repeat">
Sandhya Enterprises
Sandhya Enterprises
Jeedimetla, Hyderabad, Telangana
GST No. 36GNLPS1299P1ZS
08048977570 92% Response Rate
Send E-mail

Fire Fighting Rubber Suction Hose with Brass

A fire-fighting rubber suction hose with male-female coupling is a specialized hose designed for use in firefighting applications, particularly for drawing water from a water source to supply fire pumps or other firefighting equipment. These hoses are essential for establishing a water supply and are typically used in scenarios where a direct connection to a water source is required. Here are some key features and components:
1. **Material and Construction:**   - The hose is made of durable rubber or a synthetic rubber blend that is resistant to abrasion, weathering, and exposure to various chemicals.   - It may include reinforcement layers such as textile or wire to provide strength and flexibility.
2. **Suction Capability:**   - The hose is designed for suction applications, allowing it to draw water from a water source (like a lake, pond, or hydrant) to supply firefighting equipment.
3. **Couplings:**   - The hose comes with male and female couplings attached to each end. These couplings allow for a secure and quick connection to other hoses or firefighting equipment.   - Male and female couplings ensure compatibility and enable the creation of a continuous water supply line.
4. **Compatibility:**   - The hose and couplings are designed to be compatible with standard firefighting equipment, such as fire pumps, hydrants, and other water supply sources.
5. **Size and Diameter:**   - Firefighting suction hoses come in various sizes and diameters to meet different flow rate requirements and to suit the needs of specific firefighting operations.
6. **Pressure Ratings:**   - The hose is designed to withstand the pressure associated with firefighting applications. The pressure ratings are determined based on the intended use and equipment it will be connected to.
7. **Standards Compliance:**   - Firefighting hoses often comply with industry standards, such as NFPA (National Fire Protection Association) standards, to ensure their performance and safety in firefighting operations.
8. **Visibility:**   - Some hoses may come in bright colors (such as red or yellow) for better visibility in emergency situations.

Request CallBack
  • Fire Fighting Rubber Suction Hose
  • Fire Fighting Rubber Suction Hose
  • Fire Fighting Rubber Suction Hose
  • Fire Fighting Rubber Suction Hose
  • Fire Fighting Rubber Suction Hose
  • Fire Fighting Rubber Suction Hose
  • Fire Fighting Rubber Suction Hose
  • Fire Fighting Rubber Suction Hose
  • Fire Fighting Rubber Suction Hose
  • Fire Fighting Rubber Suction Hose
  • Fire Fighting Rubber Suction Hose
  • Fire Fighting Rubber Suction Hose
  • Fire Fighting Rubber Suction Hose
Fire Fighting Rubber Suction Hose
Get Best Quote

