Industrial Rubber Hose

FIRE FIGHTING RUBBER SUCTION HOSE  with Both end Male and Female Coupling               AS PER IS:3549 and IS :902 Specification

Construction:

Lining & Cover:

The Lining and Cover shall be made from a suitable compound and shall be free from air blisters, porosity or any other visible defects.

Reinforcement:

The reinforcement shall be of woven fabric applied 45^o and angle.The woven Fabric shall be well rubberized with a suitable rubber compound.

Spiral Wire:

 The wire used for the helical reinforcement shall be galvanized steel wire as per IS:280-1978.

Sandhya Enterprises manufacturer and supplier of Dust and Air Suction Rubber Hose.

Application: Dust and Air Suction Rubber Hose for conveying sand, shots or other abrasive materials used in ordnance factory, steel fabrication, shipyards, manufacturing workshops, heavy engineering industries, Gas cylinder manufacturing units etc

Lining : Uniform seamless tube of natural/synthetic/blend rubber compound of high tensile strength, excellent abrasion resistance and free from air blister, porosity and other defects

Reinforcement : : Plies of rubber impregnated woven textile or braiding of high strength natural/synthetic fibre.

Cover : Suitable rubber compound of cloth marked finish resistant to abrasion and weather.

Electric Bonding : A strand of copper wire is embedded between the reinforcement plies to provide electrical continuity throughout the length of the hose

Pressures: Type 1 - W. P. 0.7 MPa & B. P. 3.5MPa. Type 2 - W. P. 1.0 MPa & B. P. 5.0MPa

W.P. :Working Pressure, P.P. : Proof Pressure, B.P. : Burst Pressure, 1MPa : 10.2Kgf/Cm2 1Kgf/Cm2 :100KN/m2 Length : Mandrel made hose upto 15 mtr., Yarn braided hose in continues long length.

Application: Fly Ash Rubber Hose,tank, truck, Bulker loading/unloading or in-plant transfer of dry bulk cement, sand, lime, slurry etc., suction or discharge of abrasive materials.

Construction:

Lining : Uniform seamless tube of natural and synthetic blend rubber compound with excellent resistance to abrasion.

Reinforcement : Reinforcement of rubber impregnated woven textile applied on bias at approx.45 degree angle combination with galvanized steel wire

Cover : Corrugated/plain cloth marked outer cover made from natural rubber compound with excellent weather and abrasion resistant.

End Connections : Each Hose Length has soft ends for clamping or can be supplied with different type of nipples, flanges or fittings as per requirement.

Cover: W.P. of 1.0 Mpa & Min. B.P. of 3.0Mpa.

W.P. of 1.5 Mpa & Min. B.P. of 4.5Mpa .

Construction                                         

Application: Water suction rubber hose india is used for suction and delivery of water free from solids and muddy water, in agriculture, domestic works, dam projects and de-watering of general purpose.Paras Rubber Industries is a credible Rubber Hose Pipe manufacturers in India. We offers a wide range of Water suction rubber hose all over the world.

Temperature Range: Continuous: -25°C to +70°C

Construction:

TYPE-1 :

: a) A rubber inner lining of natural/synthetic/ blend rubber compound, free from porosity, air blisters, or any other visible defects.
b) A reinforcement of one or more layers of natural/synthetic fibre or combination there of; applied by a suitable technique.
c) Spiral wire (Galvanized Steel Wire).
d) Abrasion resistant, outer rubber cover corrugated or smooth.

TYPE-2 :

: a) Semi-embedded internal wire.
b) A rubber inner lining.
c) A reinforcement of one or more layers of natural or synthetic fiber or combination thereof, applied by a suitable technique.
d) Abrasion resistant outer rubber cover-corrugated or smooth.
e) An external wire armoring applied in the Corrugation.

End Connections

: Each hose length has soft ends for clamping or can be supplied with built in nipple and flanges on request. 

Our vision emphasizes that the we want to be The Best Finance Company through the world this is goes beyond the simple fact that, as soon global company. Perspiciatis unde omnis iste natus error sit elites voluptatem accu santiumuo doloremque laudatium, totam rem aperiam, eaque ipsa quae ab illomas ilts inventore veritatis et quasi architecto

Mister we could use a man like Herbert Hoover again. Maybe you and me were never meant to be. But baby think of me once in awhile. I'm at WKRP in Cincinnati! Just two good ol' boys Wouldn't change if they could system like a true modern.

We are a manufacturer and supplier of Textile Braided Water Rubber Hose.

APPLICATION:
Rubber Air Hose have numerous in pneumatic industry. Type-I and type- II can be used for various purposes. These houses comes with strength endurance that i need in application related to compresso and pneumatics. These can be used in various types of compressor.

