash Content5% max
Item CodeSANDHYAFLEXDIPG
Specific Gravity1.25
Country of OriginMade in India
Sandhya Eterprises manufacturer and Supplier  of EPDM Rubber Tyton Gaskets.

Rubber Gaskets

Manufacturer of Quality DI Pipe Gasket like Push On Joint (Tyton), ‘O’ Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets. All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality. We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them. We also manufacture Glass Separators, Rubber Inserts, Square Gaskets, Rubber Bushes, Rubber Cords, Oil Seals, Anti Vibration Rubber Pads etc.

F. C. Gaskets

F.C. Gaskets are designed for Jiffy Collar Coupling and made out of NR, SBR, EPDM Polymers. Gaskets are a vailable in all standard sizes from 80 mm to 1000 mm dia NB.

Flat Rubber Gaskets

Flat Rubber Gaskets (of 3/6mm duel thickness) are designed to make Flanged Joints and are made out of NR, SBR, EPDM Polymers. The thickness around sealing area is kept at 6 mm to account for possible machining irregularities on mating Flanges. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

LRC Gaskets

LRC Gaskets are designed for use in Jiffy Socket Leak Repair Clamps and are specially designed 

Push On Joint (TYTON) Ring For Ductile Iron Pipe

Push On Joint (Tyton) of Ductile Iron Pipe require Rubber Rings as per ISI:12820 which prescribes the rings as per IS:5382-1985 in dual hardness of Type II & V.

Gasket material in all respect comply with requirements specified in IS 5382 & IS 12820 standard

Gasket is offered in SBR / EPDM / Neoprene / Nitrile

Available Sizes : 80mm to 1200mm / 4" to 24"

·         Excellent performance

·         Longer life

·         Ultra durability

·         Health safety

·         100% Leak proof seal

·         Competitive price & Reliable product

·         Custom Engineered Design

·         The surface area of the pipe to be changed and free from mud, sand, pebbles & frozen materials.

·         Recommended adhesive to be applied in inner surface of Gasket to come into contact with pipe.

·         Adhesive to be applied on the outer surface of the plain end of pipe & alignment of pipes into socket enabling contact with gasket

·         Fit the gasket when the surface is free from foreign particles and clean

·         Use thin coat of adhesive on gasket and plain end of pipe

·         Place the plain end pipe above the ground

 

 

 

 

 

 

 

 


Additional Information:
  • Item Code: SANDHYAFLEX-EPDMTG
  • Production Capacity: 500/Day Number
  • Delivery Time: 7 to 15days max
  • Packaging Details: Packing details as per
Yes! I am Interested
Watch Video
Request CallBack
  • Sandhyaflex EPDM Tyton Gasket
  • Sandhyaflex EPDM Tyton Gasket
  • Sandhyaflex EPDM Tyton Gasket
  • Sandhyaflex EPDM Tyton Gasket
  • Sandhyaflex EPDM Tyton Gasket
  • Sandhyaflex EPDM Tyton Gasket
  • Sandhyaflex EPDM Tyton Gasket
  • Sandhyaflex EPDM Tyton Gasket
  • Sandhyaflex EPDM Tyton Gasket
  • Sandhyaflex EPDM Tyton Gasket
  • Sandhyaflex EPDM Tyton Gasket
  • Sandhyaflex EPDM Tyton Gasket
Sandhyaflex EPDM Tyton Gasket
Get Best Quote

Sandhyaflex EPDM Tyton Gasket

Approx. Price: Rs 1,900 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Number
Usage/ApplicationPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Thickness8mm to 35mm
ApplicationRubber Bushes,Rubber Cord,Oil Seals,Anti Vibration Rubber Pads
TypePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
BrandSandhyaflex
ColorBlack
Size80mm to 1000mm
ShapeRound
FinishingSmooth
Hardness50/80 Shore A
Cellular StructurePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Density1.2
Packaging TypePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
DiameterAs per customers requirement
Duromater50/80 Shore A
Elongation400/125 %
FinishSmooth
Outer DiameterPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
PressurePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Shore Hardness50/80 Shore A
Temperature-10 to 150 Deg C
WeightWeight depend of Dimension and qty
Model Name/Numberas per Customer PO and IS Specification
Product TypeEPDM TYTON RUBBER GASKET
Tensile Strength9 and 11 MPa
Packaging SizeHPDE Bag
Quantity Per PackPacking depend of Qty
Is It CustomizedCustomized
MaterialEPDM
I Deal InNew Only
Product CustomisationYes
Material GradeEPDM

Sandhya Enterprises manufacturer and Supplier of Sandhyaflex EPDM Tyton Gasket.

Rubber Gaskets

Manufacturer of Quality DI Pipe Gasket like Push On Joint (Tyton), ‘O’ Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets. All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality. We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them. We also manufacture Glass Separators, Rubber Inserts, Square Gaskets, Rubber Bushes, Rubber Cords, Oil Seals, Anti Vibration Rubber Pads etc.

F. C. Gaskets

F.C. Gaskets are designed for Jiffy Collar Coupling and made out of NR, SBR, EPDM Polymers. Gaskets are a vailable in all standard sizes from 80 mm to 1000 mm dia NB.

Flat Rubber Gaskets

Flat Rubber Gaskets (of 3/6mm duel thickness) are designed to make Flanged Joints and are made out of NR, SBR, EPDM Polymers. The thickness around sealing area is kept at 6 mm to account for possible machining irregularities on mating Flanges. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

LRC Gaskets

LRC Gaskets are designed for use in Jiffy Socket Leak Repair Clamps and are specially designed to facilitate permanent repair .

Push On Joint (TYTON) Ring For Ductile Iron Pipe

Push On Joint (Tyton) of Ductile Iron Pipe require Rubber Rings as per ISI:12820 which prescribes the rings as per IS:5382-1985 in dual hardness of Type II & V.

Gasket material in all respect comply with requirements specified in IS 5382 & IS 12820 standard

Gasket is offered in SBR / EPDM / Neoprene / Nitrile

Available Sizes : 80mm to 1200mm / 4" to 24"

·         Excellent performance

·         Longer life

·         Ultra durability

·         Health safety

·         100% Leak proof seal

·         Competitive price & Reliable product

·         Custom Engineered Design

·         The surface area of the pipe to be changed and free from mud, sand, pebbles & frozen materials.