Fire Fighting Rubber Suction Hose

Approx. Price: Rs 18,000 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity3 Piece
Size/Diameter4 inch
TypeSteam Hose
Length6m
ColorBlack
LayersFirefighting rubber suction hoses typically have multiple layers for strength and durability. Common
Packaging TypeFire hoses are often coiled or packed on hose reels or in hose cabinets for easy storage and deploym
PatternThe pattern on a firefighting rubber suction hose may vary, but it often includes information such a
Working Pressure10 bar
ShapeFirefighting rubber suction hoses typically have a cylindrical shape with couplings or connectors at
Country of OriginMade in India
A fire fighting rubber suction hose is a type of hose used in firefighting operations to supply water from a water source, such as a hydrant, pond, or portable water tank, to a fire engine or pump. These hoses are specifically designed for their function and are crucial components of firefighting equipment. Here are some key characteristics and information about fire fighting rubber suction hoses:
1. **Material**: These hoses are typically made from high-quality rubber or a combination of rubber and other materials. Rubber is chosen for its durability, flexibility, and resistance to abrasion and weather conditions.
2. **Size**: Firefighting suction hoses come in various sizes, with common diameters ranging from 2 inches (5 cm) to 6 inches (15 cm) or more. The size of the hose is chosen based on the specific needs and capacity of the firefighting operation.
3. **Purpose**: Suction hoses are used to draw water from a water source into the fire engine's pump for subsequent distribution through fire hoses. They create a vacuum to pull water from the source, so they need to be airtight and capable of withstanding negative pressure.
4. **Fittings**: These hoses are typically equipped with standard National Standard Thread (NST) or National Pipe Thread (NPT) fittings to ensure compatibility with other firefighting equipment.
5. **Reinforcement**: To enhance strength and prevent kinking, suction hoses often have reinforcement layers, which can be made of synthetic materials like polyester or nylon.
6. **Length**: The length of a fire fighting rubber suction hose can vary but is often 10 feet (3 meters) or longer. Longer hoses allow firefighting teams to access water sources that may be some distance away from the fire scene.
7. **Durability**: These hoses are designed to withstand the rigors of firefighting operations, including exposure to heat, flame, and chemicals.
8. **Maintenance**: Regular inspection and maintenance are essential to ensure that suction hoses remain in good working condition. This includes checking for signs of wear, damage, or deterioration and replacing any damaged components.
9. **Standards**: Firefighting equipment, including rubber suction hoses, is subject to various industry standards and regulations to ensure their quality and performance. Compliance with these standards is crucial for the safety and effectiveness of firefighting operations.
10. **Storage**: Proper storage is essential to prevent damage and deterioration of the hoses. Hoses should be stored in a cool, dry place away from direct sunlight and should not be exposed to freezing temperatures.
Firefighting rubber suction hoses play a critical role in ensuring a reliable water supply during firefighting efforts. Fire departments and emergency responders rely on these hoses to quickly and efficiently access water sources and combat fires.

Additional Information:
  • Item Code: 84241000
  • Delivery Time: 7 to 10 days
  • Packaging Details: I don't have access to real-time data, including specific production capacity, delivery times, or packaging details for specific products, as my knowledge was last updated in September 2021. The production capacity of rubber suction hoses can vary significantly depending on the manufacturer and the specific product specifications. To obtain information on production capacity, delivery times, and packaging details, you should contact a manufacturer or supplier directly. They can provide you with the most up-to-date and accurate information based on their current capabilities and product offerings. When contacting a manufacturer or supplier, be sure to provide them with the specific details of the rubber suction hoses you need, such as the size, material, and any other customization requirements. This will help them provide you with a more accurate quote and timeline for your order.
Yes! I am Interested
Watch Video
Request CallBack
  • Sandhyaflex Fire Fighting Rubber Hose
  • Sandhyaflex Fire Fighting Rubber Hose
  • Sandhyaflex Fire Fighting Rubber Hose
  • Sandhyaflex Fire Fighting Rubber Hose
  • Sandhyaflex Fire Fighting Rubber Hose
  • Sandhyaflex Fire Fighting Rubber Hose
  • Sandhyaflex Fire Fighting Rubber Hose
  • Sandhyaflex Fire Fighting Rubber Hose
  • Sandhyaflex Fire Fighting Rubber Hose
  • Sandhyaflex Fire Fighting Rubber Hose
  • Sandhyaflex Fire Fighting Rubber Hose
  • Sandhyaflex Fire Fighting Rubber Hose
  • Sandhyaflex Fire Fighting Rubber Hose
Sandhyaflex Fire Fighting Rubber Hose
Get Best Quote

Sandhyaflex Fire Fighting Rubber Hose

Approx. Price: Rs 12,500 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity5 Piece
Size/Diameter1/2 inch
Usage/ApplicationFire Fighting
Layers4 to 6 Layers
Working Pressure10 Bar
Packaging TypeStraight with HDPE Cover
Lengthas per customers requirement
ColorBlack
PatternPlain and Corrugated
Weight8kg/mtr
ShapeRound
Temperature100 Deg C max
Thickness10 to 12mm Wall thckness
I Deal InNew Only
Shock ProofYes
BrandSanddhayflex
Model Name/NumberFire Fighting Rubber Hose
Country of OriginMade in India

 

FIRE FIGHTING RUBBER SUCTION HOSE  with Both end Male and Female Coupling               AS PER IS:3549 and IS :902 Specification

 


Construction:

Lining & Cover:

The Lining and Cover shall be made from a suitable compound and shall be free from air blisters, porosity or any other visible defects.