Rubber Air Hose

Conforming to IS:446 / 1987 TYPE 1, 2 & 3

Application: Rubber Air Hose India is used in multiple applications with compressors and other equipments as a pneumatic tools with type 1 & 2. Type 3 hose finds its used in deep excavation operations, mines, dams, wherever drilling is required in hilly and rocky terrains. Rubber Hose India is a credible Rubber Pipe manufacturers in Delhi. We offer a wide range of Rubber Air Hose Pipe all over the world. 
Construction: 

Lining

: Smooth lining of suitable rubber compounds with good oxidation resistance. In addition, for Type 3 hose, lining is resistance to oil mist.

Reinforcement

: Plies of rubber impregnated woven textile or braided high strength natural/synthetic fibre.

Cover

: Smooth/fluted/cloth marked finish, suitable rubber compound resistant to abrasion and weather.

Pressures:

Type 1 for a W.P. 0.7MPa & Min. B.P. 2.8MPa.

Type 2 for a W.P. 1.0MPa & Min. B.P. 4.0MPa.

Type 3 for a W.P. 1.4MPa & Min. B.P. 5.6MPa

Specification:

Sandhya Enterprises AN ISO:9001:2015 Certisfied Companymanufacture, Supplier and Exporter of Textile Braided Rubber Hose as per IS:444 and IS 446 Specification. Working Pressure 10 Bar to 20 Bar max, size:12mm ID to 50MMID and Lenght 10 Mtr to 100 Mtr max, Packing in Coil wth HDPE Cover, Color Balac, Payment Terms 50% Advance with Purchase Order and Balance 50% Before Delivery.

BUSINESS POLICY

SANDHYA ENTERPRISES                                     AN ISO:9001:2015 Certified Company

Inquiry

Quotation

Purchase Order

1.      Billing Address.                            2. Delivery Address                         3. GST No                                4. Contact No

                                     Performa Invoice

Advance Payment

Take in Production as per Purchase Order

After Completed Consignment Inform to Client for Balance Payment

Dispatch the Material

Provide LR CopyWhy are US

* Best Comunication
* Good Responce
*.Good  Price
* Good Quality
* Timely Delivery
*.Good Transport Facility
So why are delay pl contact to SANDHYA ENTERPRISES and  start today your Business with us.

You need durable, long-lasting, and proven quality, and you require a customised solution. We offer a number of mining, slurry and dredge rubber hose solutions for your various needs. With the most durable and customisable hoses and hose bends available, whatever your use case, our hoses help you accomplish the job.

• Fabricated from a range of the finest grades of natural and synthetic rubber compounds, cord materials and fabric
• Annular ring of spring wire helix construction to ensure flexibility and withstand full vacuum pressure during service
• Polyester reinforcement to provide strength and accommodate movement in the line
• Customised to self-floating specifications or supplied with polyurethane floats

• Rock and sand suction
• Minerals separation
• Offshore rock cutter discharge
• Slurry handling
• Hopper bow connection discharge
• Land reclamation

We are a manufacturer and supplier of Steam Rubber Hose.

• Sandhya Enterprises AN ISO:9001;2015 Certified Company is manufacture and Supplier of Bulker Unloading Cement Fly Ash Rubber Hose as per IS:5137:990 Specification: Size:3" ID to 6" ID End Fitting: MS Flange as per ASA 150 # ANSI 16.5 Drilled and DIN Specification. Working Pressure -10 to 15kg/cm2 Color:Black Vaccum:500 to 700hg.
• • Rubber Sandhya Enterprises AN ISO:9001;2015 Certified Company is manufacture Supplier and Exporter of Bulker Cement Unloading Rubber Hose. size:1).3" ID x5Mtr ILG)with Both End MS Flange as per ASA#.
  • • Shock Proof Yes Material Rubber We are offering a wide range ofSilo Bulker Loading and Unloading Fly Ash Rubber Hose 125mmID. Sandhya Enterprises AN ISO:9001: 2015 Ceritified Company. Run by Mr Mithilesh Chaudahry having 20 years Experince in Rubber Hose Industries. Bank Details COMPANY NAME SANDHYA ENTERPRISES Bank HDFC Bank Ltd Branch.
    • • Sandhya Enterprises AN ISO:9001 2015 Certified Company manufacturer and Supplier of Fly Ash Rubber Hose For Bulker Cement Unloading.size:3" ID to 6" ID , Length 15.0Mtr max. Working Pressure 10Bar to 20Bar. Color Black. Top Plain and Corruagted.
      • size:
      • 3"IDx 5Mtr 
      • 4" IDx 5Mtr 
      • 5" ID x 5mtr

A sandblast rubber hose, also known as a sandblasting hose, is a specialized type of hose designed for use in sandblasting or abrasive blasting applications. It is specifically constructed to withstand the high-pressure and abrasive nature of the materials used in the sandblasting process.

