repeat">
Sandhya Enterprises
Sandhya Enterprises
Jeedimetla, Hyderabad, Telangana
GST No. 36GNLPS1299P1ZS
08048977570 91% Response Rate
Send E-mail

Bridge Strip Seal Expansion Joint

Bridge Expansion Joint Gap 40.0mm (Movement up to 80mm). Bridge Expansion Joint consist of two edge beams with anchorages and with Neoprene sealing element held firmly in the housing of edge beams that guarantee the water tightness the joint. The maximum gap between the edge beams at the road surface when the joint fully opens due to maximum contractions of the deck shall be limited to 80mm for comfortable passage of traffic. The edge beams protects the adjacent bridge deck concrete from damage due to vehicular impact and also transfer the vehicular loads to the deck structures through robust anchorage system. Typical Bridge Expansion Joint is shown in the figure below.

Bridge Expansion Joint

Rs : 2800 / R.Mtr

GST:18% Extra

Packing and Forwording Extra

TestsMoRTH Specification Section 2600, Clause 2607 Clause NumberPermissible Limits as per MoRTH Specification Section 2600, Clause 2607Relevant Code for Testing Procedure/MethodResults
1 Physical Properties - Before Ageing        
  Hardness Test Table 2600-1 58-68 Shore A IS : 3400 (Part II) 60-62 Shore A
  Tensile Strength Table 2600-1 11 MPa (Min) IS : 3400 (Part I) 17.5 MPa
  Elongation at Break Table 2600-1 350% (Min) IS : 3400 (Part I) 415%
2 Ash Content Cl. 915.1.3, IRC 83 (Part II)2015 5 % (Max) IS : 3400 (Part XXII) 3.50%
3 Polymer Percentage Cl. 915.1.3, IRC 83 (Part II)2015 60 % (Min) IS : 3400 (Part XXII) 63.14%
4 Polymer Table 2600-1 Chloroprene(CR) ASTM D297 Chloroprene(CR)
5 Compression Set Table 2600-1 -28% (Min) IS : 3400 (Part x) 16.22%
6 Shock Elasticity Table 2600-1 -25% (Min) IS : 3400 (Part X) 27.25%
7 Tear Propagation Strength        
  Longitudinal Table 2600-1 10N/mm (min IS : 3400 (Part 17) 45.22N/mm
  Transvers Table 2600-1 10N/mm (min) IS : 3400 (Part 17) 50.24N/mm
8 Swelling behaviour in ASTM Oil No 3 for 70oC for 116 hrs        
  Volume Change Table 2600-1 350% (Min) IS : 3400 (Part 17) -16.22%
  Change in Hardness Table 2600-1 -20 Shore A (max) (max) IS : 3400 (Part 17) -6 ShoreA
9 Physical Properties - After Ageing @ 70oC for 14days        
  Change in Tensile Strength % Table 1 Cl. 915.2 - 20 % (Max) IS : 3400 (Part IV) -7.13%
  Change in Elongation at Break in % Table 1 Cl. 915.2 - 20 % (Max) IS : 3400 (Part IV) -14.66%
  Change in Hardness Table 1 Cl. 915.2 + 5 Deg (Max) IS : 3400 (Part IV) +26
Request CallBack
  • Elastomeric Bridge Bearing
  • Elastomeric Bridge Bearing
  • Elastomeric Bridge Bearing
  • Elastomeric Bridge Bearing
  • Elastomeric Bridge Bearing
  • Elastomeric Bridge Bearing
  • Elastomeric Bridge Bearing
  • Elastomeric Bridge Bearing
  • Elastomeric Bridge Bearing
  • Elastomeric Bridge Bearing
  • Elastomeric Bridge Bearing
  • Elastomeric Bridge Bearing
  • Elastomeric Bridge Bearing
Elastomeric Bridge Bearing
Get Best Quote

Elastomeric Bridge Bearing

Approx. Price: Rs 4,500 / PieceGet Latest Price
Product Brochure
Product Details:
MaterialNatural Rubber
Usage/ApplicationHighway bridges
BreathThe term "breadth" typically refers to the width or extent of something. In the context of elastomer
CapacityThe capacity of elastomeric bridge bearings can vary widely depending on factors such as the type of
Compression Set TemperatureThe compression set temperature of an elastomeric material refers to the temperature at which the ma
Compression StrengthThe compression strength of an elastomeric bridge bearing, like other mechanical properties, depends
Elongation At BreakThe elongation at break, also known as the ultimate elongation or ultimate tensile elongation, is a
HardnessThe hardness of elastomeric bridge bearings is an important mechanical property that provides an ind
Bridge Drainage Spout :

You can get the best bridge drainage spout from Sandhya Flex which is of high quality and offers finest performance. The bridge drainage spout is a pipe that carries rainwater down from a platform. Moreover, the materials used to make it are mild steel and galvanized. It protects it and prevents corrosion or rusting resulting due to the water flowing through the pipes. Also, at Sandhya Flex, Bridge Drainage Spout are manufactured and supplied as per the specifications of MORTH. Also, we provide a range of drainage spout as well as according to customer specifications.

Being a prominent drainage spout manufacturers for bridges, we offer top-class products to the customers. Also, they are precisely designed to ensure the best performance and long lasting. The bridge drainage spouts we offer are high corrosion-resistance and rust-resistance. The drainage spouts are easy to install alongside having superb finish, precise dimensions and finest manufacturing.

Also, every drainage spout is rigorously tested by our quality controllers. The bridge drainage spouts are made of top-notch raw material along with advanced technology with the best practices. Therefore, for the best drainage spouts at exceptional prices, Sandhya Flex can be the best choice.

Size: 210mmx210mm, Dia of Collection Pipe 100mm, length of Collection Pipe 300mm

Size: 210mmx210mm, Dia of Collection Pipe 150mm, length of Collection Pipe 600mm.

Size: 180mmx305mm, Dia of Collection Pipe 150mm, length of Collection Pipe 100mm.

Size: 200mmx150mm, Dia of Collection Pipe 50mm, length of Collection Pipe 300.

Size: 200mmx150mm, Dia of Collection Pipe 50mm, length of Collection Pipe 400.

Size: 300mmx300mm, Dia of Collection Pipe 100mm, length of Collection Pipe 400


Additional Information:
  • Delivery Time: 7-15 days
  • Packaging Details: Standard packaging
Yes! I am Interested
Watch Video
Request CallBack
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
Bridge Strip Seal Expansion Joint
Get Best Quote

Bridge Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
Usage/Applicationconstruction
BrandSandhyaflex
FeaturesBridge expansion joints are crucial components in the construction and maintenance of bridges, desig
Single Joint WeightThe single weight of a bridge expansion joint depends on various factors, and it can vary significan
Elongation At BreakThe elongation at break of a bridge expansion joint refers to the percentage increase in length that
Country of OriginMade in India
A bridge strip seal expansion joint is a type of expansion joint used in bridges and other structures to accommodate movement caused by temperature variations, seismic activity, and other factors. Expansion joints are crucial in preventing damage to structures by allowing controlled movement and absorbing the stresses generated.
The strip seal expansion joint typically consists of steel edge profiles and a rubber or neoprene sealing element. Here's a breakdown of its key components:
1. **Steel Edge Profiles:** These are usually two parallel steel edge profiles that run along the length of the joint on either side. These profiles provide support and guide for the movement of the joint.
2. **Sealing Element:** The sealing element is a flexible material, often made of rubber or neoprene. It is placed between the steel edge profiles and ensures a watertight seal while allowing for movement. This material should be durable, weather-resistant, and capable of accommodating various types of movement.
3. **Anchor Systems:** The expansion joint is anchored to the bridge structure to prevent unintentional movement or displacement. Anchors are usually positioned at intervals along the length of the joint.
4. **Cover Plates:** In some designs, cover plates may be used to protect the sealing element from debris, water, and other environmental factors. These plates can also provide a smoother surface for vehicles to traverse.
The strip seal expansion joint allows for both translational and rotational movement, providing flexibility for the structure during expansion and contraction. This movement helps to reduce stress on the bridge components and prevents potential damage that could occur if the expansion and contraction were restricted.
Regular inspection and maintenance of strip seal expansion joints are essential to ensure their effectiveness over time. Factors such as exposure to weather, traffic load, and other environmental conditions can impact the performance of the joint, so periodic checks are necessary to identify and address any issues.

Additional Information:
  • Production Capacity: 5000
  • Delivery Time: 15 days
  • Packaging Details: standard packaging
Yes! I am Interested
Watch Video
Request CallBack
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
Strip Seal Expansion Joint
Get Best Quote

Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
Product Details:
Usage/Applicationconstruction
Brandsandhyaflex
FeaturesStrip seal expansion joints are important components in construction projects, especially in bridges
Single Joint WeightThe single joint weight of a strip seal expansion joint can vary widely based on several factors, in
Elongation At BreakThe elongation at break of a strip seal expansion joint refers to the percentage increase in length
Country of OriginMade in India
Strip seal expansion joints are vital components in construction projects, particularly in bridges and structures, to accommodate movement caused by temperature changes, seismic activity, and other factors. Here are key features associated with strip seal expansion joints:
1. **Flexibility:**   - Strip seal expansion joints are highly flexible, allowing them to accommodate both vertical and horizontal movements in structures. This flexibility helps prevent damage to the structure caused by thermal expansion and contraction.
2. **Watertight Seal:**   - These joints typically feature a watertight seal, preventing the ingress of water and corrosive materials. A proper seal is essential for protecting structural components and preventing deterioration.
3. **Durable Materials:**   - Strip seals are often made from durable materials such as rubber, neoprene, or other elastomers. These materials provide resilience, durability, and resistance to environmental factors.
4. **Easy Installation and Maintenance:**   - Strip seal expansion joints are designed for relatively easy installation and maintenance. This is crucial for minimizing construction or maintenance downtime.
5. **Noise and Vibration Reduction:**   - The flexibility of strip seal expansion joints helps absorb and dampen vibrations, reducing noise generated by the movement of the structure. This is especially important in urban areas.
6. **Temperature Resistance:**   - Strip seal expansion joints are designed to withstand a range of temperatures, ensuring their effectiveness in various climates. Materials used are chosen to resist deterioration due to temperature extremes.
7. **Bridge Aesthetics:**   - Strip seals are often designed with aesthetics in mind, maintaining a smooth and uniform appearance on the surface of the bridge. This contributes to both functional and aesthetic considerations.
8. **Movement Range:**   - Strip seal expansion joints are available in various designs to accommodate different movement ranges. The selection depends on the specific requirements of the structure and the expected movement due to external factors.
9. **Compliance with Standards:**   - Strip seal expansion joints are designed to comply with industry standards and specifications, ensuring they meet safety and performance requirements. Adherence to standards is crucial for reliability.
10. **Seismic Resistance:**    - Some strip seal expansion joints are designed to provide additional resistance to seismic forces, enhancing the overall seismic performance of the structure.
11. **Long Service Life:**    - Properly designed and installed strip seal expansion joints can have a long service life, contributing to the overall durability and longevity of the structure.
12. **Customizable Designs:**    - Manufacturers often provide customizable designs to meet specific project requirements, such as unique movement conditions or aesthetic preferences.
When considering strip seal expansion joints for a project, it's essential to consult with engineers and adhere to industry standards to ensure proper selection, installation, and performance. The features mentioned above contribute to the effectiveness and longevity of strip seal expansion joints in various construction applications.

Additional Information:
  • Delivery Time: 15 days
  • Packaging Details: standard packaging
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • SANDHYAFLEX  Strip Seal Expansion Joint
  • SANDHYAFLEX  Strip Seal Expansion Joint
  • SANDHYAFLEX  Strip Seal Expansion Joint
  • SANDHYAFLEX  Strip Seal Expansion Joint
  • SANDHYAFLEX  Strip Seal Expansion Joint
  • SANDHYAFLEX  Strip Seal Expansion Joint
  • SANDHYAFLEX  Strip Seal Expansion Joint
  • SANDHYAFLEX  Strip Seal Expansion Joint
  • SANDHYAFLEX  Strip Seal Expansion Joint
  • SANDHYAFLEX  Strip Seal Expansion Joint
  • SANDHYAFLEX  Strip Seal Expansion Joint
  • SANDHYAFLEX  Strip Seal Expansion Joint
  • SANDHYAFLEX  Strip Seal Expansion Joint
SANDHYAFLEX  Strip Seal Expansion Joint
Get Best Quote

SANDHYAFLEX Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
Product Details:
Usage/Applicationbridges
Brandsandhyaflex
Colorblack
FeaturesStrip seal expansion joints are commonly utilized in various infrastructure projects to accommodate
Country of OriginMade in India
A bridge strip seal expansion joint is a component used in bridge construction and infrastructure to accommodate movement, absorb vibration, and reduce stress caused by temperature variations, seismic activity, or other factors. Expansion joints are critical in ensuring the longevity and structural integrity of bridges by allowing controlled movement between adjacent segments.
The strip seal expansion joint typically consists of the following key components:
1. **Metal Edge Profiles:** These are the outer edges of the expansion joint, often made of metal, providing support and containment for the entire structure.
2. **Rubber Seals:** These are flexible rubber or elastomeric components positioned between the metal edge profiles. The rubber seals allow for movement in multiple directions while preventing the ingress of debris, water, and other contaminants.
3. **Anchor Systems:** To secure the strip seal expansion joint to the bridge structure, anchor systems are employed. These systems prevent the expansion joint from moving unintentionally while still allowing for controlled movement.
4. **Cover Plates:** Cover plates are often installed on top of the rubber seals to protect them from traffic loads, debris, and weather exposure.
The primary purpose of a strip seal expansion joint is to absorb and accommodate movement caused by factors such as temperature changes, seismic events, and dynamic loads. This movement helps prevent the build-up of stress within the bridge structure, reducing the risk of damage and enhancing the overall durability of the bridge.
Regular inspection and maintenance of strip seal expansion joints are essential to ensure their proper functioning over time. Damaged or deteriorated expansion joints can compromise the performance of a bridge and lead to more significant issues if not addressed promptly.