Reinforcement:

The reinforcement shall be of woven fabric applied 45o and angle.The woven Fabric shall be well rubberized with a suitable rubber compound.

Spiral Wire:

 The wire used for the helical reinforcement shall be galvanized steel wire as per IS:280-1978.A fire fighting rubber suction hose is a type of hose specifically designed for use in firefighting operations. It is commonly used to draw water from a water source, such as a hydrant, pool, or water reservoir, and deliver it to the firefighting equipment, such as fire pumps or fire trucks.


Here are some key features and characteristics of a typical fire fighting rubber suction hose:


1. Material: The hose is made of durable rubber material that is resistant to heat, abrasion, and chemicals. This ensures that it can withstand the harsh conditions encountered in firefighting scenarios.


2. Reinforcement: The hose is reinforced with multiple layers of synthetic fabric or wire helix to enhance its strength and durability. This reinforcement prevents the hose from collapsing under vacuum conditions and provides resistance against kinking or twisting.


3. Size and Diameter: Fire fighting rubber suction hoses are available in various sizes and diameters to accommodate different flow rates and operational requirements. Common sizes range from 2 inches to 6 inches in diameter.


4. Suction Capability: The hose is designed to have excellent suction capabilities, allowing it to efficiently draw water from the water source. This is crucial for firefighting operations, as it ensures a steady supply of water to combat fires effectively.


5. Fittings and Connections: Fire fighting rubber suction hoses are equipped with standardized fittings and couplings, such as storz or instantaneous couplings, which facilitate easy connection and compatibility with firefighting equipment and water sources.


6. Pressure Rating: The hoses are typically rated for specific working pressures, which indicate the maximum pressure the hose can handle safely during operation. Higher pressure ratings allow for more efficient water delivery.


7. Compliance Standards: Fire fighting rubber suction hoses should comply with industry standards and regulations, such as those set by the National Fire Protection Association (NFPA) or local firefighting authorities. These standards ensure the hoses meet safety requirements and performance standards.


It is important to note that specific specifications and features may vary depending on the manufacturer and region. When selecting a fire fighting rubber suction hose, it's advisable to consult with firefighting professionals or refer to local regulations to ensure compliance and suitability for the intended application.

 

 


Additional Information:
  • Item Code: FFRSH-SANDHYAFLEX
  • Production Capacity: 5 number
  • Delivery Time: 15 to 30 days
  • Packaging Details: Packing straigth with HDPE Cover
Yes! I am Interested
Watch Video
Request CallBack
  • 100mm ID x 2.5m Fire Fighting Rubber Suction Hose
  • 100mm ID x 2.5m Fire Fighting Rubber Suction Hose
  • 100mm ID x 2.5m Fire Fighting Rubber Suction Hose
  • 100mm ID x 2.5m Fire Fighting Rubber Suction Hose
  • 100mm ID x 2.5m Fire Fighting Rubber Suction Hose
  • 100mm ID x 2.5m Fire Fighting Rubber Suction Hose
  • 100mm ID x 2.5m Fire Fighting Rubber Suction Hose
  • 100mm ID x 2.5m Fire Fighting Rubber Suction Hose
  • 100mm ID x 2.5m Fire Fighting Rubber Suction Hose
100mm ID x 2.5m Fire Fighting Rubber Suction Hose
Get Best Quote