·         Recommended adhesive to be applied in inner surface of Gasket to come into contact with pipe.

·         Adhesive to be applied on the outer surface of the plain end of pipe & alignment of pipes into socket enabling contact with gasket

·         Fit the gasket when the surface is free from foreign particles and clean

·         Use thin coat of adhesive on gasket and plain end of pipe

·         Place the plain end pipe above the ground

 

 

 

 

 

 


Additional Information:
  • Item Code: POEDMTG-SANDHYAFLEX
  • Production Capacity: 100 Number
  • Delivery Time: 7 to 15 days
  • Packaging Details: Packing in HDPE Bag
Yes! I am Interested
Watch Video
Request CallBack
  • DWC Pipe Gasket
  • DWC Pipe Gasket
  • DWC Pipe Gasket
  • DWC Pipe Gasket
  • DWC Pipe Gasket
  • DWC Pipe Gasket
  • DWC Pipe Gasket
  • DWC Pipe Gasket
  • DWC Pipe Gasket
DWC Pipe Gasket
Get Best Quote

DWC Pipe Gasket

Approx. Price: Rs 200 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Number
ThicknessAs per customers requirement
ColorBlack
Size125mm to 300mm
ShapeRound
Tensile Strength11/9 MPa
Elongation400%
MaterialRubber
BrandSandhyaflex
Sandhya Enterprises manufacturer and suppliers of DWC Pipe Gasket. We are engaged in offering wide range of Rubber Gasket Seal. These product are made of fine quality raw material under the supervision of well trained and experienced professional experts. These product are easily available at a very competitive market price.

Additional Information:
  • Item Code: SANDHYAFLEX_DWCRR
  • Production Capacity: 50 Numbers
  • Delivery Time: 7 to 15 days max.
  • Packaging Details: Packing in HDPE Bag
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • EPDM DI Pipe Gasket
  • EPDM DI Pipe Gasket
  • EPDM DI Pipe Gasket
  • EPDM DI Pipe Gasket
  • EPDM DI Pipe Gasket
  • EPDM DI Pipe Gasket
  • EPDM DI Pipe Gasket
  • EPDM DI Pipe Gasket
EPDM DI Pipe Gasket
Get Best Quote

EPDM DI Pipe Gasket

Approx. Price: Rs 132 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
Usage/ApplicationIndustrial
Thicknessas per Drg
TypeType 3 and Type 5
BrandSandhyaflex
ShapeRing Gasket
MaterialEPDM
SizeBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
ColorBlack
FinishingSmooth
Cellular StructureBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
Hardness50 and 80 Shore A
Packaging TypePacking in HDPE Bag
Density1.2
DiameterBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
DuromaterBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
Elongation125 and 400% Min
FinishSmooth
Outer DiameterBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
PressureBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
Shore Hardness50 and 80 Shore A
Temperature-10 to 150Deg C
WeightWeight as per dimension
Product TypeBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
Model Name/NumberBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
Tensile Strength9MPa and 11..0MPa
Packaging SizePacking in HDPE Bag 26"
DesignBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
Quantity Per Packpacking qty depend of Dimension
Number Of HolesBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
StyleBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
ToleranceBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
Oem No.BUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
Is It CustomizedCustomized
I Deal InNew Only
Product CustomisationYes
Operating PressureBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
Material GradeBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
DimensionBUSINESS POLICY Inquiry Quotation Purchase Order 1. Billing Address. 2. Delivery Address
Sandhya Enterprises manufacturer and Supplier of EPDM DI Pipe Gasket.Push On Joint (TYTON) Ring For Ductile Iron Pipe

Push On Joint (Tyton) of Ductile Iron Pipe require Rubber Rings as per ISI:12820 which prescribes the rings as per IS:5382-1985 in dual hardness of Type II & V.

Gasket material in all respect comply with requirements specified in IS 5382 & IS 12820 standard

Gasket is offered in SBR / EPDM / Neoprene / Nitrile

Available Sizes : 80mm to 1200mm / 4" to 24"

·         Excellent performance

·         Longer life

·         Ultra durability

·         Health safety

·         100% Leak proof seal

·         Competitive price & Reliable product

·         Custom Engineered Design

·         The surface area of the pipe to be changed and free from mud, sand, pebbles & frozen materials.

·         Recommended adhesive to be applied in inner surface of Gasket to come into contact with pipe.

·         Adhesive to be applied on the outer surface of the plain end of pipe & alignment of pipes into socket enabling contact with gasket

·         Fit the gasket when the surface is free from foreign particles and clean

·         Use thin coat of adhesive on gasket and plain end of pipe

·         Place the plain end pipe above the groundBUSINESS POLICY

Inquiry

Quotation

Purchase Order

1.      Billing Address.            2. Delivery Address          3. GST No                         4. Contact No

                                     Performa Invoice

Advance Payment

Take in Production as per Purchase Order

After Completed Consignment Inform to Client for Balance Payment

Dispatch the Material

Provide LR Copy

 

 


Additional Information:
  • Item Code: EPDMTG
  • Production Capacity: 1000Nos/day
  • Delivery Time: 7 to 15 days max
  • Packaging Details: Packing in HDPE Bag
Yes! I am Interested
Watch Video
Request CallBack
  • Sandhyaflex EPDM TYTON Rubber Gasket
  • Sandhyaflex EPDM TYTON Rubber Gasket
  • Sandhyaflex EPDM TYTON Rubber Gasket
  • Sandhyaflex EPDM TYTON Rubber Gasket
  • Sandhyaflex EPDM TYTON Rubber Gasket
  • Sandhyaflex EPDM TYTON Rubber Gasket
  • Sandhyaflex EPDM TYTON Rubber Gasket
  • Sandhyaflex EPDM TYTON Rubber Gasket
  • Sandhyaflex EPDM TYTON Rubber Gasket
Sandhyaflex EPDM TYTON Rubber Gasket
Get Best Quote