Additional Information:
  • Delivery Time: 7 days
  • Packaging Details: standard packaging
Yes! I am Interested
Watch Video
Request CallBack
  • T type Strip Seal Expansion Joint
  • T type Strip Seal Expansion Joint
  • T type Strip Seal Expansion Joint
  • T type Strip Seal Expansion Joint
  • T type Strip Seal Expansion Joint
  • T type Strip Seal Expansion Joint
  • T type Strip Seal Expansion Joint
  • T type Strip Seal Expansion Joint
  • T type Strip Seal Expansion Joint
  • T type Strip Seal Expansion Joint
  • T type Strip Seal Expansion Joint
  • T type Strip Seal Expansion Joint
  • T type Strip Seal Expansion Joint
T type Strip Seal Expansion Joint
Get Best Quote

T type Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
Product Details:
MaterialStainless Steel
Size3/4 inch
Usage/ApplicationBridges consruction and other structures
Brandsandhyaflex
ColorBlack or Dard Grey
FeaturesT-type Strip Seal Expansion Joints are designed to accommodate movements in bridges and structures
Single Joint WeightThe weight of a T-type expansion joint filler board depends on various factors, including the dimens
Elongation At BreakThe elongation at break, also known as ultimate elongation, is a measure of the ability of a materia
Country of OriginMade in India
A bridge expansion joint, often simply referred to as an expansion joint, is a structural component used in the construction of bridges and other infrastructure to allow for movement, expansion, and contraction due to temperature changes, traffic loads, and other factors. These joints are essential to prevent damage and maintain the structural integrity of the bridge.
Key features and information about bridge expansion joints:
1. Movement Accommodation: Bridge expansion joints are designed to accommodate various types of movement, including expansion (increasing in length), contraction (decreasing in length), lateral movement, and vertical movement. This flexibility helps prevent cracking, distortion, or failure of the bridge structure.
2. Types: There are different types of expansion joints used in bridge construction, including:   - Modular Expansion Joints: These are pre-fabricated, multi-segment joints that can accommodate larger movements.   - Strip Seals: These consist of flexible rubber seals that are installed between metal or concrete strips.   - Finger Joints: These joints feature a series of finger-like elements that can expand and contract.   - Sliding Plate Joints: These joints use sliding plates to allow movement.
3. Materials: Expansion joints can be made of various materials, including steel, aluminum, rubber, and other elastomers. The choice of material depends on factors like the bridge's design, expected movement, and environmental conditions.
4. Installation: Expansion joints are typically installed between bridge segments or at connection points to accommodate movement. Proper installation is crucial to ensure their effectiveness.
5. Maintenance: Regular inspection and maintenance are essential to ensure that expansion joints continue to function correctly. Maintenance may include cleaning, lubrication, and replacement of damaged components.
6. Safety: Properly functioning expansion joints help ensure the safety and longevity of a bridge. Inadequate maintenance or failure of expansion joints can lead to accidents and costly structural damage.
7. Design Considerations: The design of expansion joints should take into account factors like temperature fluctuations, traffic loads, seismic considerations, and environmental conditions.
Bridge expansion joints are a critical part of infrastructure design and construction, as they allow bridges to adapt to changing conditions while maintaining structural stability. Failure to install and maintain these joints properly can lead to serious structural problems, making them a key component in ensuring the safety and longevity of bridges and other similar structures.

Additional Information:
  • Delivery Time: 7-15 days
  • Packaging Details: Standard Packaging
Yes! I am Interested
Watch Video
Request CallBack
  • SANDHYAFLEX Strip Seal Expansion Joint
  • SANDHYAFLEX Strip Seal Expansion Joint
  • SANDHYAFLEX Strip Seal Expansion Joint
  • SANDHYAFLEX Strip Seal Expansion Joint
  • SANDHYAFLEX Strip Seal Expansion Joint
  • SANDHYAFLEX Strip Seal Expansion Joint
  • SANDHYAFLEX Strip Seal Expansion Joint
  • SANDHYAFLEX Strip Seal Expansion Joint
  • SANDHYAFLEX Strip Seal Expansion Joint
  • SANDHYAFLEX Strip Seal Expansion Joint
  • SANDHYAFLEX Strip Seal Expansion Joint
  • SANDHYAFLEX Strip Seal Expansion Joint
  • SANDHYAFLEX Strip Seal Expansion Joint
SANDHYAFLEX Strip Seal Expansion Joint
Get Best Quote

SANDHYAFLEX Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
Usage/Applicationconstruction
Brandsandhyaflex
FeaturesStrip seal expansion joints are essential components in construction projects, particularly in bridg
Elongation At BreakThe elongation at break of a strip seal expansion joint, like any elastomeric material, refers to th
Country of OriginMade in India
A bridge strip seal expansion joint is a type of expansion joint used in bridges and other structures to accommodate movement caused by temperature variations, seismic activity, and other factors. Expansion joints are crucial in preventing damage to structures by allowing controlled movement and absorbing the stresses generated.
The strip seal expansion joint typically consists of steel edge profiles and a rubber or neoprene sealing element. Here's a breakdown of its key components:
1. **Steel Edge Profiles:** These are usually two parallel steel edge profiles that run along the length of the joint on either side. These profiles provide support and guide for the movement of the joint.
2. **Sealing Element:** The sealing element is a flexible material, often made of rubber or neoprene. It is placed between the steel edge profiles and ensures a watertight seal while allowing for movement. This material should be durable, weather-resistant, and capable of accommodating various types of movement.
3. **Anchor Systems:** The expansion joint is anchored to the bridge structure to prevent unintentional movement or displacement. Anchors are usually positioned at intervals along the length of the joint.
4. **Cover Plates:** In some designs, cover plates may be used to protect the sealing element from debris, water, and other environmental factors. These plates can also provide a smoother surface for vehicles to traverse.
The strip seal expansion joint allows for both translational and rotational movement, providing flexibility for the structure during expansion and contraction. This movement helps to reduce stress on the bridge components and prevents potential damage that could occur if the expansion and contraction were restricted.
Regular inspection and maintenance of strip seal expansion joints are essential to ensure their effectiveness over time. Factors such as exposure to weather, traffic load, and other environmental conditions can impact the performance of the joint, so periodic checks are necessary to identify and address any issues.

Additional Information:
  • Production Capacity: 5000
  • Delivery Time: 15 days
  • Packaging Details: standard packaging
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Sandhyaflex F Type  Strip Seal Expansion Joint
  • Sandhyaflex F Type  Strip Seal Expansion Joint
  • Sandhyaflex F Type  Strip Seal Expansion Joint
  • Sandhyaflex F Type  Strip Seal Expansion Joint
  • Sandhyaflex F Type  Strip Seal Expansion Joint
  • Sandhyaflex F Type  Strip Seal Expansion Joint
  • Sandhyaflex F Type  Strip Seal Expansion Joint
  • Sandhyaflex F Type  Strip Seal Expansion Joint
  • Sandhyaflex F Type  Strip Seal Expansion Joint
  • Sandhyaflex F Type  Strip Seal Expansion Joint
  • Sandhyaflex F Type  Strip Seal Expansion Joint
  • Sandhyaflex F Type  Strip Seal Expansion Joint
  • Sandhyaflex F Type  Strip Seal Expansion Joint
Sandhyaflex F Type  Strip Seal Expansion Joint
Get Best Quote

Sandhyaflex F Type Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
Usage/ApplicationBridge Construction
MaterialNeoprene
Size75 x 75 x 10 mm
ColorBlue and Ash
Thickness10 - 120 mm
Surface FinishingSmooth
Surface TreatmentSmooth

Sandhya Enterprises AN ISO: ISO:9001:2015 Certisfied Company is manufacturer and Supplier of Strip Seal Expansion Joint as per IRC (83 (Part II)2018, MoRTH and UIC 772 2R Specification  Gap 40mm and 70 to 80mm movement, 65mm and 75 mm Edges Beamd with 16mm Anchoring Rod, Neoprene Rubber Strip as per IRC 83 (Part II) 2018 Specificaiton
Strip Seal Expansion Joint
F Type
M Type
T Type
W Type


Additional Information:
  • Item Code: SESSEJ
  • Production Capacity: 50 meters
  • Delivery Time: 10 days or 45 days
  • Packaging Details: open
Yes! I am Interested
Watch Video
Request CallBack
  • Sandhyaflex M Type Bridge Strip Seal Expansion Joint
  • Sandhyaflex M Type Bridge Strip Seal Expansion Joint
  • Sandhyaflex M Type Bridge Strip Seal Expansion Joint
  • Sandhyaflex M Type Bridge Strip Seal Expansion Joint
  • Sandhyaflex M Type Bridge Strip Seal Expansion Joint
  • Sandhyaflex M Type Bridge Strip Seal Expansion Joint
  • Sandhyaflex M Type Bridge Strip Seal Expansion Joint
  • Sandhyaflex M Type Bridge Strip Seal Expansion Joint
  • Sandhyaflex M Type Bridge Strip Seal Expansion Joint
  • Sandhyaflex M Type Bridge Strip Seal Expansion Joint
  • Sandhyaflex M Type Bridge Strip Seal Expansion Joint
  • Sandhyaflex M Type Bridge Strip Seal Expansion Joint
  • Sandhyaflex M Type Bridge Strip Seal Expansion Joint
Sandhyaflex M Type Bridge Strip Seal Expansion Joint
Get Best Quote

Sandhyaflex M Type Bridge Strip Seal Expansion Joint

Approx. Price: Rs 3,100 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
Size3 inch
Usage/ApplicationBridge Construction
Thread Size3 Type of Strip Seal Expansion Joiny 1. F Type Strip Seal Expansion Joint 2. M Type Strip Seal Expan
MaterialSA The ability of a bridge deck expansion Joint to be smooth ridding,durable,and waterprrf is
BrandSandhyaflex
Surface FinishSA The ability of a bridge deck expansion Joint to be smooth ridding,durable,and waterprrf is
Operating Temperature-10 to 100 Deg C
ColorGrey
Range Of Width Provided75mm
FeaturesWeather and Heat Resistance3 Type of Strip Seal Expansion Joiny 1. F Type Strip Seal Expansion Joint
Corrosion ResistanceSA The ability of a bridge deck expansion Joint to be smooth ridding,durable,and waterprrf is
DiameterSA The ability of a bridge deck expansion Joint to be smooth ridding,durable,and waterprrf is
Model Name/Number3 Type of Strip Seal Expansion Joiny 1. F Type Strip Seal Expansion Joint 2. M Type Strip Seal Expan
Nominal PressureN.A.3 Type of Strip Seal Expansion Joiny 1. F Type Strip Seal Expansion Joint 2. M Type Strip Seal E
Pressure RatingN.A.3 Type of Strip Seal Expansion Joiny 1. F Type Strip Seal Expansion Joint 2. M Type Strip Seal E
ShapeSA The ability of a bridge deck expansion Joint to be smooth ridding,durable,and waterprrf is
Surface FinishingSmooth
Surface Treatmentsand Blasting and Spray Painting
Thickness6mm
Working Temperature50 Deg C
Country of OriginMade in India
The Strip Seal Expansion Joint system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic. In all types of constructive systems there is clear distinction between the two main functions "inflexible anchoring" and "watertight connection". This allows for best possible adjustment of the two components sealing profile and edge construction to the conditions of the traffic road.

SA The  ability of a bridge deck  expansion  Joint  to be smooth ridding , durable, and waterproof is essential to the performance  of the bridge superstructure. Recent developments in the design manufacturer, and installation procedures for expansion dam systems have indicated a potential ability to meet these requirements. in this study, the characteristics and field performance of modular expansion Joint system, metal-reinforced elastomeric expansion Dam Systems and Gland - type bridge  expansion dam systems  were evaluated, Results of The field study are summarized and recommendations made on continued use of some systems, including neoprene seal for  small movements .

ipStrip Seal Expansion Joint Description :

The Bridge deck expansion joints is an important element in the functioning of bridge structures. When joints fail to fnction properly they can create problem out of proprtion to their size. Selection of a good joints for use can create fewer bridge maintenance problems there for Indian Ministery of Roads Transport & Highways (MORT& H ) has setup certain guidelines for the Design, Manufacture and Installation of Strip Seal Expansion Joint in India.

Types Of Strip Seal Expansion Joint we Design, Manufacture, Supply, Replace, Supervision & Installation

COMPRESSION SEAL JOINT:

is used for smaller range movements from 0 to 40mm. It consist of two angles with an elastomeric seal. The seal is installed in compressed position This Joint is ideal for replacement of old joint and for new project.

Strip Seal Expansion Joint :

Strip Seal Expansion Joint is used for medium movement from 0 to 80mm. It consists of two edge profiles with an elastomeric seal in between. The edge profiles are generally cast into a noising of the structure. These Strip Seal Expansion Joint are expected performance life more than twenty five years. This is most popular and expected joint system among Bridge Consultants and Engineers worldwide.