100mm ID x 2.5m Fire Fighting Rubber Suction Hose

Approx. Price: Rs 14,000 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity3 Piece
Size/Diameter1/2 inch
Usage/ApplicationFire Fighting
TypeCorrugated and Plain Top
CertificationISO:9001:2015
Layers4 layer
Packaging Typein Coil Stregth with HDPE Cover
Length2.5Mtr
Working Pressure10kg/cm2
ColorBlack
PatternPlain and corrugated Type
ShapeRound
Thickness8 to 10mm Wall Thickness
Warranty6 Month
I Deal InNew Only
Shock ProofYes
Temperature-10 to 100 Degree C
PumpWater
Water TightnessConstruction: Lining & Cover: The Lining and Cover shall be made from a suitable compound and shall
WeightDepend of size
Acoustic InsulationConstruction: Lining & Cover: The Lining and Cover shall be made from a suitable compound and shall
Approvals/CertificationsSandhya Enterprises Manufacturer and Supplier of Fire Fights Rubber Suction Hose with Both end Male
Base MaterialsRubber and Brass Male Female Coupling as IS 902
Can Be Painted"SANDHYAFLEX"
Complementary ProductsFIRE FIGHTING RUBBER SUCTION HOSE
Dimension100mm
Expansion RatioConstruction: Lining & Cover: The Lining and Cover shall be made from a suitable compound and shall
HeightSr.No. Bore ID Tolerance Lining Thickness Filler Cover Length 1 100mm + 2.0mm 3.00mm 1.50 1.50 +2/
IntumescentConstruction: Lining & Cover: The Lining and Cover shall be made from a suitable compound and shall
Leed VocConstruction: Lining & Cover: The Lining and Cover shall be made from a suitable compound and shall
Minimum Ceiling ThicknessSr.No. Bore ID Tolerance Lining Thickness Filler Cover Length 1 100mm + 2.0mm 3.00mm 1.50 1.50 +2/
Minimum Separation ThicknessConstruction: Lining & Cover: The Lining and Cover shall be made from a suitable compound and shall
Minimum Wall Thickness8 to 10mm
Mold And Mildew PerformanceConstruction: Lining & Cover: The Lining and Cover shall be made from a suitable compound and shall
Brand"SANDHYAFLEX"
MaterialRubber
100mm ID100mm IDr with arrmoured male and female Coupling as per IS 902 and Rubber Hose as per IS:3549
75mm ID75mm ID x 3Mtr with arrmoured male and female Coupling as per IS 902 and Rubber Hose as per IS:3549
125mmID125mm ID x 3Mtr with arrmoured male and female Coupling as per IS 902 and Rubber Hose as per IS:3549
Country of OriginMade in India

SANDHYAFLEX
Manufacturer of Water Suction Rubber Hose as per IS:3549 specification
End Fitting Arrmoured as Per IS 902 Male and Female Coupling size  75mm ID
100mm ID
125mm ID
140mm ID

A fire fighting rubber suction hose is a type of hose specifically designed for use in firefighting operations. It is commonly used to draw water from a water source, such as a hydrant, pool, or water reservoir, and deliver it to the firefighting equipment, such as fire pumps or fire trucks.


Here are some key features and characteristics of a typical fire fighting rubber suction hose:


1. Material: The hose is made of durable rubber material that is resistant to heat, abrasion, and chemicals. This ensures that it can withstand the harsh conditions encountered in firefighting scenarios.


2. Reinforcement: The hose is reinforced with multiple layers of synthetic fabric or wire helix to enhance its strength and durability. This reinforcement prevents the hose from collapsing under vacuum conditions and provides resistance against kinking or twisting.


3. Size and Diameter: Fire fighting rubber suction hoses are available in various sizes and diameters to accommodate different flow rates and operational requirements. Common sizes range from 2 inches to 6 inches in diameter.


4. Suction Capability: The hose is designed to have excellent suction capabilities, allowing it to efficiently draw water from the water source. This is crucial for firefighting operations, as it ensures a steady supply of water to combat fires effectively.


5. Fittings and Connections: Fire fighting rubber suction hoses are equipped with standardized fittings and couplings, such as storz or instantaneous couplings, which facilitate easy connection and compatibility with firefighting equipment and water sources.


6. Pressure Rating: The hoses are typically rated for specific working pressures, which indicate the maximum pressure the hose can handle safely during operation. Higher pressure ratings allow for more efficient water delivery.


7. Compliance Standards: Fire fighting rubber suction hoses should comply with industry standards and regulations, such as those set by the National Fire Protection Association (NFPA) or local firefighting authorities. These standards ensure the hoses meet safety requirements and performance standards.