Sandhyaflex EPDM TYTON Rubber Gasket

Approx. Price: Rs 145 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Number
Usage/ApplicationPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Type50/80 shore A
ApplicationSealing for DI Pipe
BrandSandhyaflex
Thickness3-8 mm
Size80mm to 1000mm
Packaging TypePolybag
MaterialRubber
ShapeRing Gasket
FinishingSmooth
Cellular StructurePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
ColorBlack
Density1.2
DiameterAs per customers requirement
DuromaterPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Elongation400/125 %
Finishsmooth
Hardness50/80 Shore A
Outer DiameterPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
PressurePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Shore Hardness50 Shore A and 80 Shore A
Temperature-10 to 100 degree c
WeightAs per customers requirement
Product TypePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Model Name/NumberEPDM TYTON GASKET
Tensile Strength11 MPa for 50 and 9 MPa for 80 Shore A
DesignPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Packaging SizePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Quantity Per PackPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Number Of HolesPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
StylePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
TolerancePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Oem No.Push On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Is It CustomizedCustomized
I Deal InNew Only
Product CustomisationYes
Material GradePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Country of OriginMade in India
Sandhya Enterprises Manufacturer and Supplier of Coupling Rubber Gasket as per customer requiremnet.

Rubber Gaskets

Manufacturer of Quality DI Pipe Gasket like Push On Joint (Tyton), O Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets. All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality. We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them. We also manufacture Glass Separators, Rubber Inserts, Square Gaskets, Rubber Bushes, Rubber Cords, Oil Seals, Anti Vibration Rubber Pads etc.

F. C. Gaskets

F.C. Gaskets are designed for Jiffy Collar Coupling and made out of NR, SBR, EPDM Polymers. Gaskets are a vailable in all standard sizes from 80 mm to 1000 mm dia NB.

Flat Rubber Gaskets

Flat Rubber Gaskets (of 3/6mm duel thickness) are designed to make Flanged Joints and are made out of NR, SBR, EPDM Polymers. The thickness around sealing area is kept at 6 mm to account for possible machining irregularities on mating Flanges. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

LRC Gaskets

LRC Gaskets are designed for use in Jiffy Socket Leak Repair Clamps and are specially designed to facilitate permanent repair of leakages in Socket / Spigot Joints in Pipes and Fittings. The Gaskets are normally made out of EPDM Polymer and can also be made out other Polymers. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Modified J - II Gaskets

Modified J  II Gaskets are designed for Jiffy II M/J Fittings and are made out of EPDM Polymer. This Gasket used in pipe-fittings industries. Gaskets are available in all standard sizes from 80 mm to 300 mm dia NB.

Rubber Gasket for M.J Joints

These conical shaped M/J Rubber Gaskets are designed for use in Mechanical Joint pipe fittings and are manufactured out of EPDM Polymer. The Gaskets are interchangeable and are available in all standard sizes from 80 mm dia to 1000 mm dia NB.

Rubber Gasket for Push-on Joints (T-Joint)

Rubber Gaskets for Push on Joint (Tyton Gasket) are made out of NR, SBR, EPDM Polymer and are suitable for jointing Tyton Joint C.I. / D.I. Pipes. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Sealing O Rings

Rubber O Rings made out of NR, SBR, EPDM, . These Gaskets are used in C.I. D Joints A.C. Pipes and RCC pressure pipes. Gaskets are available in all standard sizes from 80 mm to 2000 mm dia NB.


Additional Information:
  • Item Code: DIPRR-SANDHYAFLEX
  • Production Capacity: 100 numbvers
  • Delivery Time: 7 to 15 days
  • Packaging Details: Packing with HDPE Bag
Yes! I am Interested
Watch Video
Request CallBack
  • Sandhyaflex GRP EPDM Rubber Gasket
  • Sandhyaflex GRP EPDM Rubber Gasket
  • Sandhyaflex GRP EPDM Rubber Gasket
  • Sandhyaflex GRP EPDM Rubber Gasket
  • Sandhyaflex GRP EPDM Rubber Gasket
  • Sandhyaflex GRP EPDM Rubber Gasket
  • Sandhyaflex GRP EPDM Rubber Gasket
  • Sandhyaflex GRP EPDM Rubber Gasket
  • Sandhyaflex GRP EPDM Rubber Gasket
  • Sandhyaflex GRP EPDM Rubber Gasket
  • Sandhyaflex GRP EPDM Rubber Gasket
  • Sandhyaflex GRP EPDM Rubber Gasket
Sandhyaflex GRP EPDM Rubber Gasket
Get Best Quote

Sandhyaflex GRP EPDM Rubber Gasket

Approx. Price: Rs 155 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Piece
Usage/ApplicationEPDM Reka Rings- SANDHYA ENTERPRISES manufactures an exhaustive range of EPDM pipe seals for GRP pip
ThicknessAs per customers requirement
ApplicationSealing for pipe Gasket
TypeSr.No. ND(mm) DAG (mm)+0.5% Ig (mm)+0.5% I (mm) Eg(mm)+0.4 g(mm) Price(Rs) 1 100 136 15 5 16 5 144
BrandSandhyaflex
SizeAs per customers requirement
FinishingSmooth
HardnessSr.No. Description Specified 1 Physical Properties Before Ageing a Hardness 60+5/-4 IRHD b Tensile
Packaging Typepacking in HDPE Bag
DiameterSr.No. ND(mm) DAG (mm)+0.5% Ig (mm)+0.5% I (mm) Eg(mm)+0.4 g(mm) Price(Rs) 1 100 136 15 5 16 5 144
ShapeRound
FinishSmooth
WeightAs per customers requirement
Model Name/NumberEPDM Rubber Gasket
Tensile Strength11 MPa
ColorBlack
MaterialEPDM
Country of OriginMade in India

Sr.No.