Design Chart-Strip Seal Expansion Joint:
SERIESINSTALLATION WIDTH(IW)MOVEMENT(MM
SS-80 40 80
SS-130 60 180

MODULAR STRIPE SEAL EXPANSION JOINT :

Modular Strip Seal Expansion joint is used for large movement from 0 to 2000mm. In addition to edge profiles, it has a series of supported intermediate beams and sseaks in a modular way to accommodate the movement of the joints. Each seal have a capacity to accommodate movement upto 80mm.
3 Type of Strip Seal Expansion Joiny
1. F Type Strip Seal Expansion Joint
2. M Type Strip Seal Expansion Joint
3. T Type Strip Seal Expansion Joint


Additional Information:
  • Item Code: BDEJ
  • Production Capacity: 25Mtr/day
  • Delivery Time: 15days-30days
  • Packaging Details: Open
Yes! I am Interested
Watch Video
Request CallBack
  • Sandhyaflex Strip Seal Expansion Joint With 75mm Edges Beam
  • Sandhyaflex Strip Seal Expansion Joint With 75mm Edges Beam
  • Sandhyaflex Strip Seal Expansion Joint With 75mm Edges Beam
  • Sandhyaflex Strip Seal Expansion Joint With 75mm Edges Beam
  • Sandhyaflex Strip Seal Expansion Joint With 75mm Edges Beam
  • Sandhyaflex Strip Seal Expansion Joint With 75mm Edges Beam
  • Sandhyaflex Strip Seal Expansion Joint With 75mm Edges Beam
  • Sandhyaflex Strip Seal Expansion Joint With 75mm Edges Beam
  • Sandhyaflex Strip Seal Expansion Joint With 75mm Edges Beam
  • Sandhyaflex Strip Seal Expansion Joint With 75mm Edges Beam
Sandhyaflex Strip Seal Expansion Joint With 75mm Edges Beam
Get Best Quote

Sandhyaflex Strip Seal Expansion Joint With 75mm Edges Beam

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
Size3 inch
Usage/ApplicationBridge Construction
MaterialMetal and Rubber
Surface FinishSmooth
Operating TemperatureSand Blasting and Spay Painting
ColorBlue,Ash
BrandSandhyaflex
Range Of Width Provided65mm and 75mm Edges Beam
FeaturesExcellent Weather and Corrosion Resistance
Corrosion ResistanceGood
Diameter16mm Dia of Anchoring Rod
FinishingSmooth
Hardness63 Shore A
Model Name/NumberStrip Seal Expansion Joint
Seal JointBridge Expansion Joint
Size/Dimension65x65 and 75x75mm
Steel Beam65x65 and 75x75mm
ShapeL shape
Surface FinishingSmooth
Stud Diameter16mm
Surface TreatmentSand Blasting and Spray Painting
Working Temperature100 Deg C Max
Thickness75 mm

We are offering a wide range of Sandhyaflex Strip Seal Expansion Joint With 75mm Edges Beam.The Strip Seal Expansion Joint system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic. In all types of constructive systems there is clear distinction between the two main functions "inflexible anchoring" and "watertight connection“. This allows for best possible adjustment of the two components sealing profile and edge construction to the conditions of the traffic road.

Strip Seal Expansion Joint Key Features:

  • Mechanically Locked Seal
  •  
  • Continuous Sealing Elements
  •  
  • Racking movement capability (Selective profile of Sealing Element)
  •  
  • Self Debris Expelling Capability
  •  
  • Less prone to Abrasion

Strip Seal Expansion Joint Description :

The Bridge deck expansion joints is an important element in the functioning of bridge structures. When joints fail to fnction properly they can create problem out of proprtion to their size. Selection of a good joints for use can create fewer bridge maintenance problems there for Indian Ministery of Roads Transport & Highways (MORT& H ) has setup certain guidelines for the Design, Manufacture and Installation of Strip Seal Expansion Joint in India.

Types Of Strip Seal Expansion Joint we Design, Manufacture, Supply, Replace, Supervision & Installation

COMPRESSION SEAL JOINT:

is used for smaller range movements from 0 to 40mm. It consist of two angles with an elastomeric seal. The seal is installed in compressed position This Joint is ideal for replacement of old joint and for new project.

Strip Seal Expansion Joint :

Strip Seal Expansion Joint is used for medium movement from 0 to 80mm. It consists of two edge profiles with an elastomeric seal in between. The edge profiles are generally cast into a noising of the structure. These Strip Seal Expansion Joint are expected performance life more than twenty five years. This is most popular and expected joint system among Bridge Consultants and Engineers worldwide.

Design Chart-Strip Seal Expansion Joint:
SERIESINSTALLATION WIDTH(IW)MOVEMENT(MM
SS-80 40 80
SS-130 60 180

MODULAR STRIPE SEAL EXPANSION JOINT :

Modular Strip Seal Expansion joint is used for large movement from 0 to 2000mm. In addition to edge profiles, it has a series of supported intermediate beams and sseaks in a modular way to accommodate the movement of the joints. Each seal have a capacity to accommodate movement upto 80mm.

Why are US

* Best Comunication
* Good Responce
*.Good  Price
* Good Quality
* Timely Delivery
*.Good Transport Facility
So why are delay pl contact to SANDHYA ENTERPRISES and  start today your Business with us.
Thanks for Visit to SANDHYA ENTERPRISES Hyderabad Telangana


Additional Information:
  • Item Code: sandhyaenterprisesSSEJ
  • Production Capacity: 1000mtrs per month
  • Delivery Time: 10 days
  • Packaging Details: Open
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Sandhyaflex T Strip Seal Expansion Joint
  • Sandhyaflex T Strip Seal Expansion Joint
  • Sandhyaflex T Strip Seal Expansion Joint
  • Sandhyaflex T Strip Seal Expansion Joint
  • Sandhyaflex T Strip Seal Expansion Joint
  • Sandhyaflex T Strip Seal Expansion Joint
  • Sandhyaflex T Strip Seal Expansion Joint
  • Sandhyaflex T Strip Seal Expansion Joint
  • Sandhyaflex T Strip Seal Expansion Joint
  • Sandhyaflex T Strip Seal Expansion Joint
  • Sandhyaflex T Strip Seal Expansion Joint
  • Sandhyaflex T Strip Seal Expansion Joint
Sandhyaflex T Strip Seal Expansion Joint
Get Best Quote

Sandhyaflex T Strip Seal Expansion Joint

Approx. Price: Rs 3,700 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
Size3 inch
Usage/ApplicationBridge
MaterialMild Steel
BrandSandhyaflex
Hardness63 IRHD
Thickness10mm
FeaturesWeather Resistance and Ozone Resistance
Size/Dimension75 x 75 x 10 mm
Working Temperature-10 to 100 deg C
Sandhya Enterprises AN ISO 9001-2015 Certified Company manufacturer and Supplier of Strip Seal Expansion Joint.We are offering a wide range of Sandhyaflex Bridge Strip Seal Expansion Joint. Sandhya Enterprises manufacture of Strip Seal Expansin Joint size:40mm Gap and 70mm to 80mm movment. 16mm Dia Enchring Rod, 65 x 84 mm Edges Beamd and 75 x 84mm Edges Beam.
Payment Terms:50% Advance with Purchase Order and Balance 50% Before Delivery.Transportation by  .
ENTERPRISES provides best Strip Seal Expansion Joints in Hyderabad Strip Seal Expansion Joints consist of 2 edge beams of elastomeric sealing element and anchorages in order to ensure the water tightness of the joint. Strip seals uses have successful performances records all over several years. We use monolithic edge beam, so stability and life of the products increases and also we use tough neoprene rubber  Strip as the water barrier in the gap which has the very high life time. These edge beams which protects from damages will cause due to transfer vehicular load to the deck structure. We are appreciated among our clients for low maintenance, sturdy construction and also for high efficiency. High-class materials as per IS and MoRTH Specificaiton are used in order to fabricate these Strip Seal Expansion Joints in order to make it strong and also durable. COMPANY PROFILE Sandhya Enterprises  which is well Known for Manufacturing, Installation and also for Rehabilitation of Bridge Expansion Joints, Bridge Bearings and also for Manufacturing of Dam Gate Seals and some Other Rubber Products. We are backed up by Fully Fledged Laboratory Facilities in order to conduct various Quality Tests from Raw Materials Stage to Finished Product Stage in order to ensure Superlative Quality of Products.

 

Bridge Expansion Joint Gap 40.0mm (Movement up to 80mm). Bridge Expansion Joint consist of two edge beams with anchorages and with Neoprene sealing element held firmly in the housing of edge beams that guarantee the water tightness the joint. The maximum gap between the edge beams at the road surface when the joint fully opens due to maximum contractions of the deck shall be limited to 80mm for comfortable passage of traffic. The edge beams protects the adjacent bridge deck concrete from damage due to vehicular impact and also transfer the vehicular loads to the deck structures through robust anchorage system. Typical Bridge Expansion Joint is shown in the figure below.·         record.

·         Cost effective solution.

·         Ease of installation.

·         No mechanical anchors or metal components. Installed by compressing the seal into place.

·         Flat top surface.

·         Non-serrated top provides a smooth riding surface.

·         Neoprene  rubber.

·         Provides excellent resistance to weather, sunlight, UV, and chemical (Neoprene only).

 

Additional Information:
  • Item Code: SE-SEEJ
  • Production Capacity: 25Mtr/days
  • Delivery Time: 7 to 30 Days max
  • Packaging Details: Open
Yes! I am Interested
Watch Video
Request CallBack
  • Tie Rod End
  • Tie Rod End
  • Tie Rod End
  • Tie Rod End
  • Tie Rod End
  • Tie Rod End
  • Tie Rod End
  • Tie Rod End
  • Tie Rod End
  • Tie Rod End
  • Tie Rod End
  • Tie Rod End
  • Tie Rod End
Tie Rod End
Get Best Quote

Tie Rod End

Approx. Price: Rs 120 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity1000 Piece
Vehicle BrandSANDHYAFLEX
Diameter Size10-16 MM
TypeHeavy-duty
MaterialMild Steel
BrandSANDHYAFLEX
Surface FinishingGalvanized
A tie rod is a slender, long, threaded rod or bar with external threads on both ends, used to provide tension and structural support in a variety of applications, particularly in construction, mechanical engineering, and structural systems. Tie rods are a common structural component and serve several important purposes, such as:
1. **Structural Stability**: Tie rods are often used in construction and building structures to provide stability. They help prevent walls from spreading apart, which can be crucial for the overall integrity of a building.
2. **Tension Members**: Tie rods are tension members, meaning they are subjected to axial (tensile) forces. They are used to transfer loads and forces along their length.
3. **Vehicle Suspension**: In automotive and mechanical systems, tie rods are used in the suspension system to connect the steering knuckle to the steering gear. They help control the direction of the wheels and allow the vehicle to be steered.
4. **Mechanical Linkages**: In mechanical systems, tie rods can be used as part of linkages to transmit motion or force. They are often used in combination with other components like ball joints or bearings.
5. **Alignment and Adjustment**: Tie rods are used for alignment and adjustment purposes. In the case of vehicles, they can be adjusted to ensure proper wheel alignment.
6. **Load Distribution**: Tie rods can be used to distribute loads or forces evenly across a structure, such as in the case of truss systems or tension structures.
7. **Rigging and Tensioning**: Tie rods are used in rigging applications for tensioning purposes. They are commonly used in sailboat rigging to maintain tension in the rigging wires or cables.
Tie rods come in various sizes, materials, and designs to suit different applications. They can be made of steel, stainless steel, or other materials depending on the requirements for strength and corrosion resistance. The ends of tie rods may be threaded, and they are often used in combination with nuts, clevises, or other connectors to secure them in place and allow for adjustments.
In summary, tie rods are versatile structural elements used to provide tension, stability, and support in a wide range of applications, from building construction to mechanical systems and suspension systems in vehicles. Their design and material selection depend on the specific needs and forces they will encounter in their respective applications.