 

It is important to note that specific specifications and features may vary depending on the manufacturer and region. When selecting a fire fighting rubber suction hose, it's advisable to consult with firefighting professionals or refer to local regulations to ensure compliance and suitability for the intended application.


Additional Information:
  • Item Code: FFRSHEBC
  • Production Capacity: 100Mtr/day
  • Delivery Time: 15 to 45 Days max
  • Packaging Details: Straight with HDPE Cover
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Concrete End Hose
  • Concrete End Hose
  • Concrete End Hose
  • Concrete End Hose
  • Concrete End Hose
  • Concrete End Hose
  • Concrete End Hose
  • Concrete End Hose
  • Concrete End Hose
  • Concrete End Hose
  • Concrete End Hose
  • Concrete End Hose
  • Concrete End Hose
Concrete End Hose
Get Best Quote

Concrete End Hose

Approx. Price: Rs 25,000 / PieceGet Latest Price
Product Brochure
Product Details:
Usage/ApplicationPortable water pumps have a wide range of applications across various industries and settings. Here
Fuel TypeDiesel
VoltageThe voltage of a portable water pump can vary depending on the specific model and design. Portable w
PressureThe pressure of a portable water pump can vary based on the specific model, design, and intended app
HeadThe "head" in the context of a water pump refers to the maximum height or distance that the pump can
MaterialThe materials used in the construction of portable water pumps can vary based on the pump's design
FeaturesIt seems like there might be a slight misunderstanding in your question. The term "portable water ba
FrequencyThe frequency of a portable water pump refers to the frequency of the alternating current (AC) power
Bore x StrokeThe bore and stroke specifications are typically associated with internal combustion engines rather
A portable water pump is a compact and easily transportable device designed to move water from one location to another. These pumps are useful in various applications, such as irrigation, firefighting, drainage, construction, and emergency water supply. Portable water pumps come in different types, sizes, and power sources to suit specific needs. Here are some common types of portable water pumps:
1. **Submersible Water Pumps**: These pumps are designed to be submerged in water, making them suitable for draining flooded areas, emptying swimming pools, or moving water from one location to another. They are available in electric or gasoline-powered options.
2. **Centrifugal Water Pumps**: Centrifugal pumps use a rotating impeller to create a flow of water. They are suitable for various applications, including agricultural irrigation, transferring water between tanks, and more. They come in both electric and gas-powered models.
3. **Diaphragm Water Pumps**: Diaphragm pumps use a flexible diaphragm to create a pulsating flow of water. They are commonly used for applications like spraying pesticides or chemicals, as well as transferring water with suspended solids.
4. **Trash Water Pumps**: These pumps are designed to handle water with debris or solids. They are often used in construction sites and for drainage in areas prone to flooding.
5. **Jet Water Pumps**: Jet pumps are commonly used for lifting water from a well or other water sources. They can be either shallow-well or deep-well pumps, depending on the depth of the water source.
6. **Handheld Water Pumps**: These are manual pumps that you operate by hand, typically for small-scale applications or emergencies. They are lightweight and easy to carry, making them highly portable.
When choosing a portable water pump, consider factors such as the required flow rate, the distance the water needs to be moved, the power source (electric or gasoline), and the type of water you need to pump (clean water or water with solids). Additionally, ensure that the pump is appropriately sized for your specific needs, and follow safety and maintenance guidelines to ensure its long-term reliability and performance.

Additional Information:
  • Delivery Time: 7-15 days
  • Packaging Details: Standard packaging
Yes! I am Interested
Request CallBack
  • Fire Fighting Hose Coupling
  • Fire Fighting Hose Coupling
  • Fire Fighting Hose Coupling
  • Fire Fighting Hose Coupling
  • Fire Fighting Hose Coupling
  • Fire Fighting Hose Coupling
  • Fire Fighting Hose Coupling
  • Fire Fighting Hose Coupling
  • Fire Fighting Hose Coupling
  • Fire Fighting Hose Coupling
  • Fire Fighting Hose Coupling
  • Fire Fighting Hose Coupling
  • Fire Fighting Hose Coupling
Fire Fighting Hose Coupling
Get Best Quote