ND(mm)

DAG (mm)+0.5%

Ig (mm)+0.5%

I (mm)

Eg(mm)+0.4

g(mm)

Price(Rs)

1

100

136

15

5

16

5

144

2

150

188

15

5

16

5

190

3

200

244

20

5

18

5

200

4

250

298

20

5

18

5

218

5

300

352

20

5

18

5

230

6

350

406

20

5

18

5

247

7

400

460

20

5

18

5

253

8

450

514

20

5

18

5

260


Additional Information:
  • Item Code: GRPEPDMG-SANDYAFLEX
  • Production Capacity: 100 piece
  • Delivery Time: 10 to 25 days
  • Packaging Details: Packing in HDPE Bag
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Sandhyaflex Black EPDM TYTON Gasket
  • Sandhyaflex Black EPDM TYTON Gasket
  • Sandhyaflex Black EPDM TYTON Gasket
  • Sandhyaflex Black EPDM TYTON Gasket
  • Sandhyaflex Black EPDM TYTON Gasket
  • Sandhyaflex Black EPDM TYTON Gasket
  • Sandhyaflex Black EPDM TYTON Gasket
  • Sandhyaflex Black EPDM TYTON Gasket
  • Sandhyaflex Black EPDM TYTON Gasket
  • Sandhyaflex Black EPDM TYTON Gasket
  • Sandhyaflex Black EPDM TYTON Gasket
  • Sandhyaflex Black EPDM TYTON Gasket
Sandhyaflex Black EPDM TYTON Gasket
Get Best Quote

Sandhyaflex Black EPDM TYTON Gasket

Approx. Price: Rs 95 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Number
Usage/ApplicationPHYSICAL TEST REPORT OF TYTON RUBBER GASKET(BULB)& (HEEL) Sl. No Descriptions Specification Bu
TypePHYSICAL TEST REPORT OF TYTON RUBBER GASKET(BULB)& (HEEL) Sl. No Descriptions Specification Bu
ApplicationSealing for DI Pipe
MaterialRubber
ColorBlack
Size120 to 1000 mm
Thickness8mm to 25mm
FinishingSmooth
ShapeCircle
HardnessPHYSICAL TEST REPORT OF TYTON RUBBER GASKET(BULB)& (HEEL) Sl. No Descriptions Specification Bu
Packaging TypePacking in HDPE Bag
Duromater50/80 Shore A
Elongation400/125 %
BrandSandhyaflex
Country of OriginMade in India

 

PHYSICAL TEST REPORT OF TYTON RUBBER GASKET(BULB)& (HEEL)

 

Sl. No

Descriptions

Specification

 

 

 

Bulb

Heel

1

Hardness IRHD/Shore A

46 - 55

76-85

2

Tensile strength Mpa

11 min

9min

3

Elongation @ Break%

400 min

125 min

4

Compression Test

 

 

a

at 700C for 24 hrs

25%max

25%max

b

at 250C for 72 hrs

12%max

15%max

c

at -100C for 72 hrs

40% max

60% max

5

Ageing at 700C for 168 hrs

 

 

a

Change in hardness

  -5 to +8

  -5 to +8

b

Change in Tensile strength

±20%

±20%

c

Change in EB%

  -30 to +10%

  -30 to +10%

 


Additional Information:
  • Item Code: SANDHYAFLEX-DIPG
  • Production Capacity: 100 numbers
  • Delivery Time: 7 to 15 days
  • Packaging Details: Packing in HDPE Bag
Yes! I am Interested
Watch Video
Request CallBack
  • Elastomeric DI Pipe Gasket
  • Elastomeric DI Pipe Gasket
  • Elastomeric DI Pipe Gasket
  • Elastomeric DI Pipe Gasket
  • Elastomeric DI Pipe Gasket
  • Elastomeric DI Pipe Gasket
  • Elastomeric DI Pipe Gasket
  • Elastomeric DI Pipe Gasket
  • Elastomeric DI Pipe Gasket
  • Elastomeric DI Pipe Gasket
  • Elastomeric DI Pipe Gasket
Elastomeric DI Pipe Gasket
Get Best Quote

Elastomeric DI Pipe Gasket

Approx. Price: Rs 40 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Number
Usage/ApplicationPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
ThicknessAs per customers requirement
ApplicationDI and CI Pipe Gasket
ColorBlack
Size100 to 1000 mm
ShapeRound
Cellular StructurePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Density1.2
Hardness50/80 Shore A
Diameter80mm to 1200mm
DuromaterPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
FinishSmooth
Outer DiameterPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
PressurePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Shore Hardness50/80 Shore A
Temperature-10 to 150 Deg C
WeightWeight depend of Dimension
Model Name/NumberPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Product TypePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Packaging SizePacking size depend of Dimension and Qty
DesignPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Quantity Per PackS.No Sizemm Description Images 1 80 Size Packing Qty in on Bag 80mm 125 2 100
Number Of HolesPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
StylePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
ToleranceS.No Sizemm Description Images 1 80 Size Packing Qty in on Bag 80mm 125 2 100
Oem No.Push On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Tensile Strength11/9 MPa
Elongation400/125 %
MaterialRubber
BrandSandhyaflex
Packaging TypeS.No Sizemm Description Images 1 80 Size Packing Qty in on Bag 80mm 125 2 100
Material GradeS.No Sizemm Description Images 1 80 Size Packing Qty in on Bag 80mm 125 2 100
Elastomeric DI Pipe Gasket:
  • Manufacturer of Quality Rubber Gaskets like Push On Joint (Tyton), ‘O’ Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets.
  • All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality.
  • 7

    300

    Size        Packing Qty in on Bag

    300mm    30

     

     

     

     

     

    8

    350

    Size        Packing Qty in on Bag

    350mm     30

     

     

    9

    400

    Size        Packing Qty in on Bag

    350mm     20

     

              

     

     

     

    10

    450

    Size        Packing Qty in on Bag

    450mm     20

    11

    500

    Size        Packing Qty in on Bag

    500mm     15

     

    12

    600

    Size        Packing Qty in on Bag

    600mm     10

     

    13

    700

    Size        Packing Qty in on Bag

    700mm     7

     

    14

    750

    Size        Packing Qty in on Bag

    750mm     7

               