Additional Information:
  • Production Capacity: 1000 Nos per days
  • Delivery Time: 2 to 7 days
  • Packaging Details: Packing in Bag
Yes! I am Interested
Watch Video
Request CallBack
  • W Beam Metal Crash Barrier
  • W Beam Metal Crash Barrier
  • W Beam Metal Crash Barrier
  • W Beam Metal Crash Barrier
  • W Beam Metal Crash Barrier
  • W Beam Metal Crash Barrier
  • W Beam Metal Crash Barrier
  • W Beam Metal Crash Barrier
  • W Beam Metal Crash Barrier
  • W Beam Metal Crash Barrier
  • W Beam Metal Crash Barrier
  • W Beam Metal Crash Barrier
  • W Beam Metal Crash Barrier
W Beam Metal Crash Barrier
Get Best Quote

W Beam Metal Crash Barrier

Approx. Price: Rs 1,800 / MeterGet Latest Price
Product Brochure
Product Details:
MaterialGalvanized Steel
DimensionThe dimensions of a W-Beam Metal Crash Barrier, including the height, width, and thickness of the W-
Usage/ApplicationHighways and expressways
PositionExterior
End SectionFish Tail
Surface TreatmentThe primary surface treatment for W-Beam Metal Crash Barriers is often galvanization. Galvanization
Surface FinishThe surface finishing of a W-Beam Metal Crash Barrier is typically designed to provide protection ag
Colorgalvanized or metallic grey
Poles HeightThe height of the poles or posts used in conjunction with a W-Beam Metal Crash Barrier can vary base
Channel SectionThe term "channel section" in the context of a W-Beam Metal Crash Barrier refers to the shape of the
It seems you are referring to "W-beam cross barrier" in the context of road safety and guardrails. In this context, a "W-beam cross barrier" typically describes a type of guardrail or barrier used on roads, highways, and bridges to enhance safety by preventing vehicles from crossing over into opposing traffic lanes or leaving the roadway.
The term "W-beam" refers to the shape of the guardrail's profile, which resembles the letter "W" when viewed in cross-section. W-beam guardrails are made of steel and are designed to absorb and redirect the energy of a vehicle that strikes them, helping to mitigate the impact and protect drivers and passengers.
These barriers are often installed in medians, alongside curves, and at locations where there is a risk of vehicles leaving their designated lanes. The specific design and installation of W-beam cross barriers may vary depending on local regulations, road conditions, and safety requirements. They are an important component of road infrastructure aimed at reducing the severity of accidents and improving overall road safety."W beam" can refer to a few different things depending on the context. Here are a couple of common interpretations:
1. **W-Beam Guardrail:** In the context of road safety, "W beam" often refers to a type of guardrail used to prevent vehicles from running off the road or crossing into oncoming traffic. W-beam guardrails are made of steel and are designed to absorb and deflect the energy of a vehicle that impacts them, thereby reducing the risk of injury to the vehicle's occupants.
2. **W-Beam Steel Profile:** In structural engineering and construction, "W beam" may refer to a specific steel beam profile used in building and bridge construction. W-beams, also known as I-beams or wide-flange beams, have a distinctive "W" shape when viewed in cross-section. They are commonly used for their structural strength and load-bearing capabilities.
If you have a specific context in mind or need more information about a particular "W beam," please provide additional details, and I'll be happy to provide more specific information.

Additional Information:
  • Delivery Time: 7-15 days
  • Packaging Details: Standard packaging
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • GI Coated Armored Joint
  • GI Coated Armored Joint
  • GI Coated Armored Joint
  • GI Coated Armored Joint
  • GI Coated Armored Joint
  • GI Coated Armored Joint
  • GI Coated Armored Joint
  • GI Coated Armored Joint
  • GI Coated Armored Joint
  • GI Coated Armored Joint
  • GI Coated Armored Joint
  • GI Coated Armored Joint
GI Coated Armored Joint
Get Best Quote

GI Coated Armored Joint

Approx. Price: Rs 1,850 / MeterGet Latest Price
Product Brochure
Product Details:
Usage/Applicationconstruction
BrandSandhyaflex
FeaturesAs of my last knowledge update in January 2022, I do not have specific information about a product c
Country of OriginMade in India
As of my last knowledge update in January 2022, I don't have specific information about a product or technology known as "GI coated Armour Joint." However, I can provide some general features that might be associated with a product combining galvanized iron (GI) coating and an armor joint:
1. **Corrosion Resistance:** GI coating provides protection against corrosion, which is crucial for applications in various environments, especially those with exposure to moisture or harsh weather conditions.
2. **Strength and Durability:** Armor joints are often associated with strength and durability, providing robust connections or protection in applications such as structural components or military equipment.
3. **Versatility:** Depending on the specific design and application, GI coated armor joints might offer versatility, making them suitable for a range of industries and purposes.
4. **Ease of Installation:** Many joint systems aim for ease of installation, reducing the complexity and time required for assembly. This can be a significant factor in construction or manufacturing applications.
5. **Customization:** Some armor joint systems allow for customization to meet specific requirements, whether in terms of size, shape, or other characteristics.
6. **Compatibility:** GI coated armor joints may be designed to work seamlessly with other components or materials commonly used in the relevant industry or application.
7. **Cost-Effectiveness:** Depending on the manufacturing processes and materials used, these joints may be cost-effective compared to alternative solutions while still meeting performance requirements.
8. **Application-Specific Features:** The features can vary widely based on the intended application. For example, joints used in military applications might have specific features related to ballistic resistance or shock absorption.
It's important to note that these features are speculative, and the actual features would depend on the specific product or technology you are referring to. If "GI coated Armour Joint" is a term associated with a particular product or industry, I recommend checking with manufacturers, suppliers, or industry publications for the most accurate and up-to-date information.
As of my last knowledge update in January 2022, I don't have specific information about a term like "GI Coated Armour Joint." However, I can provide some general information based on the components of the term.
1. **GI Coated:** This could refer to Galvanized Iron (GI), which is iron or steel that has been coated with a layer of zinc to protect it from corrosion.
2. **Armour Joint:** This might suggest a joint or connection related to armor, which typically refers to protective materials used in various applications, such as military vehicles, body armor, or structural protection.
If this term is related to a specific product, technology, or industry that has emerged or evolved after January 2022, I recommend checking more recent and specialized sources for the latest information. You might want to look at industry publications, official documentation, or contact relevant experts or manufacturers in the field for the most accurate and up-to-date details.

Additional Information:
  • Delivery Time: 15 days
  • Packaging Details: standard packaging
Yes! I am Interested
Watch Video
Request CallBack
  • W Beam Crash Barrier
  • W Beam Crash Barrier
  • W Beam Crash Barrier
  • W Beam Crash Barrier
  • W Beam Crash Barrier
  • W Beam Crash Barrier
  • W Beam Crash Barrier
  • W Beam Crash Barrier
  • W Beam Crash Barrier
  • W Beam Crash Barrier
  • W Beam Crash Barrier
  • W Beam Crash Barrier
  • W Beam Crash Barrier
W Beam Crash Barrier
Get Best Quote

W Beam Crash Barrier

Approx. Price: Rs 2,000 / MeterGet Latest Price
Product Brochure
Product Details:
Usage/ApplicationRoads and Highways
PositionExterior, Interior
Surface TreatmentThe surface treatment of W-Beam Crash Barriers is an important aspect that influences the barrier's
Surface FinishThe surface finishing of W-Beam Crash Barriers is typically done to enhance the durability and corro
ColorWhite
It seems you are referring to "W-beam cross barrier" in the context of road safety and guardrails. In this context, a "W-beam cross barrier" typically describes a type of guardrail or barrier used on roads, highways, and bridges to enhance safety by preventing vehicles from crossing over into opposing traffic lanes or leaving the roadway.
The term "W-beam" refers to the shape of the guardrail's profile, which resembles the letter "W" when viewed in cross-section. W-beam guardrails are made of steel and are designed to absorb and redirect the energy of a vehicle that strikes them, helping to mitigate the impact and protect drivers and passengers.
These barriers are often installed in medians, alongside curves, and at locations where there is a risk of vehicles leaving their designated lanes. The specific design and installation of W-beam cross barriers may vary depending on local regulations, road conditions, and safety requirements. They are an important component of road infrastructure aimed at reducing the severity of accidents and improving overall road safety.

Additional Information:
  • Delivery Time: 15 Days
  • Packaging Details: standard packagaing
Yes! I am Interested
Request CallBack
  • Strip Seal Expansion Joint For Bridge
  • Strip Seal Expansion Joint For Bridge
  • Strip Seal Expansion Joint For Bridge
  • Strip Seal Expansion Joint For Bridge
  • Strip Seal Expansion Joint For Bridge
  • Strip Seal Expansion Joint For Bridge
  • Strip Seal Expansion Joint For Bridge
  • Strip Seal Expansion Joint For Bridge
Strip Seal Expansion Joint For Bridge
Get Best Quote

Strip Seal Expansion Joint For Bridge

Approx. Price: Rs 3,200 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
Size16 mm
Usage/ApplicationBridge Construction
MaterialMetal and Rubber
Thread SizeAs per customers requirement
Operating Temperature-10 to 100Deg C
ColorBlue and Ash
BrandSandhyaflex
Range Of Width Provided75 mm
FeaturesWeather Resistance
DiameterAs per customers requirement
Maximum PressureAs per customers requirement
Model Name/NumberStrip Seal Expansion Joint
Surface FinishingSmooth
Surface TreatmentSmooth
ThicknessAs per customers requirement

Sandhya Enterprises AN ISO 9001 2015 Certified Company of manufacturer and supplier of 16mm Dia Anchoring Rod Strip Seal Expansion Joint For Bridge.

The Strip Seal Expansion Joint system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic. In all types of constructive systems there is clear distinction between the two main functions "inflexible anchoring" and "watertight connection“. This allows for best possible adjustment of the two components sealing profile and edge construction to the conditions of the traffic road.

Strip Seal Expansion Joint Key Features:

  • Mechanically Locked Seal
  •  
  • Continuous Sealing Elements
  •  
  • Racking movement capability (Selective profile of Sealing Element)
  •  
  • Self Debris Expelling Capability
  •  
  • Less prone to Abrasion

Strip Seal Expansion Joint Description :

The Bridge deck expansion joints is an important element in the functioning of bridge structures. When joints fail to fnction properly they can create problem out of proprtion to their size. Selection of a good joints for use can create fewer bridge maintenance problems there for Indian Ministery of Roads Transport & Highways (MORT& H ) has setup certain guidelines for the Design, Manufacture and Installation of Strip Seal Expansion Joint in India.

Types Of Strip Seal Expansion Joint we Design, Manufacture, Supply, Replace, Supervision & Installation

COMPRESSION SEAL JOINT:

is used for smaller range movements from 0 to 40mm. It consist of two angles with an elastomeric seal. The seal is installed in compressed position This Joint is ideal for replacement of old joint and for new project.

Strip Seal Expansion Joint :

Strip Seal Expansion Joint is used for medium movement from 0 to 80mm. It consists of two edge profiles with an elastomeric seal in between. The edge profiles are generally cast into a noising of the structure. These Strip Seal Expansion Joint are expected performance life more than twenty five years. This is most popular and expected joint system among Bridge Consultants and Engineers worldwide.

Design Chart-Strip Seal Expansion Joint:
SERIESINSTALLATION WIDTH(IW)MOVEMENT(MM
SS-80 40 80
SS-130 60 180

MODULAR STRIPE SEAL EXPANSION JOINT :

Modular Strip Seal Expansion joint is used for large movement from 0 to 2000mm. In addition to edge profiles, it has a series of supported intermediate beams and sseaks in a modular way to accommodate the movement of the joints. Each seal have a capacity to accommodate movement upto 80mm.


Additional Information:
  • Item Code: SSEJ-SANDHYAFLEX
  • Production Capacity: 25Mtr/day
  • Delivery Time: 7 to 30 days max.
  • Packaging Details: Open
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
Strip Seal Expansion Joint
Get Best Quote

Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
Size3 inch
Usage/ApplicationIndustrial
MaterialMetal and Rubber
Thread Sizeas per dimension
Operating Temperature-10 to 100Deg C
BrandSandhyaflex
Range Of Width Provided75mm
FeaturesWeather Resistance
Sandhya Enterprises AN ISO 9001 2015 Certified Company of manufacturer and supplier of 75mm Strip Seal Expansion Joint.We are offering a wide range of Sandhyaflex Bridge Strip Seal Expansion Joint. Sandhya Enterprises manufacture of Strip Seal Expansin Joint size:40mm Gap and 70mm to 80mm movment. 16mm Dia Enchring Rod, 65 x 84 mm Edges Beamd and 75 x 84mm Edges Beam.
Payment Terms:50% Advance with Purchase Order and Balance 50% Before Delivery.Transportation by Road and Ship.
 

Additional Information:
  • Item Code: SE-BEJ
  • Production Capacity: 25Mtr/day
  • Delivery Time: 7 to 30 days max
  • Packaging Details: open
Yes! I am Interested
Watch Video
Request CallBack
  • SANDHYAFLEX Bridge Expansion Joint
  • SANDHYAFLEX Bridge Expansion Joint
  • SANDHYAFLEX Bridge Expansion Joint
  • SANDHYAFLEX Bridge Expansion Joint
  • SANDHYAFLEX Bridge Expansion Joint
  • SANDHYAFLEX Bridge Expansion Joint
  • SANDHYAFLEX Bridge Expansion Joint
  • SANDHYAFLEX Bridge Expansion Joint
  • SANDHYAFLEX Bridge Expansion Joint
  • SANDHYAFLEX Bridge Expansion Joint
  • SANDHYAFLEX Bridge Expansion Joint
  • SANDHYAFLEX Bridge Expansion Joint
  • SANDHYAFLEX Bridge Expansion Joint
SANDHYAFLEX Bridge Expansion Joint
Get Best Quote

SANDHYAFLEX Bridge Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
A bridge expansion joint is a structural component designed to accommodate the movement and deformation of a bridge caused by temperature variations, seismic activity, and other factors. Bridges are subjected to dynamic forces, and their components need to be able to expand and contract without causing damage or structural failure.
Here are some key points about bridge expansion joints:
1. **Function:**   - **Accommodate Movement:** Bridges undergo thermal expansion and contraction due to temperature changes, as well as other movements caused by factors such as seismic activity, wind, and traffic loads. Expansion joints allow for this movement.   - **Prevent Damage:** Without expansion joints, the forces generated by these movements could lead to structural damage or failure. Expansion joints help prevent such damage by allowing controlled movement.
2. **Types of Bridge Expansion Joints:**   - **Modular Expansion Joints:** Consist of separate modules that can move relative to each other. These joints often include steel plates or beams and are suitable for large movements.   - **Strip Seal Expansion Joints:** Feature a rubber sealing system that accommodates movement. These joints are often used in highway bridges and other structures.   - **Finger Joints:** Comprise overlapping steel or elastomeric fingers that can move in multiple directions to accommodate expansion and contraction.
3. **Materials:**   - **Steel:** Commonly used in modular and finger expansion joints due to its strength and durability.   - **Rubber:** Used in strip seal expansion joints for its flexibility and ability to create a watertight seal.   - **Elastomers:** Flexible materials that can withstand repeated movement and are often used in various types of expansion joints.
4. **Installation:**   - Bridge expansion joints need to be installed with precision to ensure proper functionality.   - Installation often involves securing the joint to the bridge structure and ensuring that it allows for the necessary movement.
5. **Maintenance:**   - Regular inspection and maintenance are crucial to ensure that expansion joints continue to function properly.   - Inspections may involve checking for signs of wear, damage, or misalignment and addressing any issues promptly.
6. **Importance:**   - Properly functioning expansion joints contribute to the longevity and safety of the bridge.   - They help prevent the accumulation of stress within the structure, which could lead to structural problems over time.
Bridge expansion joints play a vital role in the overall integrity and safety of bridge structures by allowing controlled movement and preventing damage from dynamic forces.