Fire Fighting Hose Coupling

Approx. Price: Rs 14,000 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity2 Piece
Usage/ApplicationFire Fighting
ConnectionMale and Female Coupling
Country of OriginMade in India
Fire hose couplings are used to quickly connect and disconnect hoses during water delivery applications. ... Our most popular fire hose couplings are BS 336 instantaneous that are available in either aluminium or gunmetThe Original Often Imitated Never Duplicated Available in a wide Range of Sizes. Materials. And Ratings to Meet Virtually Any CustomerCam Lock Fitting Application

SANDHYA ENTERPRISES is the Industry Leader Others have attempted to Duplicate but is Unparalleled in Selection. Capability and Depend. Ability, in Addition to Being the Most Recognized Brand of Hub on the Market. Myers offers larger Aluminum Hubs. Atex Approved Hubs. Cap-offs Drans and More!

A fire fighting rubber suction hose is a type of hose specifically designed for use in firefighting operations. It is commonly used to draw water from a water source, such as a hydrant, pool, or water reservoir, and deliver it to the firefighting equipment, such as fire pumps or fire trucks.
Here are some key features and characteristics of a typical fire fighting rubber suction hose:
1. Material: The hose is made of durable rubber material that is resistant to heat, abrasion, and chemicals. This ensures that it can withstand the harsh conditions encountered in firefighting scenarios.
2. Reinforcement: The hose is reinforced with multiple layers of synthetic fabric or wire helix to enhance its strength and durability. This reinforcement prevents the hose from collapsing under vacuum conditions and provides resistance against kinking or twisting.
3. Size and Diameter: Fire fighting rubber suction hoses are available in various sizes and diameters to accommodate different flow rates and operational requirements. Common sizes range from 2 inches to 6 inches in diameter.
4. Suction Capability: The hose is designed to have excellent suction capabilities, allowing it to efficiently draw water from the water source. This is crucial for firefighting operations, as it ensures a steady supply of water to combat fires effectively.

+2000C +20500C

CAMLOCK PRICE LIST (SS340)
TYPE                
Size A B C D E F DP DC
1/2” 65     175        
¾” 70   155 175   135    
1” 125 265 235 220 150 145    
11/4” 145   290 270 215 225    
11/2” 190 360 320 360 255 240 170 290
2” 240 475 420 430 425 350 255 340
21/2” 406     625        
3” 550   940 740 875 750 565 690
4” 695   1140 1175 1075      

Additional Information:
  • Item Code: FFHCSF
  • Production Capacity: fire fighting hose coupling
  • Delivery Time: 10 to 15 day
  • Packaging Details: packed with an ldpe eand bubbled sheet for the safety of the product and also packed in an curtain.
Yes! I am Interested
Watch Video
Request CallBack
  • Puddle Flanges
  • Puddle Flanges
  • Puddle Flanges
  • Puddle Flanges
  • Puddle Flanges
  • Puddle Flanges
  • Puddle Flanges
  • Puddle Flanges
  • Puddle Flanges
  • Puddle Flanges
  • Puddle Flanges
  • Puddle Flanges
  • Puddle Flanges
Puddle Flanges
Get Best Quote