Additional Information:
  • Item Code: DIPR-SANHDYAFLEX
  • Production Capacity: 100 number
  • Delivery Time: 7 to 15 days
  • Packaging Details: Packing in HDPE Bag
Yes! I am Interested
Watch Video
Request CallBack
  • EPDM Tyton Ring Gasket
  • EPDM Tyton Ring Gasket
  • EPDM Tyton Ring Gasket
  • EPDM Tyton Ring Gasket
  • EPDM Tyton Ring Gasket
  • EPDM Tyton Ring Gasket
  • EPDM Tyton Ring Gasket
  • EPDM Tyton Ring Gasket
  • EPDM Tyton Ring Gasket
  • EPDM Tyton Ring Gasket
EPDM Tyton Ring Gasket
Get Best Quote

EPDM Tyton Ring Gasket

Approx. Price: Rs 40 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Number
Usage/ApplicationWater
ThicknessAs per customers requirement
TypeRing Type
BrandSandhyaflex
Size80mm to 1000mm
FinishingSmooth
Hardness50/80 Shore A
Packaging TypePacking in HDPE Bag
Designdesign as per Company Drg
Temperature100 Deg C
ShapeRing Gasket
Product TypeHardness 50 and 80 Shore A
PressureS.No Sizemm Description Images 1 80 Size Packing Qty in on Bag 80mm 125 2 100 Siz
RangeS.No Sizemm Description Images 1 80 Size Packing Qty in on Bag 80mm 125 2 100 Siz
Number Of HolesS.No Sizemm Description Images 1 80 Size Packing Qty in on Bag 80mm 125 2 100 Siz
DiameterS.No Sizemm Description Images 1 80 Size Packing Qty in on Bag 80mm 125 2 100 Siz
WeightWeight depend of Dimension
Product CodeEPDM TYTON GASKET
I Deal InNew Only
Tensile Strength11/9MPa
ColorBlack
Elongation Percent400.125%
MaterialEPDM

S.No

Sizemm

Description

Images

1

80

Size        Packing Qty in on Bag

80mm     125

 

 

 

 

 

2

100

Size        Packing Qty in on Bag

100mm   125

 

 

 

 

 

3

125

Size        Packing Qty in on Bag

125 mm  100

 

 

 

 

 

 

4

150

Size        Packing Qty in on Bag

150mm    100

 

 

5

200

Size        Packing Qty in on Bag

200mm    50

 

 

 

 

 

 

 

 

 

 

6

250

Size        Packing Qty in on Bag

250mm    40

 

 

 

 



Additional Information:
  • Item Code: EPDMTG-SADHHAFLEX
  • Production Capacity: 50 number
  • Delivery Time: 7 to 15 days
  • Packaging Details: Packing in HDPE Bag
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Double Wall Corrugated Rubber Gasket
  • Double Wall Corrugated Rubber Gasket
  • Double Wall Corrugated Rubber Gasket
  • Double Wall Corrugated Rubber Gasket
  • Double Wall Corrugated Rubber Gasket
  • Double Wall Corrugated Rubber Gasket
  • Double Wall Corrugated Rubber Gasket
  • Double Wall Corrugated Rubber Gasket
  • Double Wall Corrugated Rubber Gasket
  • Double Wall Corrugated Rubber Gasket
  • Double Wall Corrugated Rubber Gasket
  • Double Wall Corrugated Rubber Gasket
  • Double Wall Corrugated Rubber Gasket
Double Wall Corrugated Rubber Gasket
Get Best Quote

Double Wall Corrugated Rubber Gasket

Approx. Price: Rs 100 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Number
ThicknessAs per customers requirement
ApplicationSealing for DWC Pipe
BrandSandhyaflex
MaterialRubber
Size150 to 300 mm
ColorBlack
DiameterAs per customers requirement
Elongation400%
FinishSmooth
Temperature-10 Deg to 150 Deg C
WeightAs per customers requirement
Sandhya Enterprises Manufacturer and Supplear of Double Wall Corrugated Rubber Gasket.

Rubber Gaskets

Manufacturer of Quality DI Pipe Gasket like Push On Joint (Tyton), ‘O’ Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets. All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality. We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them. We also manufacture Glass Separators, Rubber Inserts, Square Gaskets, Rubber Bushes, Rubber Cords, Oil Seals, Anti Vibration Rubber Pads etc.

F. C. Gaskets

F.C. Gaskets are designed for Jiffy Collar Coupling and made out of NR, SBR, EPDM Polymers. Gaskets are a vailable in all standard sizes from 80 mm to 1000 mm dia NB.

Flat Rubber Gaskets

Flat Rubber Gaskets (of 3/6mm duel thickness) are designed to make Flanged Joints and are made out of NR, SBR, EPDM Polymers. The thickness around sealing area is kept at 6 mm to account for possible machining irregularities on mating Flanges. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

LRC Gaskets

LRC Gaskets are designed for use in Jiffy Socket Leak Repair Clamps and are specially designed to facilitate permanent repair of leakages in Socket / Spigot Joints in Pipes and Fittings. The Gaskets are normally made out of EPDM Polymer and can also be made out other Polymers. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Modified J - II Gaskets

Modified J – II Gaskets are designed for Jiffy II M/J Fittings and are made out of EPDM Polymer. This Gasket used in pipe-fittings industries. Gaskets are available in all standard sizes from 80 mm to 300 mm dia NB.

Rubber Gasket for M.J Joints

These conical shaped M/J Rubber Gaskets are designed for use in Mechanical Joint pipe fittings and are manufactured out of EPDM Polymer. The Gaskets are interchangeable and are available in all standard sizes from 80 mm dia to 1000 mm dia NB.

Rubber Gasket for Push-on Joints (T-Joint)

Rubber Gaskets for Push on Joint (Tyton Gasket) are made out of NR, SBR, EPDM Polymer and are suitable for jointing Tyton Joint C.I. / D.I. Pipes. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Sealing O Rings

Rubber O Rings made out of NR, SBR, EPDM, . These Gaskets are used in C.I. ‘D’ Joints A.C. Pipes and RCC pressure pipes. Gaskets are available in all standard sizes from 80 mm to 2000 mm dia NB. 