Here are some key features and characteristics of a sandblast rubber hose:

1. Construction: Sandblast rubber hoses are typically made from a blend of synthetic rubber compounds that offer excellent resistance to abrasion, wear, and the impact of blasting media. The inner lining is designed to withstand the abrasive particles and ensure smooth flow, while the outer layer provides protection against external damage.

2. Reinforcement: To enhance strength and durability, sandblast hoses are reinforced with multiple layers of high-strength textile or braided synthetic fibers. This reinforcement helps the hose withstand the high pressures generated during sandblasting operations.

3. Size and Diameter: Sandblast rubber hoses come in various sizes and diameters, ranging from small hoses for handheld sandblasters to larger hoses for industrial-scale sandblasting equipment. The choice of hose size depends on factors such as the equipment being used and the desired blasting pressure.

4. Pressure Rating: Sandblast hoses are designed to handle high-pressure applications. They have a specified pressure rating, usually denoted in pounds per square inch (psi) or bar, indicating the maximum pressure they can safely withstand.

5. Couplings and Fittings: Sandblast rubber hoses often come with specialized couplings and fittings to ensure a secure connection to the sandblasting equipment. These couplings are designed to withstand the high pressures and abrasive conditions associated with sandblasting.

When using a sandblast rubber hose, it is essential to follow proper safety precautions, such as wearing appropriate protective gear, maintaining a safe distance from the blasting area, and adhering to equipment manufacturer's guidelines. Regular inspection and maintenance of the hose are also crucial to ensure its integrity and safe operation.

Please note that sandblasting can be a hazardous process, and it's important to follow safety guidelines and regulations to protect yourself and others from potential harm.

A sandblast rubber hose, also known as a sandblasting hose, is a specialized type of hose designed for use in sandblasting or abrasive blasting applications. It is specifically constructed to withstand the high-pressure and abrasive nature of the materials used in the sandblasting process.

Here are some key features and characteristics of a sandblast rubber hose:

1. Construction: Sandblast rubber hoses are typically made from a blend of synthetic rubber compounds that offer excellent resistance to abrasion, wear, and the impact of blasting media. The inner lining is designed to withstand the abrasive particles and ensure smooth flow, while the outer layer provides protection against external damage.

2. Reinforcement: To enhance strength and durability, sandblast hoses are reinforced with multiple layers of high-strength textile or braided synthetic fibers. This reinforcement helps the hose withstand the high pressures generated during sandblasting operations.

3. Size and Diameter: Sandblast rubber hoses come in various sizes and diameters, ranging from small hoses for handheld sandblasters to larger hoses for industrial-scale sandblasting equipment. The choice of hose size depends on factors such as the equipment being used and the desired blasting pressure.

4. Pressure Rating: Sandblast hoses are designed to handle high-pressure applications. They have a specified pressure rating, usually denoted in pounds per square inch (psi) or bar, indicating the maximum pressure they can safely withstand.

5. Couplings and Fittings: Sandblast rubber hoses often come with specialized couplings and fittings to ensure a secure connection to the sandblasting equipment. These couplings are designed to withstand the high pressures and abrasive conditions associated with sandblasting.

When using a sandblast rubber hose, it is essential to follow proper safety precautions, such as wearing appropriate protective gear, maintaining a safe distance from the blasting area, and adhering to equipment manufacturer's guidelines. Regular inspection and maintenance of the hose are also crucial to ensure its integrity and safe operation.

Please note that sandblasting can be a hazardous process, and it's important to follow safety guidelines and regulations to protect yourself and others from potential harm.

Electric Bonding :; A strand of copper wire is embedded between the reinforcement plies to provide electrical continuity throughout the length of the hose

Pressures: Type 1 - W. P. 0.7 MPa & B. P. 3.5MPa. Type 2 - W. P. 1.0 MPa & B. P. 5.0MPa

W.P. :Working Pressure, P.P. : Proof Pressure, B.P. : Burst Pressure, 1MPa : 10.2Kgf/Cm2 1Kgf/Cm2 :100KN/m2 Length : Mandrel made hose upto 15 mtr., Yarn braided hose in continues long length.A sandblasting rubber hose is a specialized type of hose designed for use in sandblasting or abrasive blasting applications. It is specifically designed to withstand the high pressure and abrasive nature of the materials used in sandblasting processes.