Yes! I am Interested
Watch Video
Request CallBack
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
Strip Seal Expansion Joint
Get Best Quote

Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
ColorThe color of strip seal expansion joints can vary depending on the manufacturer and the materials us
FeaturesStrip seal expansion joints are crucial components in the construction and maintenance of bridges an
Country of OriginMade in India

Bridge expansion joints are designed to allow for continuous traffic between structures while accommodating movement, shrinkage, and temperature variations on reinforced and prestressed concrete, composite, and steel structures. They stop the bridge from bending out of place in extreme conditions, and also allow enough vertical movement to permit bearing replacement [1] without the need to dismantle the bridge expansion joint. There are various types, which can accommodate movement from 30 to 1,000 millimetres (1.2 to 39.4 in), including joints for small movement (EMSEAL BEJS, XJS, JEP, WR, WOSd, and Granor AC-AR), medium movement (ETIC EJ, Wd), and large movement (WP, ETIC EJF/Granor SFEJ).

Modular expansion joints are used when the movements of a bridge exceed the capacity of a single gap joint or a finger type joint. Modular multiple-gap expansion joints can accommodate movements in all directions and rotations about every axis. They can be used for longitudinal movements of as little as 160mm, or for very large movements of over 3000 mm. The total movement of the bridge deck is divided among a number of individual gaps which are created by horizontal surface beams. The individual gaps are sealed by watertight elastomeric profiles, and surface beam movements are regulated by an elastic control system. The drainage of the joint is via the drainage system of the bridge deck. Certain joints feature so-called “sinus plates” on their surface, which reduce noise from over-passing traffic by up to 80%.

See also masonry control joints, which are sometimes used in bridge slabs.



Additional Information:
  • Production Capacity: 5000
  • Delivery Time: 15 days
  • Packaging Details: standard packaging
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
Strip Seal Expansion Joint
Get Best Quote

Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Meter
Application Areafor Construction
Binding wire, also known as baling wire, tie wire, or wire ties, is a type of wire commonly used in construction, agriculture, and various other industries for securing and binding materials together. It is typically made from materials such as steel or iron and comes in various thicknesses and lengths to suit different applications. Here are some key aspects of binding wire:
1. **Material**: Binding wire is often made from materials like steel or iron, which are known for their strength and durability. Steel binding wire is more common due to its resistance to corrosion.
2. **Diameter**: Binding wire comes in different thicknesses or gauges, typically ranging from 16 to 22 gauge. The choice of gauge depends on the specific application and the strength required.
3. **Coating**: Some binding wires may have a coating, such as galvanized or PVC coating, to enhance corrosion resistance and provide better grip when tying.
4. **Uses**:   - **Construction**: Binding wire is widely used in the construction industry to secure reinforcing bars (rebar) together in concrete structures like foundations, columns, and beams. It helps maintain the structural integrity of the concrete.   - **Agriculture**: In agriculture, binding wire is used for various purposes, such as securing plants to stakes, creating trellises for vine plants, and bundling together harvested crops for transportation and storage.   - **Packaging**: Binding wire can be used to bundle packages or items together, especially in situations where other materials like twine or straps may not be suitable.   - **Art and Crafts**: Artists and craftsmen often use binding wire in sculptures, jewelry making, and other creative projects due to its malleability and ease of manipulation.
5. **Flexibility**: Binding wire is generally flexible and can be easily bent and shaped to suit the application. This flexibility makes it versatile for various tasks.
6. **Tying Methods**: Binding wire can be twisted, looped, or tied in various ways to secure objects or materials. Specialized tools, such as pliers or wire twisters, are often used to make the process more efficient.
7. **Safety**: When using binding wire, it's important to wear appropriate safety gear, such as gloves, to protect your hands from sharp wire ends and potential injuries.
Binding wire is a crucial component in many industries, contributing to the structural stability of buildings, the organization of materials in agriculture, and the creation of artistic works. Its availability in different sizes and materials allows for a wide range of applications.

Additional Information:
  • Delivery Time: Immediate
Yes! I am Interested
Watch Video
Request CallBack
  • Gulvunized Drainage Spout
  • Gulvunized Drainage Spout
  • Gulvunized Drainage Spout
  • Gulvunized Drainage Spout
  • Gulvunized Drainage Spout
  • Gulvunized Drainage Spout
  • Gulvunized Drainage Spout
  • Gulvunized Drainage Spout
  • Gulvunized Drainage Spout
  • Gulvunized Drainage Spout
  • Gulvunized Drainage Spout
  • Gulvunized Drainage Spout
  • Gulvunized Drainage Spout
Gulvunized Drainage Spout
Get Best Quote

Gulvunized Drainage Spout

Approx. Price: Rs 1,600 / PieceGet Latest Price
Product Brochure
A galvanized drainage spout refers to a spout or downspout used in drainage systems, typically made from galvanized steel. Here's how it's used and its applications:
1. **Water Drainage**: Galvanized drainage spouts are commonly used in roofing and gutter systems to direct rainwater away from the building's foundation and landscaping. They are attached to the gutter system and extend downwards to guide the collected water safely away from the structure.
2. **Durability**: Galvanized steel is chosen for drainage spouts because of its durability and resistance to corrosion. This makes it suitable for outdoor applications where the spout is exposed to moisture and varying weather conditions.
3. **Installation**: Galvanized drainage spouts are typically installed vertically from the edge of the roof or gutter system. They may come in various lengths to accommodate different building heights and drainage requirements.
4. **Connection**: The top end of the drainage spout is connected to the gutter outlet or downspout connector, allowing water to flow from the gutter system into the spout. At the bottom, it often terminates with a splash block, drainpipe, or dispersal system to ensure the water is safely diverted away from the building's foundation.
5. **Variety**: Galvanized drainage spouts come in various shapes and sizes to suit different architectural styles and drainage needs. Some may have decorative elements or features designed to enhance the appearance of the building while effectively managing water drainage.
Overall, galvanized drainage spouts play a crucial role in maintaining proper drainage around buildings, preventing water damage to foundations, basements, and landscaping. Their durability and effectiveness make them a popular choice in residential, commercial, and industrial construction projects.

Yes! I am Interested
Watch Video
Request CallBack
Pvc Rungs Step
Get Best Quote

Pvc Rungs Step

Approx. Price: Rs 125 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Piece
Usage/ApplicationSide Walls
MaterialConcrete
ColorGrey
ShapeSquare
Size20mm , 25mm , 40mm , 50mm
DesignSolid
Quantity Per Box/BagEach Box 100 pieces
Cover blocks, in the context of WordPress and the Gutenberg editor, refer to specific types of content blocks used for creating visually appealing cover images or headings within a post or page. These blocks are part of the block-based editing system introduced in WordPress 5.0.
Here's an overview of cover blocks:
1. **Cover Image Block:** This block allows you to add a full-width or full-height background image with text or other content overlaid on it. It's commonly used for creating visually striking hero sections at the top of a page or post.
2. **Cover Text Block:** This block is often used in conjunction with the Cover Image block. It allows you to add a heading, subheading, and a button on top of the cover image, creating an engaging visual element.
3. **Cover Block Alignment:** You can set the alignment of the cover block to center, left, or right, depending on your design preferences.
4. **Block Settings:** Just like other blocks in the Gutenberg editor, cover blocks have various settings that allow you to customize their appearance and behavior. These settings might include adjusting the opacity of the background image, changing text colors, and more.
Overall, cover blocks are useful for creating attention-grabbing introductory sections or headers on your WordPress website, and they provide a simple way to combine text and images for a visually appealing design.

Additional Information:
  • Item Code: 68101110
  • Delivery Time: immediate
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
Strip Seal Expansion Joint
Get Best Quote

Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity20 Meter
MaterialMild Steel
Size65x65mm and 75x75mm
Usage/ApplicationBRIDGE EXPANSION JOINT
BrandSANDHYAFLEX
Thread Size65MM
ColorGREY
FeaturesUSED AT BRIDGE EXPANSION JOINT
Single Joint Weight28 kgs per meter
Country of OriginMade in India
  • The Strip Seal Expansion Joint System consists of a rubber gland, mechanically tightened between two steel edge members and provides a superior watertight proofing system. The design of the DECG Strip Seal System can easily accommodate.
    • The Strip Seal system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic.
      • They also help extend the life of concrete structures by providing some “give” in the movement of the structure. Expansion joints can be used in parking garages, overpasses, roadways, sidewalks, piping structures and railway tracks.
        • These Expansion Joints has been engineered so that the neoprene seal can be inserted either prior to or after the securing of the steel shapes to the superstructure. Machined Steel shapes maximize seal insatiability and minimize manufacturing tolerance associated with overall Steel shape manufacture.

Additional Information:
  • Production Capacity: 1200 METER
  • Delivery Time: DEPENDING ON SIZE AND QUANTITY
  • Packaging Details: MS ANGLE, AND RUBBER SEAL IN POLY BAG
Yes! I am Interested
Watch Video
Request CallBack
  • DRAINAGE SPOUT
  • DRAINAGE SPOUT
  • DRAINAGE SPOUT
  • DRAINAGE SPOUT
  • DRAINAGE SPOUT
  • DRAINAGE SPOUT
  • DRAINAGE SPOUT
  • DRAINAGE SPOUT
  • DRAINAGE SPOUT
  • DRAINAGE SPOUT
  • DRAINAGE SPOUT
  • DRAINAGE SPOUT
  • DRAINAGE SPOUT
DRAINAGE SPOUT
Get Best Quote

DRAINAGE SPOUT

Approx. Price: Rs 2,500 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Piece
Country of OriginMade in India
A drainage spout, also known as a downspout or gutter spout, is an integral part of a building's rainwater management system. It is designed to direct water collected from the roof gutter system away from the building's foundation, preventing water damage and erosion.
Here's how a typical drainage spout works:
1. Collection: Rainwater from the roof flows into the gutters, which are typically positioned along the roofline.
2. Conduction: The water travels along the gutters, which slope slightly downward to facilitate the flow of water towards the downspouts.
3. Diversion: At regular intervals along the gutters, downspouts are installed. These vertical pipes provide an outlet for the water to exit the gutter system.
4. Discharge: The downspout carries the water from the gutters down to the ground level or into an underground drainage system. It usually terminates with a curved or rectangular spout, known as a downspout extension, which directs the water away from the foundation of the building.
Downspouts are typically made from materials such as PVC, aluminum, galvanized steel, or copper. They come in various shapes and sizes, depending on the architectural style and functional requirements. Downspouts may be round, square, or rectangular in shape, and their size is determined by factors such as the volume of rainwater expected and the roof area being drained.
Proper installation and maintenance of drainage spouts are essential to ensure effective water management. Regular cleaning of the gutters and downspouts is necessary to prevent clogging from leaves, debris, or other materials that can hinder water flow. Additionally, downspout extensions or splash blocks should be used to divert the discharged water away from the building's foundation, preventing water-related issues such as basement flooding or soil erosion.
If you are considering installing or modifying a drainage spout system, it's advisable to consult local building codes and regulations to ensure compliance. Additionally, professional assistance or guidance from a qualified contractor or gutter specialist may be beneficial to ensure proper installation and functionality.A drainage spout, also known as a downspout or drain spout, is a component of a building's gutter system that is responsible for directing rainwater or other liquids from the roof and gutters to a designated drainage area. The purpose of a drainage spout is to ensure that water is effectively channeled away from the building to prevent water damage and erosion.
Here are some key aspects of a drainage spout:
1. Location: Drainage spouts are typically positioned at the corners or along the sides of a building, connected to the gutters that collect rainwater from the roof. They are strategically placed to allow water to flow downward and away from the structure.
2. Material: Drainage spouts are commonly made of durable materials such as metal (e.g., aluminum, copper, or galvanized steel) or plastic (e.g., PVC or vinyl). The choice of material depends on factors such as cost, aesthetic preferences, and environmental conditions.
3. Shape and Size: Drainage spouts are often cylindrical or rectangular in shape. The size of the spout can vary based on the expected volume of water to be drained. Larger buildings or areas with heavy rainfall may require larger spouts to accommodate higher water flow rates.
4. Installation: Drainage spouts are typically attached to the building's exterior wall using brackets or hangers. They are connected to the downspouts, which extend vertically from the gutters to the ground or a designated drainage system.