Bank Details

COMPANY NAME

SANDHYA FLEX RUBBERS & PVC PRODUCTS

Bank

HDFC Bank Ltd

Branch

5-80,HMT Road,Chintal, Jeedimetla,Qutubulapur Mandal Dist. R R ,Hyderabad-500054 Telangana

Account No

50200048046980

IFSC

HDFC0001041

PAN No

AMPPC8374G

GST N0

36AMPPC8374G1ZP


Additional Information:
  • Item Code: SANDHYAFLEX_RG
  • Production Capacity: 100 Numbers
  • Delivery Time: 7days-15days
  • Packaging Details: Packing as per Dimension and Qty
Yes! I am Interested
Watch Video
Request CallBack
  • EPDM Tyton Gasket
  • EPDM Tyton Gasket
  • EPDM Tyton Gasket
  • EPDM Tyton Gasket
  • EPDM Tyton Gasket
  • EPDM Tyton Gasket
  • EPDM Tyton Gasket
  • EPDM Tyton Gasket
  • EPDM Tyton Gasket
  • EPDM Tyton Gasket
  • EPDM Tyton Gasket
  • EPDM Tyton Gasket
  • EPDM Tyton Gasket
EPDM Tyton Gasket
Get Best Quote

EPDM Tyton Gasket

Approx. Price: Rs 75 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity250 Piece
MaterialEPDM
Thickness6 mm
BrandSandhyaflex
Size80 mm to 1000 mm
Hardness50/80 Shore A
ColorBlack
Sandhya Enterprises s a Manufacturer and Supplier of EPDM Tyton Gasket.

Rubber Gaskets:
  • Manufacturer of Quality Rubber Gaskets like Push On Joint (Tyton), ‘O’ Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets.
  • All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality.
  • We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them.
  • We also manufacture Glass Separators, Rubber Inserts, Square Gaskets, Rubber Bushes, Rubber Cords, Oil Seals, Anti Vibration Rubber Pads etc.

F. C. Gaskets:
  • F.C. Gaskets are designed for Jiffy Collar Coupling and made out of NR, SBR, EPDM Polymers.
  • Gaskets are a vailable in all standard

Flat Rubber Gaskets:
  • Flat Rubber Gaskets (of 3/6mm duel thickness) are designed to make Flanged Joints and are made out of NR, SBR, EPDM Polymers.
  • The thickness around sealing area is kept at 6 mm to account for possible machining irregularities on mating Flanges. Gaskets are available in all standard

LRC Gaskets:
  • LRC Gaskets are designed for use in Jiffy Socket Leak Repair Clamps and are specially designed to facilitate permanent repair of leakages in Socket / Spigot Joints in Pipes and Fittings. The Gaskets are normally made out of EPDM Polymer and can also be made out other Polymers

Modified J - II Gaskets:
  • Modified J – II Gaskets are designed for Jiffy II M/J Fittings and are made out of EPDM Polymer.
  • This Gasket used in pipe-fittings industries.
  • Gaskets are available in all standard

Rubber Gasket for M.J Joints:
  • These conical shaped M/J Rubber Gaskets are designed for use in Mechanical Joint pipe fittings and are manufactured out of EPDM Polymer. The Gaskets are interchangeable

Rubber Gasket for Push-on Joints (T-Joint):
  • Rubber Gaskets for Push on Joint (Tyton Gasket) are made out of NR, SBR, EPDM Polymer and are suitable for jointing Tyton Joint C.I. / D.I. Pipes.

Sealing O Rings:
  • Rubber O Rings made out of NR, SBR, EPDM
  • These Gaskets are used in C.I. ‘D’ Joints A.C. Pipes and RCC pressure pipes. Gaskets

Yes! I am Interested
Watch Video
Request CallBack
  • SWR Pipe Rubber Gasket
  • SWR Pipe Rubber Gasket
  • SWR Pipe Rubber Gasket
  • SWR Pipe Rubber Gasket
  • SWR Pipe Rubber Gasket
  • SWR Pipe Rubber Gasket
  • SWR Pipe Rubber Gasket
  • SWR Pipe Rubber Gasket
  • SWR Pipe Rubber Gasket
SWR Pipe Rubber Gasket
Get Best Quote

SWR Pipe Rubber Gasket

Approx. Price: Rs 14 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity150 Number
Usage/ApplicationIndustrial
ThicknessSr.No Size mm Tolerance Wall Thickness A mm Wall Thickness Bmm min Max min Max 1 50 +0.3mm 1
SizeSr.No Size mm Tolerance Wall Thickness A mm Wall Thickness Bmm min Max min Max 1 50 +0.3mm 1
ShapeRound
Packaging Type100Nos /PKD
Operating Pressure10Bar
DiameterA Sr.No Size mm Tolerance Wall Thickness A mm Wall Thickness Bmm min Max min Max 1 50 +0.3mm
Design10Bar
Operating Temp100 to 150 Deg C
Temperature-10 to 40Deg C
Product Type2000Nos/Day
Operating Temp.Sr.No. Description Specified 1 Physical Properties Before Ageing a Hardness 60+5/-4 IRHD b Tensile
I Deal InNew Only
Tolerance+.5%/-0.5% max
Pressure10 Bar
Range100mm to 250nn
FeaturesSWR Tight Fit Rings for PVC Pipes & Fittings Our organization is known Exporter,Manufacturer & Supp
Material GradeEPDM
Model Name/NumberSWRRR-SANDHYAFLEX
Tensile Strength12MPa
Surface Finishsmooth type
ColorBlack and Off White
MaterialEPDM Rubber
BrandSandhyaflex
Country of OriginMade in India
HardnessSr.No. Description Specified 1 Physical Properties Before Ageing a Hardness 60+5/-4 IRHD b Tensile
SWR Tight Fit Rings for PVC Pipes & Fittings

Our organization is known Exporter, Manufacturer & Supplier of SWR Tight Fit Rings for PVC Pipes & Fittings in Hyderabad Telanagana. SWR Pipes are generally Range 75 MM to 160 MM. The said pipes require standard quality sealing products for leak proof performance. We are dedicatedly involved in providing an excellent quality array of SWR Tight Fit Rings for PVC Pipes And Fittings, for catering the various needs of our clients. In line with client’s diverse requirements, we are involved in providing an optimum quality range of SWR Rubber Ring. utilizing skills of our dexterous workforce, we are manufacturing and supplying a comprehensive assortment of SWR Tight Fit Rings for PVC Pipes And Fittings

 

Place orders with us, timely deliveries of the same are our prime responsibility! Rely on us for premium quality of the products .