Puddle Flanges

Approx. Price: Rs 400 / PieceGet Latest Price
Product Brochure
A puddle flange, also known as a water stop flange, is a specialized plumbing component used in building construction to prevent the ingress of water into structures, especially at pipe and conduit penetration points through concrete walls or slabs. This flange is typically installed during the concrete pouring process and is designed to create a watertight seal around pipes and conduits, thus preventing leaks and water damage.
Key features and functions of a puddle flange include:
1. **Flange Design:** Puddle flanges are typically made of rubber or flexible material. They have a circular, flat, or slightly raised design with a central opening to accommodate the pipe or conduit.
2. **Installation:** During construction, a puddle flange is positioned around the pipe or conduit where it passes through the concrete structure, with the flange extending both inside and outside the concrete.
3. **Waterproof Seal:** The flange creates a waterproof seal by preventing water from seeping through the opening in the concrete where the pipe or conduit penetrates. It acts as a barrier against water intrusion.
4. **Flexible Material:** The flexibility of the flange material allows it to conform to the shape and size of the pipe or conduit, ensuring a snug fit and an effective water seal.
5. **Usage Areas:** Puddle flanges are commonly used in applications where concrete structures need to be waterproof, such as basements, tunnels, swimming pools, sewage treatment plants, and any situation where pipes or conduits pass through concrete walls or floors.
6. **Materials:** Puddle flanges are often made from materials like rubber or EPDM (ethylene propylene diene monomer), which are known for their resistance to water and flexibility.
Overall, puddle flanges play a crucial role in maintaining the structural integrity and preventing water damage in construction projects. They are essential components for ensuring the waterproofing of concrete structures, especially in areas prone to water infiltration.

Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Sandhyaflex Thermoplastic Pipe
  • Sandhyaflex Thermoplastic Pipe
  • Sandhyaflex Thermoplastic Pipe
  • Sandhyaflex Thermoplastic Pipe
  • Sandhyaflex Thermoplastic Pipe
  • Sandhyaflex Thermoplastic Pipe
  • Sandhyaflex Thermoplastic Pipe
  • Sandhyaflex Thermoplastic Pipe
  • Sandhyaflex Thermoplastic Pipe
  • Sandhyaflex Thermoplastic Pipe
  • Sandhyaflex Thermoplastic Pipe
  • Sandhyaflex Thermoplastic Pipe
  • Sandhyaflex Thermoplastic Pipe
Sandhyaflex Thermoplastic Pipe
Get Best Quote

Sandhyaflex Thermoplastic Pipe

Approx. Price: Rs 100 / METERGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 METER
Size/Dia1 inch
Thickness8 mm
ApplicationIndustries
Length of PipeDimension ID Tolerance Working pressure at 55 + 2oC MPa Burst pressure at 55 + 2oC MPa Standard
Length30 mtr
Usage/ApplicationFire Fighting
Size/DiameterAccording to requirement
Size1 inch
Working PressureDimension ID Tolerance Working pressure at 55 + 2oC MPa Burst pressure at 55 + 2oC MPa Standard
ColorDimension ID Tolerance Working pressure at 55 + 2oC MPa Burst pressure at 55 + 2oC MPa Standard
MaterialThermoplastic Hose
BrandSANDHYAFLEX
Size Diameter3" and 4" ID
Country of OriginMade in India

Thermoplastic Hoses.

SANDHYA ETNERPRISES is offering an extensive range of Thermoplastic Hoses. To meet the international quality standards, these hoses are designed and developed under the strict supervision of our experienced professionals, employing latest technology. Post-production, these hoses are stringently checked on various parameters to ensure zero-defect. These hoses are suitable for high pressure hydraulic, chemical industries, rescue tools, measuring & control techniques and mining & offshore applications. Thermoplastic Hoses are known for chemical & abrasion resistance, easy to handle nature, simple installation and perfect finish.

Other information:

We have thermo plastic hoses for

·         Pneumatic tool hose

·         Super spray hose

·         Welding Hose

·         Supe

 

       Dimension ID

Tolerance

Working pressure
at 55 + 2oC  MPa

Burst pressure
at 55 + 2oC  MPa

Standard Length/Roll

mm

INCH

mm

 

 

 

12.5

½

+0.75

0.7

1.7

100

16

5/8

+0.75

0.7

1.7

50

20

      ¾

     +0.75

             0.7

1.7

50

25

1

+1.25

0.7

1.7

50

32

11/4

+1.25

               0.5

1.25

30/50

38

     11/2

   +1.50

               0.5

1.25

30/50

50

2

+1.50

               0.5

1.25

30/50

 



Additional Information:
  • Item Code: TPH-SANDHYAFLEX
  • Production Capacity: 1000Mtr/days
  • Delivery Time: 15days-30days
  • Packaging Details: Packing in coil with HDPE cover
Yes! I am Interested
Watch Video
X