Additional Information:
  • Item Code: DSSF
  • Production Capacity: 100
  • Delivery Time: 7 to 15 Days
  • Packaging Details: The packing details of drainage spouts can vary depending on the manufacturer and specific product. However, here are some common packing details for drainage spouts: 1. Individual Packaging: Drainage spouts are often packed individually, with each spout placed in a separate plastic bag or wrapped in protective material. This helps prevent scratches or damage during transportation and storage. 2. Bulk Packaging: In some cases, drainage spouts may be packed in bulk quantities. They can be bundled together using straps, bands, or shrink wrap to secure them during shipping. 3. Labeling and Identification: Each packaged drainage spout typically carries labeling or marking indicating important information such as the spout size, material, manufacturer's name, and any specific instructions or warnings. This helps with easy identification and inventory management. 4. Additional Components: Depending on the specific product, drainage spout packaging may also include additional components such as brackets, screws, or connectors. These components are essential for installation and are often packed separately or included within the packaging. It's important to note that the packaging details may vary among different manufacturers and suppliers. Therefore, it's advisable to consult with the specific manufacturer or supplier from whom you intend to purchase the drainage spouts to obtain accurate and detailed information about their specific packing methods and materials. Additionally, proper handling and storage of drainage spouts are crucial to prevent any damage or deformation. It's recommended to store them in a dry and protected area to avoid exposure to moisture or extreme temperatures that could affect the spouts' integrity.
Yes! I am Interested
Watch Video
Request CallBack
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
Strip Seal Expansion Joint
Get Best Quote

Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Details:
Minimum Order Quantity50 Meter
BrandSANDHYAFLEX
FeaturesStrip seal expansion joints offer several features that make them a preferred choice for accommodati
Country of OriginMade in India
A strip seal expansion joint is a type of joint used in construction to accommodate the movement and expansion of structures, such as bridges, highways, and buildings. It is designed to provide a flexible connection between adjacent segments while maintaining a watertight seal. Here are some key details about strip seal expansion joints:
1. Structure: A strip seal expansion joint consists of several components, including steel edge beams, elastomeric seals, and anchorage systems. The steel edge beams are typically installed on each side of the joint to support the elastomeric seals.
2. Elastomeric Seals: The elastomeric seals are the key components of strip seal expansion joints. They are made of a durable and flexible material, often neoprene or natural rubber, that can withstand the movement and deformation of the joint. The seals are designed to compress and expand as the joint moves, allowing for thermal expansion and contraction.
3. Watertight Seal: One of the primary functions of a strip seal expansion joint is to provide a watertight barrier. The elastomeric seals create a seal between the adjacent structural elements, preventing the ingress of water, debris, and other contaminants. This helps protect the integrity of the structure and prolong its lifespan.
4. Movement Capability: Strip seal expansion joints are designed to accommodate both horizontal and vertical movements of the connected structures. They can handle longitudinal, transverse, and rotational movements caused by factors such as temperature changes, traffic loads, and settlement.
5. Installation: The installation process for strip seal expansion joints involves placing the steel edge beams on both sides of the joint and securing them to the adjacent structures. The elastomeric seals are then inserted between the edge beams, and appropriate anchorage systems are used to hold the seals in place.
6. Maintenance: Regular maintenance is essential to ensure the optimal performance of strip seal expansion joints. Inspection should be carried out periodically to check for any signs of damage, wear, or deterioration in the seals or anchorage systems. Proper cleaning and lubrication may also be required to maintain the flexibility and functionality of the joint.
7. Applications: Strip seal expansion joints are commonly used in bridge construction, highway and road infrastructure, parking garages, and other structures where movement and expansion need to be accommodated. They provide a reliable and cost-effective solution for maintaining the integrity of the structure while allowing for the necessary movement.
It's important to note that specific details of strip seal expansion joints, such as dimensions, load capacity, and installation requirements, may vary depending on the specific project and the manufacturer. It is recommended to consult the manufacturer's guidelines and specifications for accurate and up-to-date information.A strip seal expansion joint is a type of joint used in construction and civil engineering projects to accommodate the movement and expansion of structures, such as bridges, highways, and buildings. It consists of a series of elastomeric rubber strips held in place by metal edge profiles. The strip seal expansion joint allows for thermal expansion and contraction, as well as movement caused by seismic activity or other factors.
Here are some key features and components of a strip seal expansion joint:
1. Rubber Seals: The main component of a strip seal expansion joint is the rubber seals. These are typically made of high-quality elastomeric materials, such as neoprene or natural rubber, which have excellent flexibility, durability, and resistance to weathering and aging.



Additional Information:
  • Item Code: SSEJSF
  • Production Capacity: 100
  • Delivery Time: 7 to 15 days
  • Packaging Details: Packing Nill
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Scaffolding Clamp
  • Scaffolding Clamp
  • Scaffolding Clamp
  • Scaffolding Clamp
  • Scaffolding Clamp
  • Scaffolding Clamp
  • Scaffolding Clamp
  • Scaffolding Clamp
Scaffolding Clamp
Get Best Quote

Scaffolding Clamp

Approx. Price: Rs 96 / PieceGet Latest Price
Product Brochure
A scaffolding clamp, also known as a scaffold coupler or scaffold fitting, is a critical component in the construction and assembly of scaffolding structures. These clamps are used to connect scaffold tubes or pipes securely, forming a stable and safe scaffold framework. Scaffold clamps are designed to meet safety standards and regulations to ensure the integrity of the scaffold. There are several types of scaffolding clamps, each serving specific purposes. Here are some common types and their uses:
1. **Swivel Couplers:** Swivel couplers, also called double couplers, are used to connect two scaffold tubes at any angle. They have a swiveling joint that allows for flexibility in creating different angles and configurations within the scaffold structure.
2. **Right-Angle Couplers:** Right-angle couplers, also known as double couplers, are used to connect two scaffold tubes at a right angle (90 degrees). They provide stability for horizontal and vertical scaffold connections.
3. **Putlog or Single Couplers:** Putlog couplers, also called single couplers, are used to connect a scaffold tube to a putlog or transom, which is a horizontal component used to support scaffold boards. Putlog couplers are designed for single connections and cannot be used for tube-to-tube connections.
4. **Sleeve Couplers:** Sleeve couplers are used to connect two scaffold tubes end-to-end, extending the length of the scaffold structure. They are commonly used when longer scaffold tubes are needed for specific applications.
5. **Board Retaining Couplers:** Board retaining couplers are used to secure scaffold boards in place horizontally. They have a design that grips the scaffold board to prevent it from slipping or moving.
6. **Base Plate Couplers:** Base plate couplers are used to secure scaffold tubes to base plates or other structural components at the bottom of the scaffold structure. They help stabilize the scaffold and distribute the load evenly on the ground.
7. **Beam or Girder Couplers:** Beam or girder couplers are designed to connect scaffold tubes to steel beams, RSJs (rolled steel joists), or other structural supports. They are commonly used in more complex scaffold configurations.
8. **Rope or Tie Couplers:** Rope or tie couplers are used to secure scaffold ropes or ties to scaffold tubes. They are essential for adding stability to the scaffold structure, especially in windy conditions.
9. **Toe Board Couplers:** Toe board couplers are used to attach toe boards, which are horizontal barriers placed along the edges of scaffolding platforms to prevent tools and materials from falling.
10. **Swing Gate Couplers:** Swing gate couplers are used to create scaffold access gates, allowing workers to enter and exit scaffold platforms safely while maintaining fall protection.
Scaffold clamps are typically made from durable materials like steel and are designed to meet specific load-bearing and safety requirements. Proper selection, installation, and inspection of scaffold clamps are crucial to ensure the stability and safety of scaffolding structures. Scaffold users should be trained in the correct assembly and use of these clamps, and regular inspections should be conducted to identify and address any signs of wear, damage, or corrosion. Compliance with safety regulations and guidelines is essential when working with scaffolding.

Yes! I am Interested
Watch Video
Request CallBack
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
  • Bridge Strip Seal Expansion Joint
Bridge Strip Seal Expansion Joint
Get Best Quote

Bridge Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
BrandSANDHYAFLEX
Country of OriginMade in India
  • Strip Seal Expansion Joint system consists of an elastomeric gland mechanically locked between two steel edge members providing a superior watertight sealing system.The planned operative movement range of the Strip Seal Expansion Joint is from 0-80 mm. Movements more than 80 mm can be accommodated by using a series of 80 mm openings ( see modular ). TechStar’s Strip Seal Expansion Joint System is generally designed, manufactured and tested in accordance with AASHTO LRFD. 
  • The Strip Seal system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic.COMPRESSION SEAL JOINT: is used for smaller range movements from 0 to 40mm. It consist of two angles with an elastomeric seal. The seal is installed in compressed position This Joint is ideal for replacement of old joint and for new project. Strip Seal Expansion Joint : Strip Seal Expansion Joint is used for medium movement from 0 to 80mm,
  • The SANDHYAFLEX Compression Seal Expansion Joint System is used for small movement expansion joints, in deck of parkings, precasted structures and other types of concrete structures. The seal is compressed into place, providing a relatively flat profile surface that reduces tripping hazards and the collection of debris in the joint. Yes!

Additional Information:
  • Production Capacity: 3000 per Month
  • Delivery Time: 10 to 25 Days
Yes! I am Interested
Watch Video
Request CallBack
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
Pvc Rungs
Get Best Quote

Pvc Rungs

Approx. Price: Rs 125 / PieceGet Latest Price
Product Brochure
It seems you're asking about "PVC rungs." PVC rungs typically refer to the horizontal bars or steps on a ladder or a structure that provides footholds for climbing. These rungs are made from PVC (polyvinyl chloride), a type of plastic known for its durability, lightweight nature, and resistance to moisture and chemicals. PVC rungs are commonly used in various applications, including ladders, scaffolding, playground equipment, and more. Here are some attributes and considerations related to PVC rungs:
1. **Material**: PVC (polyvinyl chloride) is a synthetic plastic material known for its low cost, versatility, and resistance to corrosion, chemicals, and moisture.
2. **Durability**: PVC rungs are often chosen for their durability and long lifespan. They are resistant to environmental factors such as rain, UV exposure, and temperature fluctuations.
3. **Lightweight**: PVC is lightweight compared to other materials like metal, making PVC rungs easier to handle and transport.
4. **Safety**: The texture and design of PVC rungs can be designed to offer a secure grip, reducing the risk of slipping when climbing.
5. **Corrosion Resistance**: Unlike metal rungs, PVC rungs are not susceptible to rust or corrosion, which makes them suitable for outdoor applications and areas with high humidity.
6. **Electrical Insulation**: PVC is an electrical insulator, making PVC rungs a good choice for environments where electrical conductivity could be hazardous.
7. **Customization**: PVC rungs can be manufactured in various shapes, sizes, and colors to suit different ladder or structure designs and applications.
8. **Easy Maintenance**: PVC rungs are relatively easy to clean and maintain. They can be wiped down or washed without much hassle.
9. **Installation**: PVC rungs can be easily installed on ladders, scaffolding, or other structures using appropriate fasteners or attachment methods.
10. **Load Capacity**: While PVC rungs are durable, their load capacity might be lower compared to certain metals. When designing structures or ladders with PVC rungs, it's important to consider the expected weight-bearing capacity.
11. **UV Resistance**: While PVC is generally resistant to UV radiation, prolonged exposure to sunlight can cause some degradation over time. UV-resistant formulations can mitigate this effect.
12. **Environmental Considerations**: PVC is a plastic material and has environmental considerations associated with its production and disposal. Choosing recycled or eco-friendly PVC options can help mitigate these concerns.
13. **Applications**: PVC rungs can be found in various settings such as residential and commercial ladders, industrial scaffolding, playground equipment, and more.
As with any building material, proper design, installation, and maintenance practices are crucial to ensuring the safety and longevity of structures or equipment that use PVC rungs. When considering PVC rungs for a specific application, it's important to consult with manufacturers, suppliers, or experts to ensure that the chosen material and design meet the necessary requirements and standards for safety and performance.

Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Drainage Spout
  • Drainage Spout
  • Drainage Spout
  • Drainage Spout
  • Drainage Spout
  • Drainage Spout
  • Drainage Spout
  • Drainage Spout
  • Drainage Spout
  • Drainage Spout
  • Drainage Spout
  • Drainage Spout
  • Drainage Spout
Drainage Spout
Get Best Quote

Drainage Spout

Approx. Price: Rs 2,600 / PieceGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Piece
Packaging Typeloos
Country of OriginMade in India
I believe you may be referring to a "deep galvanized drainage spout" or "deep galvanized downspout." A downspout, also known as a drain spout or rainwater conductor, is a pipe or channel used to carry rainwater or water runoff from a roof or gutter system to a lower location or a drainage system. The term "deep galvanized" suggests that the downspout is made of galvanized steel and has a deeper profile or larger dimensions compared to standard downspouts.
Here are some key features and characteristics of a deep galvanized drainage spout:
1. Material: The spout is made of galvanized steel, which has been coated with a layer of zinc to provide corrosion resistance and durability. Galvanized steel is commonly used for outdoor applications due to its ability to withstand various weather conditions.
2. Depth and Profile: The deep galvanized drainage spout typically has a larger cross-sectional area or a deeper profile compared to standard downspouts. This design allows for a higher flow capacity and can accommodate larger volumes of water.
3. Connection and Installation: The deep galvanized drainage spout is typically connected to a gutter system or rainwater collection system. It can be attached to the gutter outlet or downspout adapter using appropriate connectors or fasteners. The spout is usually installed vertically and extends downward to direct the water away from the building or into a drainage system.
4. Compatibility: The deep galvanized drainage spout is designed to work with standard gutter systems and can be used in residential, commercial, or industrial applications. It can be customized or cut to the desired length to accommodate the specific requirements of the building or site.
5. Maintenance: Galvanized steel requires minimal maintenance. However, periodic inspections for blockages or debris accumulation should be carried out to ensure proper water flow. Additionally, any signs of corrosion or damage should be addressed promptly to maintain the spout's functionality and longevity.
It's important to note that local building codes and regulations may dictate the specific requirements for drainage systems, including downspouts. Therefore, it's recommended to consult with local authorities or professionals to ensure compliance with the applicable standards and guidelines.
A drainage spout, also known as a drain spout or drain outlet, is a component used in plumbing systems to direct the flow of water or other fluids. It is typically installed in areas where water needs to be efficiently drained away to prevent accumulation and potential damage.
Here are some common uses and applications of drainage spouts:
1. Roof Drainage: Drainage spouts are commonly used on rooftops to channel rainwater away from the roof and foundation of a building. They are connected to gutter systems and downspouts to ensure proper collection and disposal of rainwater.
2. Landscape Drainage: In landscaping, drainage spouts are installed to redirect water away from specific areas, such as gardens, lawns, or low-lying areas prone to flooding. They can be used in combination with underground drainage systems or surface-level solutions like French drains.
3. Plumbing Fixtures: Drainage spouts are an integral part of plumbing fixtures like sinks, bathtubs, and showers. They serve to carry wastewater from these fixtures and connect them to the main sewage or drainage system of a building.
4. Outdoor Spaces: Drainage spouts can be used in outdoor spaces like patios, decks, or pool areas to ensure proper drainage of excess water. They help prevent water accumulation, which can lead to slippery surfaces, water damage, or structural issues.
5. Industrial Applications: Drainage spouts find applications in various industrial settings where the efficient disposal of liquids is necessary. They are commonly used in factories, manufacturing plants, 

Additional Information:
  • Production Capacity: 100 per day
  • Delivery Time: 7 to 25 days
  • Packaging Details: loos
Yes! I am Interested
Watch Video
Request CallBack
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
  • Pvc Rungs
Pvc Rungs
Get Best Quote

Pvc Rungs

Approx. Price: Rs 170 / PieceGet Latest Price
Product Brochure
PVC (polyvinyl chloride) panels are versatile building materials known for their durability, affordability, and ease of installation. They find various uses across different industries and applications. Here are some common uses and applications of PVC panels:
1. **Interior Wall Cladding**: PVC panels are widely used for interior wall cladding in residential, commercial, and industrial buildings. They provide an attractive and low-maintenance alternative to traditional materials like wood, tiles, or plaster. PVC panels come in a variety of colors, textures, and finishes, allowing for versatile design options.
2. **Ceiling Panels**: PVC panels are often used for ceiling installations in homes, offices, hospitals, schools, and other buildings. They are lightweight, easy to install, and resistant to moisture, making them ideal for humid environments like bathrooms and kitchens. PVC ceiling panels also offer acoustic insulation properties, helping to reduce noise levels in interior spaces.
3. **Hygienic Wall Coverings**: In environments that require strict hygiene standards, such as hospitals, laboratories, food processing facilities, and clean rooms, PVC panels are used as hygienic wall coverings. Their smooth and non-porous surface is easy to clean and disinfect, helping to maintain a sterile environment and prevent the growth of mold, bacteria, and other pathogens.
4. **Exterior Cladding**: PVC panels can be used for exterior cladding applications, providing a weather-resistant and low-maintenance solution for facades, balconies, and exterior walls. PVC cladding panels offer excellent durability and resistance to UV radiation, moisture, and environmental pollutants, ensuring long-term performance and aesthetics.
5. **Partition Walls**: PVC panels are often used to create partition walls and room dividers in both residential and commercial settings. They offer a cost-effective and flexible solution for dividing large spaces into smaller functional areas while providing privacy and sound insulation.
6. **Retail Displays and Signage**: PVC panels are commonly used in retail environments for displays, signage, and branding purposes. They can be easily customized with graphics, logos, and text using printing or vinyl wrapping techniques, making them ideal for promotional displays, point-of-sale signage, and exhibition booths.
7. **Furniture and Cabinetry**: PVC panels are used in the manufacture of furniture, cabinets, and fixtures due to their lightweight, moisture-resistant, and easy-to-clean properties. They are commonly used for kitchen cabinets, wardrobe doors, bathroom vanities, and shelving units, offering a durable and aesthetically pleasing alternative to wood or laminates.
8. **Greenhouses and Agricultural Structures**: PVC panels are used in the construction of greenhouses, agricultural buildings, and storage facilities due to their excellent light transmission properties, durability, and resistance to corrosion. They help create a controlled environment for plant growth while providing protection against weather elements and pests.
Overall, PVC panels offer a versatile and cost-effective solution for a wide range of building and construction applications, providing durability, aesthetics, and ease of maintenance.

Yes! I am Interested
Request CallBack
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
Strip Seal Expansion Joint
Get Best Quote

Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
  • The Strip Seal Expansion Joint System consists of a rubber gland, mechanically tightened between two steel edge members and provides a superior watertight proofing system. The design of the DECG Strip Seal System can easily accommodate.
    • The Strip Seal system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic.
      • They also help extend the life of concrete structures by providing some “give” in the movement of the structure. Expansion joints can be used in parking garages, overpasses, roadways, sidewalks, piping structures and railway tracks.
        • These Expansion Joints has been engineered so that the neoprene seal can be inserted either prior to or after the securing of the steel shapes to the superstructure. Machined Steel shapes maximize seal insatiability and minimize manufacturing tolerance associated with overall Steel shape manufacture.

Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
Strip Seal Expansion Joint
Get Best Quote

Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
  • The Strip Seal Expansion Joint System consists of a rubber gland, mechanically tightened between two steel edge members and provides a superior watertight proofing system. The design of the DECG Strip Seal System can easily accommodate.
    • The Strip Seal system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic.
      • They also help extend the life of concrete structures by providing some “give” in the movement of the structure. Expansion joints can be used in parking garages, overpasses, roadways, sidewalks, piping structures and railway tracks.
        • These Expansion Joints has been engineered so that the neoprene seal can be inserted either prior to or after the securing of the steel shapes to the superstructure. Machined Steel shapes maximize seal insatiability and minimize manufacturing tolerance associated with overall Steel shape manufacture.
        • Type
        • 1 M Type
        • 2 F Type
        • 3 T Type
        • 4 W Type

Yes! I am Interested
Watch Video
Request CallBack
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
Strip Seal Expansion Joint
Get Best Quote

Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
Product Brochure
  • The Strip Seal Expansion Joint System consists of a rubber gland, mechanically tightened between two steel edge members and provides a superior watertight proofing system. The design of the DECG Strip Seal System can easily accommodate.
    • The Strip Seal system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic.
      • They also help extend the life of concrete structures by providing some “give” in the movement of the structure. Expansion joints can be used in parking garages, overpasses, roadways, sidewalks, piping structures and railway tracks.
        • These Expansion Joints has been engineered so that the neoprene seal can be inserted either prior to or after the securing of the steel shapes to the superstructure. Machined Steel shapes maximize seal insatiability and minimize manufacturing tolerance associated with overall Steel shape manufacture.
        • Type
        • 1 M Type
        • 2 F Type
        • 3 T Type
        • 4 W Type

Yes! I am Interested
Watch Video
Request CallBack
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
  • Strip Seal Expansion Joint
Strip Seal Expansion Joint
Get Best Quote

Strip Seal Expansion Joint

Approx. Price: Rs 3,000 / MeterGet Latest Price
  • SANDHYAFLEX PVC Water stoppers or water bars are flexible tape-like elements of a concrete structure that are embedded to prevent the passages of water or any fluids through concrete joints. These joints are the critical feature that challenging the water tightness in practical construction procedure as it facilitates a path for water penetration.
    • Black Pvc Water Stopper, Size: 6",8", 9".,10" N 12" Size: 6" 9". N 12" read more... read more... Brochure PVC water stopper are mainly used for tunnels, bridges, storage tanks, water and waste water treatment plants, dams, culverts and other places. It is highly resistant to corrosion, so they are widely used for waste read more... Brochure read more...
      • The installation of PVC watertsop is carried out during the concrete process, which if not performed carefully results in the damage of the PVC joint. 2. Bentonite Waterstop Bentonite waterstop is a type coming under the hydrophilic waterstop category. Bentonite, as we know is a swellable clay compound.
        • Waterstops are mainly used for the waterproofing of below-grade concrete structures like tunnels, water treatment facilities, parking structures, water reservoirs, sewage treatment facilities, and marine structures. The basic features and types of waterstops used in construction are explained briefly in the article.
        • PVC Water stopper with Center Bulbe
        •  Width     150  200 230   250   300
        • Thicknes 4      5      5       6       6
        •                 5     6      6       8        8
        •                 6     10     8      10      12
        •                8       12    10     12      15
        •                10      

Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Tie Rod For Construction
  • Tie Rod For Construction
  • Tie Rod For Construction
  • Tie Rod For Construction
  • Tie Rod For Construction
  • Tie Rod For Construction
  • Tie Rod For Construction
  • Tie Rod For Construction
  • Tie Rod For Construction
  • Tie Rod For Construction
  • Tie Rod For Construction
  • Tie Rod For Construction
  • Tie Rod For Construction
Tie Rod For Construction
Get Best Quote

Tie Rod For Construction

Approx. Price: Rs 105 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity100 Meter
ThicknessAs per customers requirement
BrandSandhyaflex
MaterialRubber
Size100 to 350mm
ShapeCircle
ColorBlack
DiameterAs per customers requirement
Elongation400%
FinishSmooth
Hardness60 Shore A
Country of Origin Made in India
Material Cast Iron
Thickness
Brand
Surface Treatment Power Coated
Usage/Application Construction
Minimum Order Quantity 3 Meter

Additional Information:
  • Production Capacity: 100 numbers
Yes! I am Interested
Watch Video
Request CallBack
  • Compression Seal Expansion Joint for Bridge
  • Compression Seal Expansion Joint for Bridge
  • Compression Seal Expansion Joint for Bridge
  • Compression Seal Expansion Joint for Bridge
  • Compression Seal Expansion Joint for Bridge
  • Compression Seal Expansion Joint for Bridge
  • Compression Seal Expansion Joint for Bridge
  • Compression Seal Expansion Joint for Bridge
  • Compression Seal Expansion Joint for Bridge
  • Compression Seal Expansion Joint for Bridge
  • Compression Seal Expansion Joint for Bridge
  • Compression Seal Expansion Joint for Bridge
  • Compression Seal Expansion Joint for Bridge
Compression Seal Expansion Joint for Bridge
Get Best Quote

Compression Seal Expansion Joint for Bridge

Approx. Price: Rs 4,300 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
Size100mm
MaterialMS Steel and Neoprene Seal
BrandSandhyaflex
Surface FinishSmooth Finish
Operating Temperature27 to 50 Deg C
ColorGrey Color
Thread Size100mm x 100mm
Range Of Width Provided100mm
Usage/ApplicationBridge Construction
Featuresrecord. - Cost effective solution. - Ease of installation. - No mechanical anchors or metal componen
Corrosion Resistancerecord. - Cost effective solution. - Ease of installation. - No mechanical anchors or metal componen
Diameter100x100x10mm Edge Beam
FinishingSmooth
Hardness58-68 Shore A
Elongation at Break350%
Tensile Strength11 MPa
Sandhya Enterprises Manufacturer and Supplier of Compression Seal Expansion Joint for Bridge.We are offering a wide range of Sandhyaflex Bridge Strip Seal Expansion Joint. Sandhya Enterprises manufacture of Strip Seal Expansin Joint size:40mm Gap and 70mm to 80mm movment. 16mm Dia Enchring Rod, 65 x 84 mm Edges Beamd and 75 x 84mm Edges Beam.
Payment Terms:50% Advance with Purchase Order and Balance 50% Before Delivery.Transportation by Road and Ship.
 
SANDHYA ENTERPRISES have been manufacturing,Supplier, exporter excellent quality creates sealing pressure by the use of reaction of rubber which is due to compressive deformation of the rubber profile. Compression seals which allows to successfully seal expansion joint. Elastomeric element which is highly resistant to deterioration from exposure to weather, sunlight, oils and also impact. our experts will not compromise only with normal quality and make sure that quality-approved rubber is used in the manufacturing process. Tested on several and different parameters of quality, provided Compressor Seal is available at pocket-friendly prices for the client. The provided seal is manufactured with utmost precision by the use of exceptional quality raw materials and also with use of pioneering technology.  

 

The SANDHYAFLEX Compression Seal Expansion Joint System is an extruded, neoprene rubber material. When compressed into a gap, this system provides an excellent sealing against the expansion and contraction.

Usage

The SANDHYAFLEX Compression Seal Expansion Joint System is used for small movement expansion joints, in deck of parking’s, precasted structures and other types of concrete structures.

Benefits

The seal is compressed into place, providing a relatively flat profile surface that reduces tripping hazards .