Sr.No

Size     mm

Tolerance

Wall Thickness A mm

Wall Thickness B mm

 

min

Max

min

Max

1

50

+0.3mm

1.8

2.2

3.2

3.8

2

63

+0.3mm

1.8

2.2

3.2

3.8

3

75

+0.3mm

1.8

2.2

3.2

3.8

4

90

+0.4mm

1.9

2.3

3.2

3.8

5

110

+0.4mm

2.2

2.7

3.2

3.8

6

 160

+0.5mm

3.2

3.8

4.0

4.6


Additional Information:
  • Item Code: SWRRR-SANDHYAFLEX
  • Production Capacity: 1000Nos/day
  • Delivery Time: 10 to 25 days
  • Packaging Details: 100 Nos /PKD
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Ring Fit Gasket For PVC Pipe
  • Ring Fit Gasket For PVC Pipe
  • Ring Fit Gasket For PVC Pipe
  • Ring Fit Gasket For PVC Pipe
  • Ring Fit Gasket For PVC Pipe
  • Ring Fit Gasket For PVC Pipe
  • Ring Fit Gasket For PVC Pipe
Ring Fit Gasket For PVC Pipe
Get Best Quote

Ring Fit Gasket For PVC Pipe

Approx. Price: Rs 35 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Piece
MaterialEPDM Rubber
Size90mm to 400mm
Thicknessas per dimension
TypeType 3
Hardness60 Shore A
ShapeRound
Temperature70 to 150 Deg C
ColorBlack
Sandhya Enterprises is a Manufacturer and Supplier of Ring Fit Gasket For PVC Pipe.

Additional Information:
  • Item Code: SANDHYAFLEXSWR
  • Production Capacity: 1000Nos/day
  • Delivery Time: 7 to 15 days
  • Packaging Details: Packing in HDPE bag
Yes! I am Interested
Watch Video
Request CallBack
  • Sandhyaflex GRP Reka Gasket
  • Sandhyaflex GRP Reka Gasket
  • Sandhyaflex GRP Reka Gasket
  • Sandhyaflex GRP Reka Gasket
  • Sandhyaflex GRP Reka Gasket
  • Sandhyaflex GRP Reka Gasket
  • Sandhyaflex GRP Reka Gasket
  • Sandhyaflex GRP Reka Gasket
  • Sandhyaflex GRP Reka Gasket
  • Sandhyaflex GRP Reka Gasket
Sandhyaflex GRP Reka Gasket
Get Best Quote

Sandhyaflex GRP Reka Gasket

Approx. Price: Rs 150 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Number
ThicknessPRICE LIST GRP EPDM REKA GASKET Sr.No. ND(mm) DAG (mm)+0.5% Ig (mm)+0.5% I (mm) Eg(mm)+0.4 g(mm
Usage/ApplicationSealing and Jointing for Pipe
BrandSandhyaflex
MaterialRubber
Size100 mm - 2600 mm
Packaging TypePolybag
ShapeCorrugated
Cellular StructurePRICE LIST GRP EPDM REKA GASKET Sr.No. ND(mm) DAG (mm)+0.5% Ig (mm)+0.5% I (mm) Eg(mm)+0.4 g(mm
ColorBlack
Density1.25
DiameterPRICE LIST GRP EPDM REKA GASKET Sr.No. ND(mm) DAG (mm)+0.5% Ig (mm)+0.5% I (mm) Eg(mm)+0.4 g(mm
Duromater60 Shore A
Elongation400%
FinishSmooth
HardnessGRP PIPE EPDM SEALS as per IS:5382 GRP EPDM Reka Rings- SANDHYA ENTERPRISES manufactures an exhausti
Outer DiameterPRICE LIST GRP EPDM REKA GASKET Sr.No. ND(mm) DAG (mm)+0.5% Ig (mm)+0.5% I (mm) Eg(mm)+0.4 g(mm
PressureGRP PIPE EPDM SEALS as per IS:5382 GRP EPDM Reka Rings- SANDHYA ENTERPRISES manufactures an exhausti
Shore HardnessGRP PIPE EPDM SEALS as per IS:5382 GRP EPDM Reka Rings- SANDHYA ENTERPRISES manufactures an exhausti
Temperature70 Deg C
WeightAs per customers requirement
Product TypeGRP PIPE EPDM SEALS as per IS:5382 GRP EPDM Reka Rings- SANDHYA ENTERPRISES manufactures an exhausti
Model Name/NumberGRP REKA Gasket
Tensile Strength11.0 MPa min
Operating Temp.GRP PIPE EPDM SEALS as per IS:5382 GRP EPDM Reka Rings- SANDHYA ENTERPRISES manufactures an exhausti
DesignPRICE LIST GRP EPDM REKA GASKET Sr.No. ND(mm) DAG (mm)+0.5% Ig (mm)+0.5% I (mm) Eg(mm)+0.4 g(mm
Country of OriginMade in India

GRP PIPE EPDM SEALS as per IS:5382 

GRP EPDM Reka Rings- SANDHYA ENTERPRISES manufactures an exhaustive range of EPDM pipe seals for GRP pipes in diameters ranging from 80mm to 4000mm. Our seals are manufactured in various stock elastomeric compounds in compliance with worldwide regulations including WRAS and BSEN 681 The unique lip design of the Reka profile reduces installation time and accommodates change in flow direction and to eliminate permeation. 

Our pipe seals conform to various international specifications such as BS: 2494, DIN 4060, IS 5382, BS EN 681-1 , ASTM F 477, etc. Pipe seals for the Indian Market are approved by the Bureau of Indian Standards and carry the "ISI" mark. 