Here are some features and characteristics of a typical sandblasting rubber hose:

1. Construction: Sandblasting rubber hoses are typically constructed with a durable inner rubber tube, reinforcement layers, and an outer rubber cover. The inner tube is designed to withstand the abrasive materials and provide a smooth flow for the blasting media. Reinforcement layers, usually made of high-strength synthetic fibers or steel wire, provide strength and resistance to pressure. The outer cover acts as a protective layer against external factors like abrasion, weathering, and impact.

2. Abrasion Resistance: The inner tube and outer cover of a sandblasting rubber hose are engineered to resist abrasion caused by the high-velocity abrasive particles present in sandblasting operations. This abrasion resistance ensures a longer lifespan for the hose, reducing the need for frequent replacements.

3. Pressure Resistance: Sandblasting processes involve high-pressure delivery of abrasive materials, such as sand, grit, or steel shot. A sandblasting rubber hose is designed to withstand these high pressures to ensure the safe and efficient delivery of the blasting media.

4. Flexibility: Despite their robust construction, sandblasting rubber hoses offer flexibility to facilitate ease of movement during blasting operations. This flexibility allows operators to maneuver the hose around the work area without excessive strain or kinking.

5. Static Dissipation: Static electricity can build up during sandblasting processes, which can be hazardous. Some sandblasting rubber hoses are designed with static dissipating properties to prevent static electricity buildup, ensuring operator safety.

6. Couplings and Fittings: Sandblasting rubber hoses often come with specific couplings or fittings that are compatible with sandblasting equipment. These connections ensure a secure and leak-free attachment between the hose and the sandblasting equipment.

It's important to note that different sandblasting applications may require hoses with specific specifications or certifications. When selecting a sandblasting rubber hose, it's essential to consider factors such as the desired hose diameter, length, pressure rating, and compatibility with the abrasive media being used.

Proper maintenance and regular inspection of the sandblasting rubber hose are also crucial to ensure its safe and effective performance over time.

A sandblast rubber hose, also known as a sandblasting hose, is a specialized type of hose designed for use in sandblasting or abrasive blasting applications. It is specifically constructed to withstand the high-pressure and abrasive nature of the materials used in the sandblasting process.

Here are some key features and characteristics of a sandblast rubber hose:

1. Construction: Sandblast rubber hoses are typically made from a blend of synthetic rubber compounds that offer excellent resistance to abrasion, wear, and the impact of blasting media. The inner lining is designed to withstand the abrasive particles and ensure smooth flow, while the outer layer provides protection against external damage.

2. Reinforcement: To enhance strength and durability, sandblast hoses are reinforced with multiple layers of high-strength textile or braided synthetic fibers. This reinforcement helps the hose withstand the high pressures generated during sandblasting operations.

3. Size and Diameter: Sandblast rubber hoses come in various sizes and diameters, ranging from small hoses for handheld sandblasters to larger hoses for industrial-scale sandblasting equipment. The choice of hose size depends on factors such as the equipment being used and the desired blasting pressure.

4. Pressure Rating: Sandblast hoses are designed to handle high-pressure applications. They have a specified pressure rating, usually denoted in pounds per square inch (psi) or bar, indicating the maximum pressure they can safely withstand.

5. Couplings and Fittings: Sandblast rubber hoses often come with specialized couplings and fittings to ensure a secure connection to the sandblasting equipment. These couplings are designed to withstand the high pressures and abrasive conditions associated with sandblasting.

When using a sandblast rubber hose, it is essential to follow proper safety precautions, such as wearing appropriate protective gear, maintaining a safe distance from the blasting area, and adhering to equipment manufacturer's guidelines. Regular inspection and maintenance of the hose are also crucial to ensure its integrity and safe operation.

Please note that sandblasting can be a hazardous process, and it's important to follow safety guidelines and regulations to protect yourself and others from potential harm.

A sandblast rubber hose, also known as a sandblasting hose, is a specialized type of hose designed for use in sandblasting or abrasive blasting applications. It is specifically constructed to withstand the high-pressure and abrasive nature of the materials used in the sandblasting process.

Here are some key features and characteristics of a sandblast rubber hose:

1. Construction: Sandblast rubber hoses are typically made from a blend of synthetic rubber compounds that offer excellent resistance to abrasion, wear, and the impact of blasting media. The inner lining is designed to withstand the abrasive particles and ensure smooth flow, while the outer layer provides protection against external damage.

2. Reinforcement: To enhance strength and durability, sandblast hoses are reinforced with multiple layers of high-strength textile or braided synthetic fibers. This reinforcement helps the hose withstand the high pressures generated during sandblasting operations.