PRODUCT CODE

SUITABLE JOINT OPENING

A

B

MOVMENT

SANDHYAFLEX-35

25

35

20

20

SANDHYAFLEX--50

35

50

50

25

SANDHYAFLEX-75

60

75

75

35

SANDHYAFLEX-100

75

100

75

50

SANDHYAFLEX-125

100

125

100

60

SANDHYYFLEX-150

125

150

100

75



Additional Information:
  • Item Code: SANDHYAFLEX-BCSEJ
  • Production Capacity: 25Mtr/day
  • Delivery Time: 15 to 30 days
  • Packaging Details: Open
Yes! I am Interested
Watch Video
Request CallBack
  • Pot Ptfe Bearing
  • Pot Ptfe Bearing
  • Pot Ptfe Bearing
  • Pot Ptfe Bearing
  • Pot Ptfe Bearing
  • Pot Ptfe Bearing
  • Pot Ptfe Bearing
  • Pot Ptfe Bearing
  • Pot Ptfe Bearing
  • Pot Ptfe Bearing
  • Pot Ptfe Bearing
  • Pot Ptfe Bearing
  • Pot Ptfe Bearing
Pot Ptfe Bearing
Get Best Quote

Pot Ptfe Bearing

Approx. Price: Rs 25,000 / PieceGet Latest Price
Product Brochure
Binding wire, often referred to as bale wire or soft wire, is a versatile type of wire commonly used in various applications across different industries. Here are some common uses and applications of binding wire:
1. **Construction Industry:**   - **Use:** Binding wire is extensively used in the construction industry for securing and fastening various construction materials, such as reinforcing bars (rebar).   - **Application:** It is employed to tie together intersecting bars of rebar to create a rigid and reinforced structure in concrete construction projects.
2. **Packaging and Bundling:**   - **Use:** Binding wire is used in packaging and bundling applications.   - **Application:** It helps secure and bundle items together, such as cardboard boxes, pipes, or other materials, for ease of handling, transportation, and storage.
3. **Fencing and Wire Mesh Installation:**   - **Use:** Binding wire is commonly used in the installation of fencing and wire mesh.   - **Application:** It is used to secure the individual components of the fence or wire mesh, providing stability and ensuring that the structure remains intact.
4. **Agriculture:**   - **Use:** Binding wire finds applications in agriculture.   - **Application:** It is used to secure and tie together plants, vines, or branches, providing support in gardening and agricultural activities.
5. **Art and Craft Projects:**   - **Use:** Binding wire is used in art and craft projects.   - **Application:** Artists and crafters use binding wire to create wire sculptures, jewelry, or to bind together different artistic elements.
6. **Bookbinding:**   - **Use:** Binding wire is utilized in the bookbinding process.   - **Application:** It is used to secure the pages and cover of a book, providing a durable and secure binding.
7. **Temporary Repairs:**   - **Use:** In emergency situations, binding wire can be used for temporary repairs.   - **Application:** It can be employed to secure broken parts of machinery, equipment, or structures until proper repairs can be made.
8. **Home and Garden Use:**   - **Use:** Binding wire has applications in various household and garden tasks.   - **Application:** It can be used to tie together plants, organize cables, or for DIY projects around the home and garden.
9. **Automotive Repairs:**   - **Use:** In automotive repairs, binding wire can be a temporary solution.   - **Application:** It can be used to secure loose components or hold parts together until proper repairs are undertaken.
10. **Recycling Industry:**    - **Use:** Binding wire is used in recycling facilities.    - **Application:** It helps bundle together recyclable materials such as paper, cardboard, or metal, facilitating handling and transportation.
Binding wire comes in various gauges and lengths, providing flexibility for different applications. The wire is often malleable, making it easy to twist and secure items together. Its strength and versatility make it an essential tool in various industries and everyday tasks.

Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • 250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
  • 250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
  • 250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
  • 250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
  • 250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
  • 250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
  • 250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
  • 250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
  • 250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
  • 250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
  • 250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
  • 250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
  • 250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint
Get Best Quote

250mm per Mer Anchoring Rod welded Strip Seal Expansion Joint

Approx. Price: Rs 3,700 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
BrandSANDHYAFLEX
ColorAsh
FeaturesStrip Seal Expansion Joint system consists of an elastomeric gland mechanically locked between two s
Single Joint Weight30kg/Mtr
Elongation At Break400%
Country of OriginMade in India
  • Strip Seal Expansion Joint system consists of an elastomeric gland mechanically locked between two steel edge members providing a superior watertight sealing system.The planned operative movement range of the Strip Seal Expansion Joint is from 0-80 mm. Movements more than 80 mm can be accommodated by using a series of 80 mm openings ( see modular ). TechStar’s Strip Seal Expansion Joint System is generally designed, manufactured and tested in accordance with AASHTO LRFD. 
  • The Strip Seal system is a unique concept for effectively sealing expansion joints in bridges and structures with movements up to 125 mm. Single-Seal Expansion Joints are available in different versions for constructive systems exposed to traffic.COMPRESSION SEAL JOINT: is used for smaller range movements from 0 to 40mm. It consist of two angles with an elastomeric seal. The seal is installed in compressed position This Joint is ideal for replacement of old joint and for new project. Strip Seal Expansion Joint : Strip Seal Expansion Joint is used for medium movement from 0 to 80mm,
  • The SANDHYAFLEX Compression Seal Expansion Joint System is used for small movement expansion joints, in deck of parkings, precasted structures and other types of concrete structures. The seal is compressed into place, providing a relatively flat profile surface that reduces tripping hazards and the collection of debris in the joint. Yes!

Additional Information:
  • Production Capacity: 3000 per Month
  • Delivery Time: 10 to 25 days
Yes! I am Interested
Watch Video
Request CallBack
  • Compression Seal Expansion Joint 100mm
  • Compression Seal Expansion Joint 100mm
  • Compression Seal Expansion Joint 100mm
  • Compression Seal Expansion Joint 100mm
  • Compression Seal Expansion Joint 100mm
  • Compression Seal Expansion Joint 100mm
  • Compression Seal Expansion Joint 100mm
  • Compression Seal Expansion Joint 100mm
Compression Seal Expansion Joint 100mm
Get Best Quote

Compression Seal Expansion Joint 100mm

Approx. Price: Rs 4,300 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity50 Meter
Size100mm
Thread SizeProduct The SANDHYAFLEX Compression Seal Expansion Joint System is an extruded, neoprene rubber mate
MaterialMetal and Rubber
BrandSandhyaflex
Operating Temperature-10 to 100 Deg C
ColorGrey Color Spray Painting
Usage/ApplicationBridge Construction
FeaturesHigh Strenght
Corrosion ResistanceCorrosion Resistance to Weather
Diameter100x100 Edges Beam
Finishingsmooth
Maximum PressureProduct The SANDHYAFLEX Compression Seal Expansion Joint System is an extruded, neoprene rubber mate
Hardness63 Shore A
Model Name/NumberCSEJ-SANDHYAFLEX
Seal JointStrip Seal Expansion Joint
Nominal PressureProduct The SANDHYAFLEX Compression Seal Expansion Joint System is an extruded, neoprene rubber mate
Size/Dimension75mm and 65mm
Pressure RatingProduct The SANDHYAFLEX Compression Seal Expansion Joint System is an extruded, neoprene rubber mate
Steel Beam75 mm and 65mm
ShapeSquire
Stud Diameter16mm Dia
Surface TreatmentSand Blasting and Spray Painting
Surface FinishingSmooth
Thickness10mm
Working Temperature-10 to 100 Deg C

We are offering a wide range of 100mm Edges Beam Compression Seal Expansion Joint.

SANDHYA ENTERPRISES provides best Comperession Seal Expansion Joints in Hyderabad Strip Seal Expansion Joints consist of 2 edge beams of elastomeric sealing element and anchorages in order to ensure the water tightness of the joint. Strip seals uses have successful performances records all over several years. We use monolithic edge beam, so stability and life of the products increases and also we use tough neoprene rubber  Strip as the water barrier in the gap which has the very high life time. These edge beams which protects from damages will cause due to transfer vehicular load to the deck structure. We are appreciated among our clients for low maintenance, sturdy construction and also for high efficiency. High-class materials as per IS and MoRTH Specificaiton are used in order to fabricate these Strip Seal Expansion Joints in order to make it strong and also durabl

·         Proven record.

·         Cost effective solution.

·         Ease of installation.

·         No mechanical anchors or metal components. Installed by compressing the seal into place.

·         Flat top surface.

·         Non-serrated top provides a smooth riding surface.

·         Neoprene  rubber.

 

Bridge Expansion Joint Gap 40.0mm (Movement up to 80mm). Bridge Expansion Joint consist of two edge beams with anchorages and with Neoprene sealing element held firmly in the housing of edge beams that guarantee the water tightness the joint. The maximum gap between the edge beams at the road surface when the joint fully opens due to maximum contractions of the deck shall be limited to 80mm for comfortable passage of traffic. The edge beams protects the adjacent bridge deck concrete from damage due to vehicular impact and also transfer the vehicular loads to the deck structures through robust anchorage system. Typical Bridge Expansional Expansion Joint- Sandhya Enterprises an ISO 9001:2015 Certified Company manufacturing and supplier an Exporter of Slab Seal Expansion as per MORTH

Technical Details
Sr No.TestUnitSpecification and Testing MethodSpecimens
1 Hardness IRHD IS: 3400 (Part II) Cl.5.1.2.2 4.0mm (min ) thickness of Test specimen
2 Tensile Strength MPa IS:3400 ( Part I) Thick- 2.0 +.0.20mm
3 Elongation at Break % Table 1 Type -1 Width 6.0 + 0.40mm Bench Mark-25..0mm(max)
4 Adhesion Strength (Metal to Rubber KN/M IS:3400 ( Part XIV) Cl.3.3 Length -125mm Width-25mm


Width-25mm 1 g (min)
5 Ash Content % IS:3400 (Part XXII) 1 g (min)
6 Polymer Identification Chemically Cl. A-8.3.1 IS 0.5 g (min)
7 Percentage of Polymers % IS 1 g (min)
8 Compression Set % IS: 3400 (Part X) Cl. 5.1 Thick -12.5 + 0.50mm Dia-29 + 0.50mm

Additional Information:
  • Item Code: CSEJ-SANDHYAFLEX
  • Production Capacity: 1000 R. Mtr /Month Min
  • Delivery Time: 15 to 45 Days max
  • Packaging Details: Open
Yes! I am Interested
Watch Video
Request CallBack
  • Neoprene Strip Seal
  • Neoprene Strip Seal
  • Neoprene Strip Seal
  • Neoprene Strip Seal
  • Neoprene Strip Seal
  • Neoprene Strip Seal
Neoprene Strip Seal
Get Best Quote

Neoprene Strip Seal

Approx. Price: Rs 450 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity500 Meter
Size3 inch
Usage/ApplicationBridge Construction
MaterialMetal and Rubber 3 Type of Strip Seal Expansion Joiny 1. F Type Strip Seal Expansion Joint 2. M Type
Thread Size3 Type of Strip Seal Expansion Joiny 1. F Type Strip Seal Expansion Joint 2. M Type Strip Seal Expan
Operating Temperature-10 to 100 Deg C
ColorGray
BrandSandhyaflex
ShapeRound
Hardness63 IRHD
Working Temperature10 to 50 Deg C
Steel Beam3 Type of Strip Seal Expansion Joiny 1. F Type Strip Seal Expansion Joint 2. M Type Strip Seal Expan
FeaturesLoad Resistance
Country of OriginMade in India
Sandhaya Enterprises manufacturer and Supplier of Sandhyaflex 3 Inch Strip Seal Expansion Joint.We are offering a wide range of Sandhyaflex Bridge Strip Seal Expansion Joint. Sandhya Enterprises manufacture of Strip Seal Expansin Joint size:40mm Gap and 70mm to 80mm movment. 16mm Dia Enchring Rod, 65 x 84 mm Edges Beamd and 75 x 84mm Edges Beam.
Payment Terms:50% Advance with Purchase Order and Balance 50% Before Delivery.Transportation by Road and Ship.
3 Type of Strip Seal Expansion Joiny
1. F Type Strip Seal Expansion Joint
2. M Type Strip Seal Expansion Joint
3. T Type Strip Seal Expansion Joint


Additional Information:
  • Item Code: SANDHYAFLEX-SSSSEJ
  • Production Capacity: 25Mtr/day
  • Delivery Time: 7 to 30 days max.
  • Packaging Details: open
Yes! I am Interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Rubber Strip Seal
  • Rubber Strip Seal
  • Rubber Strip Seal
  • Rubber Strip Seal
  • Rubber Strip Seal
  • Rubber Strip Seal
  • Rubber Strip Seal
  • Rubber Strip Seal
  • Rubber Strip Seal
  • Rubber Strip Seal
  • Rubber Strip Seal
  • Rubber Strip Seal
  • Rubber Strip Seal
Rubber Strip Seal
Get Best Quote

Rubber Strip Seal

Approx. Price: Rs 400 / MeterGet Latest Price
Product Brochure
Product Details:
Minimum Order Quantity1000 Meter
BrandSANDHYAFLEX
FeaturesStrip Seal is a mechanical device adapted for sealing an elongated gap formed between two adjacent r
Corrosion ResistanceStrip Seal is a mechanical device adapted for sealing an elongated gap formed between two adjacent r
DiameterStrip Seal is a mechanical device adapted for sealing an elongated gap formed between two adjacent r
ShapeStrip Seal is a mechanical device adapted for sealing an elongated gap formed between two adjacent r
Product TypeStrip Seal is a mechanical device adapted for sealing an elongated gap formed between two adjacent r
End ConnectionStrip Seal is a mechanical device adapted for sealing an elongated gap formed between two adjacent r
Packaging TypeStrip Seal is a mechanical device adapted for sealing an elongated gap formed between two adjacent r
Country of OriginMade in India
SANDHYAFLEX
Strip Seal for Expansion Joint
1 F Type
2 T Type
3 W Type
4  M Type

Additional Information:
  • Production Capacity: 50
Yes! I am Interested
Watch Video
View More

Explore more products

X