 

 

 

 

Applications Include : 

·   Potable and Raw Water Supply

·   Sewage Disposal

·   Storm Water Drainage

·   Industrial Effluents

·   Sea Water Processing

 

·         Water transmission and distribution (portable and raw water)

·         Sanitary sewerage collection and outfalls

·         Storm sewers and drainage

·         Sea water intake, outfalls and cooling water lines

·         Industrial effluents

We manufacture the complete range of Reka type sealing gaskets from sizes 100 mm to 4000 mm pipe diameters. All our GRP gaskets meet the requirements and tolerances set by IS:5382, BSEN 681-1,ISO 4633,DIN:4060 in addition to purchase acceptance standards set by customers.

THE REKA GASKET OFFERS THE FOLLOWING BENEFITS :

·         Tight, efficient joints designed to eliminate infiltration and exfiltration.

·         Easy of joining, reducing installation time.

·         Accommodates small changes in line direction without fittings, or differential settlement.

We offer our products all over India. Our large product line, production capabilities, advanced R&D, quality control unit and good financial position help us in meeting the varied requirements of the clients. Our robust infrastructure enables us to enhance the production capacity and customize the product line as per their requirements. We use road transportation mediums to timely deliver our products.

 

 

 

 

 

 

 

 

 

 

 

 

 


Additional Information:
  • Item Code: GRPEPDMRG-SANDHYAFLEX
  • Production Capacity: 500Nos/days
  • Delivery Time: 25 to 30 days
  • Packaging Details: Packing in Bag
Yes! I am Interested
Watch Video
Request CallBack
  • DI Pipe Gasket
  • DI Pipe Gasket
  • DI Pipe Gasket
  • DI Pipe Gasket
  • DI Pipe Gasket
  • DI Pipe Gasket
  • DI Pipe Gasket
  • DI Pipe Gasket
  • DI Pipe Gasket
  • DI Pipe Gasket
  • DI Pipe Gasket
  • DI Pipe Gasket
DI Pipe Gasket
Get Best Quote

DI Pipe Gasket

Approx. Price: Rs 42 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Number
Usage/ApplicationPush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
ColorBlack
Size80mm to 1000mm
Thickness3.4-6.5 mm
ShapeRound
DiameterAs per customers requirement
FinishSmooth
MaterialEPDM
BrandSandhyaflex
Operating PressurePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Packaging TypePush On Joint (TYTON) Ring For Ductile Iron Pipe Push On Joint (Tyton) of Ductile Iron Pipe require
Hardness50 Shore A
Tensile Strength11.0MPa
Elongation at Break400%
Sandhya Enterprises Manufacturer and Supplier of GRP Pipe Gasket.

Rubber Gaskets

Manufacturer of Quality DI Pipe Gasket like Push On Joint (Tyton), ‘O’ Rings for C.I.D. Joints & RCC Spun Pipes, M/J Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets. All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality. We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them. We also manufacture Glass Separators, Rubber Inserts, Square Gaskets, Rubber Bushes, Rubber Cords, Oil Seals, Anti Vibration Rubber Pads etc.

F. C. Gaskets

F.C. Gaskets are designed for Jiffy Collar Coupling and made out of NR, SBR, EPDM Polymers. Gaskets are a vailable in all standard sizes from 80 mm to 1000 mm dia NB.

Flat Rubber Gaskets

Flat Rubber Gaskets (of 3/6mm duel thickness) are designed to make Flanged Joints and are made out of NR, SBR, EPDM Polymers. The thickness around sealing area is kept at 6 mm to account for possible machining irregularities on mating Flanges. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

LRC Gaskets

LRC Gaskets are designed for use in Jiffy Socket Leak Repair Clamps and are specially designed to facilitate permanent repair of leakages in Socket / Spigot Joints in Pipes and Fittings. 

Push On Joint (TYTON) Ring For Ductile Iron Pipe

Push On Joint (Tyton) of Ductile Iron Pipe require Rubber Rings as per ISI:12820 which prescribes the rings as per IS:5382-1985 in dual hardness of Type II & V.

Gasket material in all respect comply with requirements specified in IS 5382 & IS 12820 standard

Gasket is offered in SBR / EPDM / Neoprene / Nitrile

Available Sizes : 80mm to 1200mm / 4" to 24"

·         Excellent performance

·         Longer life

·         Ultra durability

·         Health safety

·         100% Leak proof seal

·         Competitive price & Reliable product

·         Custom Engineered Design

·         The surface area of the pipe to be changed and free from mud, sand, pebbles & frozen materials.

·         Recommended adhesive to be applied in inner surface of Gasket to come into contact with pipe.

·         Adhesive to be applied on the outer surface of the plain end of pipe & alignment of pipes into socket enabling contact with gasket

·         Fit the gasket when the surface is free from foreign particles and clean

·         Use thin coat of adhesive on gasket and plain end of pipe

·         Place the plain end pipe above the ground

 

 

 


Additional Information:
  • Item Code: DIPG-SANDHYAFLEX
  • Production Capacity: 200Nos/days
  • Delivery Time: 7 to 15 days
  • Packaging Details: Packing depend of Size and qty
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Rubber Taper Gasket
  • Rubber Taper Gasket
  • Rubber Taper Gasket
  • Rubber Taper Gasket
  • Rubber Taper Gasket
  • Rubber Taper Gasket
  • Rubber Taper Gasket
  • Rubber Taper Gasket
  • Rubber Taper Gasket
Rubber Taper Gasket
Get Best Quote

Rubber Taper Gasket

Approx. Price: Rs 250 / NumberGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Number
Usage/ApplicationIndustrial
ThicknessAs per customer requirement
ApplicationJointing for Pipe Line
BrandSandhyaflex
MaterialRubber
Size40 to 1200 mm
Packaging TypePolybag
ColorBlack
ShapeRound
Cellular StructureEPDM Rubber
Density1.25
DiameterAs per customers requirement
Duromater60 Shore A
Elongation400%
FinishSmooth
Hardness55 to 65 Shore A
Outer Diameterdepend of size
Pressure10 to 25 Bar
Temperature-10 to 150 Deg C
Tensile Strength10 to 17 MPa

We are a prominent company offers Rubber Taper Gasket.


Features:

  • Heat proof
  • High flexibility
  • High strength

Yes! I am Interested
Watch Video
View More

Explore more products

X