3. Size and Diameter: Sandblast rubber hoses come in various sizes and diameters, ranging from small hoses for handheld sandblasters to larger hoses for industrial-scale sandblasting equipment. The choice of hose size depends on factors such as the equipment being used and the desired blasting pressure.

4. Pressure Rating: Sandblast hoses are designed to handle high-pressure applications. They have a specified pressure rating, usually denoted in pounds per square inch (psi) or bar, indicating the maximum pressure they can safely withstand.

5. Couplings and Fittings: Sandblast rubber hoses often come with specialized couplings and fittings to ensure a secure connection to the sandblasting equipment. These couplings are designed to withstand the high pressures and abrasive conditions associated with sandblasting.

When using a sandblast rubber hose, it is essential to follow proper safety precautions, such as wearing appropriate protective gear, maintaining a safe distance from the blasting area, and adhering to equipment manufacturer's guidelines. Regular inspection and maintenance of the hose are also crucial to ensure its integrity and safe operation.

Please note that sandblasting can be a hazardous process, and it's important to follow safety guidelines and regulations to protect yourself and others from potential harm.

Application:

Sand Blasting Hose for conveying sand, shots or other abrasive materials used in ordnance factory, steel fabrication, shipyards, manufacturing workshops, heavy engineering industries, Gas cylinder manufacturing units etc.

Lining : Uniform seamless tube of natural/synthetic/blend rubber compound of high tensile strength, excellent abrasion resistance and free from air blister, porosity and other defects

Reinforcement : Plies of rubber impregnated woven textile or braiding of high strength natural/synthetic fibre.

Cover : Suitable rubber compound of cloth marked finish resistant to abrasion and weather.

Electric Bonding :; A strand of copper wire is embedded between the reinforcement plies to provide electrical continuity throughout the length of the hose

Pressures: Type 1 - W. P. 0.7 MPa & B. P. 3.5MPa. Type 2 - W. P. 1.0 MPa & B. P. 5.0MPa

W.P. :Working Pressure, P.P. : Proof Pressure, B.P. : Burst Pressure, 1MPa : 10.2Kgf/Cm2 1Kgf/Cm2 :100KN/m2 Length : Mandrel made hose upto 15 mtr., Yarn braided hose in continues long length.

Application:

Sand Blasting Hose for conveying sand, shots or other abrasive materials used in ordnance factory, steel fabrication, shipyards, manufacturing workshops, heavy engineering industries, Gas cylinder manufacturing units etc.

Lining : Uniform seamless tube of natural/synthetic/blend rubber compound of high tensile strength, excellent abrasion resistance and free from air blister, porosity and other defects

Reinforcement : Plies of rubber impregnated woven textile or braiding of high strength natural/synthetic fibre.

Cover : Suitable rubber compound of cloth marked finish resistant to abrasion and weather.

Electric Bonding :; A strand of copper wire is embedded between the reinforcement plies to provide electrical continuity throughout the length of the hose

Pressures: Type 1 - W. P. 0.7 MPa & B. P. 3.5MPa. Type 2 - W. P. 1.0 MPa & B. P. 5.0MPa

W.P. :Working Pressure, P.P. : Proof Pressure, B.P. : Burst Pressure, 1MPa : 10.2Kgf/Cm2 1Kgf/Cm2 :100KN/m2 Length : Mandrel made hose upto 15 mtr., Yarn braided hose in continues long length.

Application:

Sand Blasting Hose for conveying sand, shots or other abrasive materials used in ordnance factory, steel fabrication, shipyards, manufacturing workshops, heavy engineering industries, Gas cylinder manufacturing units etc.

Lining : Uniform seamless tube of natural/synthetic/blend rubber compound of high tensile strength, excellent abrasion resistance and free from air blister, porosity and other defects

Reinforcement : Plies of rubber impregnated woven textile or braiding of high strength natural/synthetic fibre.

Cover : Suitable rubber compound of cloth marked finish resistant to abrasion and weather.

Electric Bonding :; A strand of copper wire is embedded between the reinforcement plies to provide electrical continuity throughout the length of the hose

Pressures: Type 1 - W. P. 0.7 MPa & B. P. 3.5MPa. Type 2 - W. P. 1.0 MPa & B. P. 5.0MPa

W.P. :Working Pressure, P.P. : Proof Pressure, B.P. : Burst Pressure, 1MPa : 10.2Kgf/Cm2 1Kgf/Cm2 :100KN/m2 Length : Mandrel made hose upto 15 mtr., Yarn braided hose in continues long length.